Reviews
Genuine Brembo Oil Tank 45ml for front master cylinder overhaul
I purchased this as I changed out my stock MT10 master cylinder witht he Brembo reservoir kit in clear. I did however want to try the smoke colour too, so I just purchased this tank. This was obviously an essential part for the upgraded master cylinder to work. The price was awesome, much cheaper than I have seen elsewhere. I already upgraded to the Brembo reservoir kit and wanted to change the colour tank. The shipping was very reasonable and as this was an additional item with others it worked out very good indeed. When this was delivered to me which took around a week, as always, the packaging was excellent, again, as always. No damage to anything within this order.The workmanship of the parts in this kit were flawless. I had already removed the old clear tank and it was a simple replacement for the smoke grey one. This does look a lot better than the clear one and just adds a bit more fun to the bike. Thanks again Webike, great service View detail
Genuine Brembo Oil Tank with straight outlet
Aa customer who needed a new one to replace their old tired looking oil tank and I decided on the Brembo brand. I already had a good knowledge of the correct parts needed for the job and found all I needed from Webike. The cost of the genuine Brembo reservoir is excellent. I don't even know if a cheap after market pot is any cheaper really.Other parts were also in this order and I could make the shipping a lot better by adding more than 1 or 2 parts to the order. EMS fast is what I used and I am totally happy with how quick they are. 4 days is all it took from Japan to the UK. I even ordered these parts on a Froday evening in the UK, shippedlate Sunday here in the UK and arrived Tuesday.All the parts in this order were very well packaged, additional filler was used to make sure no parts could ove and damage any others inside.The reservoir pot in a great piece of kit, you know you are getting quality from Brembo. It's what they do. The pipe ends were well finished, nice and smooth, no sharp bits at all. The cap was tough to get screwed on but you do not want a cap that comes off with vibration, don't ask me how I know this. That was not a very good day at all.Fitted to the clutch master cylinder really quickly. Customer is very pleased and so am I. Great work Webike. View detail
Fits: Others , Others , DUCATI M900, DUCATI M750, DUCATI M400, DUCATI 916STRADA, DUCATI 900SS, DUCATI 750SS, DUCATI 748, APRILIA RS250
It is also used in Circuit.
It is not a type that is as effective as the Red Pad, which has been sintered, so it is not likely to be easily choked.
The absolute braking power is not as good as ZCOO or Metallica, but the control is excellent.
As for durability, it will not last as long as the 2Brand I mentioned before because it will decrease more than expected.
View detail
Fits: Others , DUCATI S4R S, Others , DUCATI 999S, DUCATI 999S AMA, DUCATI 999R, DUCATI 999R XEROX, DUCATI 999, DUCATI 998R, DUCATI 998S, DUCATI 996R, DUCATI 749S, DUCATI 749R, DUCATI 749, DUCATI 748RS, DUCATI 749 DARK, DUCATI 748R, APRILIA RSV1000, APRILIA RSV1000 R
Cuckoo Brake has been eliminated.
I bought this pad from brembo, the same manufacturer as the OEM pad, because the OEM pad was about half full after 7000 km. I'm sure it will be black soon with Dust (lol).
It is said that some pads from other manufacturers do not have a thick enough back plate, but you can be assured that the back plate is the same thickness as that used for OEM products.
By the way, Webike's compatibility does not mention S1000RR (K46) compatibility, but you can use this pad.
After the replacement, the car has traveled about 100 km and has started to bite, so I will make an Impression.
As with all radial mount calipers, pad replacement is very easy. It would have taken me about 30 minutes to replace the pad, but I didn't have time this time, so I only did a simple cleaning.
Fee Ring during braking
The OEM product pad is a type that has strong initial braking force, and is effective with just a little grip, like a four-wheeled BMW.
I have been riding only JAPAN Motorcycle for many years, and this one is easier to ride.
It is a very desirable Type with excellent Controllability for me, as I do a lot of city driving.
