Reviews
Cost performance is good
Frequently running Circuit 1 ~ Quantity : 2 Set I am saved because I use it so cheap.
The rubbing comfort is not bad, and I think that it is good not to make such a large sound even if it is grounded.
It is good not to soil the Circuit as it melts away as it does not peel off and it stretches sideways.
View detail
Good visibility
I used it to confirm the Lap time in Circuit.
I liked it because the Compact installation was easy and the visibility was good.
Especially because we can confirm the overall best update with Green and Red Lamp
You can concentrate on running without having to look firmly.
Battery built-in so you do not need Wiring is good.
For Replacement Battery also released is Point high!
Unfortunately we lost HomeCourse's magnetic bar so I could not use it
I think that it is better to go to the available Course.
View detail
Dissatisfied, Cospa OK
There is no dissatisfaction.
Cost pa is also not bad.
Although it is about installation, I think that it can be completed without problems if it is a person who can do Wiring processing.
Since I do not want to change Headlight, it was an LED or HID, but Case was small, so if it is an LED, since the heat sink does not enter, it is purchased for HID conversion.
The price was also cheap and the reputation was not bad,
Although I used impressions, Size was just right better than I thought.
Ballast's Size is also a good feeling, not being conspicuous without tearing Large.
The amount of light is brighter than I thought, the visibility has improved dramatically.
Honestly the power consumption does not change until then. It is a degree of feeling
View detail
Satisfied with Cospa
There are times when it does not respond occasionally when passing through magnetism while banking, but this price is not complicated.
It rarely happens not to pick up magnetism.
At first I thought that the screen looked as big as Design, but as long as I'm running this is just right.
One disappointing point is that Film was not found on the screen and scratched, despite being a brand new.
Well, I thought that I wanted to use it immediately, if I used it, I thought that it would scarred anyway and I used it as it was...
View detail
![ZiiX Lap Timer Body [for Repair]](https://img.webike-cdn.net/catalogue/18451/zii_lap_timer_TS.jpg)
One device for installation
How to use is very easy, the visibility of Display is no problem.
One method is necessary to install the magnetic sensor. Because it is a Universal Product, we have to select a mounting position well and purchase Bracket separately. Also, depending on the circuit, it may be difficult to sense magnetism, so it is better to approach the ground as much as possible.
I pasted Display with Magic tape on the Bracket of the included Bracket and Pipe Handlebar.
Since the attached battery was quickly cleared, we recommend that you purchase spares without relying on it.
View detail
Reasonable
I am using it in Circuit driving.
It is possible to install it without fault especially to the leather connection of Fodo.
I feel that it is somewhat harder compared with what I originally attached, feeling rubbing is coming well.
Most importantly, since it is less than half the Manufacturer item, we can recommend it to those who do not care about the appearance.
View detail
![ZiiX Time Gauge Sensor [for Repair]](https://img.webike-cdn.net/catalogue/18451/sens2_1_TS.jpg)
Fits: その他 ZiiX Lap Timer Time Attacker
Purchased as for Repair
Sensor used previously was poorly installed, so it became possible to see the contents while being shaved in the bank, so we bought a new article for Sensor only. Sensor 's response was bad, so I expected to improve it.
So, as for the reaction of Sensor, after all, even if we exchange it for a new article it did not get better...
It seems that it is also in the Course, but it seems like it reacts exactly after 10 cm or less from the ground.
I want the sensitivity of the Sensor to be raised a little more.
View detail
It is a good feeling..
I bought it for use in Leather suit.
Although it is a low price, it is hard to get caught or gapped when wearing or removing a leather suit, and usability is good. It is a good feeling because the feeling of pressure when wearing is less than what I used to date.
View detail
If Lap timer ZiiX
Lap timers are issued from various Manufacturers, but considering Cospa, I think the Lap timer of this LeverLight is the best.
Although I used P-LAP 3, first of all Body's Small size is good.
PLAP is not bad, but the thickness of Body will definitely get in the way.
On that point, this Lap timer is Small Type and there is nothing to worry about the installation location.
View detail
Spinal Pad
Anyway COSPA is the best.
Although it was used in the Leather suit, there is no sense of incongruity that it carries Spinal Pad.
Since those of other Manufacturers are nearly double the price, for now tentatively, please try using this Spinal Pad.
View detail
Knee Slider
Among Knee Slider, it is a gem superior to Cospa.
Since leather Pants was added, it is purchased again in order to replace it with this product.
The rubbing feeling is very good, if there is a degree to play at the pass, Life is long because there are quite a lot of thickness.
Because it is a consumable item, I think that it is the cheapest one.
View detail
Knee Slider
Among Knee Slider, I finally end up going to this product if it is a cospa superior item, and I purchase it again.
The rubbing feeling makes crispness and sound, but there is no catch and the feel is very good.
Hardness is somewhat soft, but I think that Life is long because it is thick.
Also, since this product has no directionality, even if it is turned upside down, there is no discomfort, so it can be completely used up to the end.
View detail
Click LeverLight : CLEVER LIGHT Knee Slider
Adhesion between Slider and Slider base is sweet, so when we bent the knee, some adhesion was peeled off. After seeing the state for a while, if peeling of adhesion seems to progress, I will never purchase it again.