?Braking force
I had the opportunity to perform emergency braking several times while driving, and the braking force is comparable to that of the OEM product and no problem at all. The ABS intervention also seems to have decreased compared to the OEM Product.
The performance is more than sufficient for city driving, long touring, and winding driving at a slightly faster pace. The initial braking is moderate, so we recommend this pad for beginners.
・Others
It is a very good Pad with no crying when braking subtly and no dragging when not holding Lever.
The brand power of brembo is also an attraction. (Although the OEM product is also made by brembo.)
The price is about half of the OEM product, the cost performance is excellent, and the performance is perfect.
It's been a while since I've come across a Brake Pads that I like, and I would highly recommend using it to anyone who is unfamiliar with OEMPad's Fee Rings.
Ask a reliable motorcycle shop that is certified to perform maintenance around the brake. If you replace the brake lever by yourself, please do so with the utmost care. Do not test-ride immediately after replacement, and be sure to re-grip the brake lever several times until the brake feel is restored. Do not try out the new brake lever immediately after replacement, but rather, re-grip the brake lever several times until the brake feel is restored!
View detail
Fits: Others , Others , YAMAHA XJR400RII, YAMAHA XJR400R, YAMAHA XJR1300, YAMAHA XJR1200R, YAMAHA XJR1200, SUZUKI INAZUMA400, SUZUKI INAZUMA1200, HONDA CB400SF Ver S, DUCATI STREETFIGHTER848, DUCATI ST4S, DUCATI ST4S, DUCATI ST4, DUCATI ST3S, DUCATI ST3, DUCATI ST2, DUCATI SS900S, DUCATI SS900, DUCATI SS800
Genuine Brembo Brake Pads for Brembo 4 pot caliper.
I had a customer in who had upgraded their calipers to some nice Brembo ones but then they needed some new pads. As they did not know what pad code they needed it was pretty easy to find the right ones for the caliper they had. Standard 4 pots. After I knew the part numbers, finding them on Webike was super simple. Just type in the code and away you go. The price was really good from Webike and combined with some other parts in my order, I had them all shipped together to save on shipping separately. I got all my order in 100% perfect condtion in 5 days from shipping. The pads already come in the Brembo packets wqhich do actually protect the pads from damage and debris gettin inside which could contaminate the pad material. Really good pads, you can see the sinter material by just looking at them. There was no debris of excess pad materieal inside the packet which is always a good sign. Once you get them a few 100 miles in, the pads just get better and better. Brilliant purchase. View detail
Fits: YAMAHA YZF-R7, YAMAHA YZF-R6 S, YAMAHA YZF-R6, YAMAHA YZF-R1 SP, YAMAHA YZF-R1, YAMAHA XJR 1300, YAMAHA XJR 1300, YAMAHA XJR 1200, YAMAHA MT-07, YAMAHA MT-09, YAMAHA FZS 1000, YAMAHA FJR 1300, YAMAHA BT 1100, YAMAHA FJR 1300, SUZUKI Hayabusa, SUZUKI GSX-R 750, SUZUKI GSX-R 600, SUZUKI GSX-R 1000 R, SUZUKI GSX-R 1000, SUZUKI GSX-R 1000
Pure high performance with no extra features
Of the many brembo Master Cylinders, this was the first to be marketed as a RadialPump.
Strictly speaking, the Cut-out's used for Works machine "RACING" At the time, it cost about 80,000 yen, so only a few wealthy people could afford it, and this is a low-priced version for the general public with a non-cut-out surface finish.
It originally designed for WorksRacer The car is a racing exclusive part, so there is no consideration for the installation of a stop lamp switch, which is required for driving on public roads.
(When it was first released, it was prohibited to drive on public roads.)
It's a good time because now they come with a hydraulic stop lamp switch for public road use.
Nevertheless, hydraulic switches use a portion of the hydraulic pressure to activate the switch, which defeats the purpose of RadialPumping, which is to improve lever touch.
I would not want to use it if possible.
Mechanical Switches are available from various companies, but these are also a bit iffy, as they force you to attach very complicated and delicate objects.