Because the thickness of the Slider itself is firm as much as the price, I am sorry just because I was planning to purchase it in the future.
View detail
Easy to use with simple operation.
Measuring laps, looking at past laps, etc. is easy and it will be readily available without having to look through Instruction Manual many times. I think that installation is not so difficult, but since it is perfect Universal Product, trial and error is necessary to install TimerBody and Sensor. If TimerBody is not installed in a place with sufficiently good visibility, it will lead to loss time due to difficulty in viewing.
View detail
Excellent Knee Slider in COSPA
Because it is a consumable item, we were looking for cheap and excellent Cospa items. In the Knee Slider it might be in the cheaper classification. Feeling when I rub it is also good for Fing Ring and I am happy with Hy?go. However, it seems that it is a little soft sex or a decrease is early.
If I say selfishness it will be a little harder, and I'm glad if it is thick.
View detail
Function is enough!
While I was running Circuit, I did not have the Lap timer so far, so I only ran as much as I did so purchase to confirm Time.
I checked the operation with Mobara Circuit.
Although it is best to attach directly under the center of the vehicle, try installing the position where the Side Stand was attached. Then, by rubbing the sensor with LeftCorner.
But there is Toko that do not when you sense the porcelain bar, went on trouble position.
In the locality, I had the Bracket I had and the position to be attached was limited, so this time I installed it with Under Cowl Bracket. I was tentatively being there, so it was temporary position.
Meter itself is displayed with a large numerical value, so Time is easy to see while driving. Once the best time comes out it will be displayed as BEST once.
The function can measure only the number of laps and Time, but for me it is enough.
I do not know whether Sensor's sensitivity or porcelain bar problem, but since we often do not read porcelain, we will look at other circuits as well.
After that, I think that it is good whether the price is a bit cheaper.
View detail
Repeat
I used the same Knee Slider, but since I got worn away repurchase.
If I was expecting too much durability and scratching, Right Side was lost in Tsukuba Circuit in a blink of an eye.
It was caused by the form which runs by pushing the knees, but the road surface of the final Corner of Tsukuba was repaired and it became possible to be able to shave well - - -
Because there is more thickness than other Knee Slider, I feel that Sensor's hits start earlier than I expected.
Still COSPA is the best, so I think that we will continue to use this Sensor for the time being.
View detail
StandardLap timer corresponding to various circuits
Mounting vehicle : MT-09
For running Circuit, you need Lap timer.
- Magnetic sensing type ← This product is Type
- Red external line reception formula
- GPS measurement formula
There are various methods such as
- Magnetic sensing type corresponds to Circuit nationwide
- Relatively good accuracy compared to price
⇒Red external line formula seems to be difficult to adjust the direction of the transceiver.
⇒ GPS equation becomes expensive when it obtains accuracy.
- A certain Ama ○ onetc. Though cheap Chinese-made things are sold, it is not reliable
I purchased this product from the above.
Product is Body (Display Monitor section) And the magnetic sensor part. Power supply to Body battery (CR 2032 X Quantity : 2pc. Set) or vehicle 12V withdrawal. Since I want to check Time to detach it after driving and move it with a battery. It seems to have about 10 hours.
Note that Memory of Time can be up to 999 LAP, but Data Extraction (USB or SDCard) Because it is impossible, I'm dedicating to Excel by 1 LAP each time by hand (^^;)
Also, interval Time can not be measured.
Sensor installation location is limited,
- Road surface (Embedded magnet) Set within 15 cm from
- There is no Gold genus between the road surface and the sensor (Resins are OK)
- It is desirable to set it in the middle of Tire
Therefore, depending on the vehicle it will have difficulty in the installation position.
In the case of MT - 09, considering the above limitation, there are not many choices of installation sites, I installed the Side stands switch Bolt (M5) Extended, Bracket attached from the back and fixed. Because it is a self-propelled group, it is fixed only with Circuit, so the butterfly screw is stopped, but it does not loosen at all (Just to be sure, we check each run). But even at this position Clearance with the road surface is quite severe, once I exchanged the Tire pressure and made a full bank I rubbed a bit - - - I did not break down. I have no choice but to make fine adjustments
Functional aspects are satisfied as minimum lap time measurement can be done with reasonable precision. However, if you look at the price made in China, I think that it will be a little cheaper (At least ten thousand yen will expire). In that respect, we made it four ☆.
View detail
Yoshi Yoshi
Since it was used in R6, I attached it referring to the item description. Results could be used without problems. Is the problem a distance adjustment from the ground?. I used it by pasting it on the Oil pan of Full cowl first, and I was able to use it. It was cheap but it was very good.
View detail
Cospa strongest
Since I was worried about before, I bought it with Timing where Knee Slider I used was gone.
I used six 15 minutes X 6 in Circuit, but it does not decrease internally.
Compared to Komine's Knee Slider for the previous Leather suit, it is very hard.
As a comfortable feeling, rubbing the Sensor and pushing it further into the knee to further defeat it, the Sensor "Contcon cons" I felt like I was bouncing, there was a feel like being hardened or being repelled from the ground. It may be sensitive to gaps on the road
I felt it was because it was a soft Slider before, but I think that it is personal difference as it is familiar.
Because performance is perfect against COSPA, people want you to try gold on Sensor by all means.
View detail