I have modified Lever to operate MechanicalSwitch in a completely different way because it is very intrusive, especially if I frequently maintain the Lever area.
Such Hardship to use public roads." Apart from the "RaceParts", the original RaceParts were very serious RaceParts, so the effect is very effective! The lever touch improves unbelievably.
To give you an idea of the degree of improvement, if the previous operation was a 10-step control from release to lock, it would be 10 times more detailed, with 100 steps of control.
Whereas operations that I thought were full Brake were actually only available up to 9 due to the change to 9→10, with this product I can confidently grip up to 9.9, like 9→9.1→9.2→9.3 ... and so on.
As a result, Brake works better even though changing the Master Cylinder should not make Brake work better.
How to mount the reserver tank, the brake hose routing is different and needs to be redesigned, the banjo bolt pitch is 1.0 (and the brembo requires a shorter bolt than usual because the screw hole is shallow), the stop lamp switch needs to be modified, etc. (In addition, brembo requires a shorter bolt than usual because the screw hole is shallow), the stop lamp switch has to be modified somehow, and some ingenuity and modification is required to avoid contact with the cowl and meter.
A more powerful successor is also on the market, but it is loaded with extra equipment and heavier than ever.
If your goal is purely to improve lever touch, this is the lightest weight one.
I wonder if the Body rigidity is higher, or why I feel the Touch is better than the high-end version of CNCCut-outMODEL....
View detail
Fits: SUZUKI Bandit 600S, SUZUKI Bandit 600, SUZUKI SV650, SUZUKI SV650S, SUZUKI SV650, SUZUKI GSX750F, SUZUKI GSX750F, SUZUKI RGV250γ, SUZUKI SV400S, SUZUKI SV400, SUZUKI RF400RV, SUZUKI RF400R, SUZUKI GSX400Type S, SUZUKI GSX400, SUZUKI GSX400, SUZUKI INAZUMA400, SUZUKI GSXR400R, SUZUKI GSX400S KATANA, SUZUKI BANDIT400LIMITEDV, SUZUKI BANDIT400LIMITED
brembodisc
The OEM parts were out of print and there were no other brand products, but brembo was able to help me out because they existed. View detail
Smooth Touch and secure!
[How is it used?
I purchased this product when I replaced the Brake Caliper on my CB1100 with brembo.
How was your experience with it?
The brake pads are easy to control, have impeccable braking power, and are well balanced.
How did it compare to other products?
With the NORMAL Nisshin caliper and pad, I had a scary experience with too much gusto on full breaking on the spur of the moment, but that has not happened at all since I switched to this one.
However, the price is high for Neck.
[Points to note]
The NORMAL disc and a part of the pad are not aligned, so it is necessary to sharpen the disc first before installing the chamfering, etc.
The brembo is MAJOR in Brakes custom, but it is expensive because it is difficult to see the effect unless the MASTER and brake hose are replaced as a total package.
View detail
Fits: YAMAHA X-MAX125 IRON MAX, YAMAHA X-MAX125, YAMAHA X-MAX125, YAMAHA X-MAX250 SPORT, YAMAHA X-MAX250 SPORT, YAMAHA X-MAX250 IRON MAX, YAMAHA X-MAX250, YAMAHA X-MAX250, YAMAHA MAJESTY400, YAMAHA MAJESTY400, YAMAHA TMAX500 BLACK MAX, YAMAHA TMAX500, YAMAHA TMAX530 Lux Max, YAMAHA TMAX530 IRON MAX, YAMAHA TMAX 530 BRONZE MAX, YAMAHA TMAX530
Used with T-MAX 530 Maybe not for the super sensitive?
I purchased this product because the one I had been using was worn out.
Clearance of semiFloating is more than SUNSTAR.
There is a slight noise from the disc when going over the bumps on the Large threshold at low speeds.
No strange noises are heard during normal operation. (I don't know if the mileage will increase)
Other than the sound, I am satisfied with normal use.
View detail
Safe brembo
In order to renew the NINJA400's Braking system, we decided to use brembo's P4-40RB CNC caliper.
The reason why I chose this product was not only because of the manufacturer's reliability, but also because the pad was too large, so I had to cut 2mm off.
Caliper support is Active1470074B.:It may be because I removed 1mm, but I set Shim to Quantity.:It was necessary to offset Caliper outward by 0.5mm due to 1pc.
Since the maximum allowable Rotor thickness of Caliper is 5.5mm compared to 5~5.5mm, the Center was severe enough to make it difficult to insert the Pad just by shifting the Center by 0.5mm.
The Pad is Endless's EMP018SUPERHybridSintered. Actually, I chose Caliper because I wanted to use this pad. The initial braking is gentle, but the more I hold it, the more effective the brake becomes.
I replaced the Bolt with a Paddock ChromolyM8×40mm because of the way the Bolt looked.
View detail
Stable brembo
NINJA400's Brake masterCylinder was replaced with brembo's Radial14RCS.
There is some information that the Radial master does not attach to Kawasaki cars because the OEM switch box interferes with the Throttle Wire, but it does attach. However, you can temporarily remove the switch when installing the MasterCylinder, and then put it back after installing the Master. There is not much room to spare, though.
Brake caliper is brembo 30/34mm 4PODSingle disc. 15mm or 16mm is recommended for 30/34mm Single disc, but I like φ14mm. The total ratio of 18mm is 81.59, which is a little soft for me, but it depends on each person. By the way, GALE SPEED 14mm is 81.59-91.79 for 16-18mm, which is too soft. And by the way, the TotalRatio of 16mm of Φ16 is 70.27, so it is only a little difference from 73.43 of 20mm of Φ14.
I have no complaints about the grip. It is indeed a stable brembo.
Bleeder Screw is ZETA's Material:Replaced with Titanium ZT15-4100.
View detail
Fits: YAMAHA TZR125, YAMAHA TZR250, YAMAHA TZ250, YAMAHA TDR250, YAMAHA SRX400, YAMAHA SRX600, YAMAHA FZS600FAZER, YAMAHA SZR660, YAMAHA FZR750, YAMAHA FZR1000, YAMAHA FZR1000, YAMAHA FZR1000, YAMAHA XJR1200R, YAMAHA XJR1200
Fully OEM compatible, as a safeguard for Circuit
I usually use an old Casting IronRACINGdisc converted to semiFloating for public roads, but I bought this disc to preserve the precious disc for circuit driving.
The shape will be completely compatible with OEMdisc.
All sizes are Exactly, which is common in foreign products. I'll shave some off." And Somewhat tight on the intuition." No such thing as a
If you can't attach it well, it is OK to assume that the problem is on the Wheel side, not on this product.
The 900SS (900SL) has a slightly different inner design of the brake disc depending on the year, but basically it is a gold-colored anodized material.:This is an aluminum plate with a round hole punched out by PRESS and offset by PRESS.
This Serie-ORO is completely different in that area, with BlackAnodized Finishing on the Inner Disk.
It may not be popular with DUCATI users who tend to prefer flashy gold color, but I like it better than OEM gold because it gives a very chic image.
Moreover, Serie-OROSeries has a Sharp Edge because the Inner Disk is made by CNCCut-out.
People don't know that the Inner of OEMdisc is Gold color. 'Poof, it looks like an OEMdisc, but for some reason it looks upscale...' The atmosphere is mysterious.
The OEM compatibility is not only in the installation and appearance, but also in the structure of the Floating itself.
The floater is crimped from the back and is fixed with a strong wave washer, so the disc does not move in a pushing-pushing motion like a full floating disc like the racing discs made by brembo. The disc does not move in a pushing motion like RACINGdiscs made by brembo that use full floating.
It is unfortunate that there is no sound characteristic of Full floating on push/pull, but thanks to this, Pin wear is drastically reduced.
As a result, they are as durable as OEMdiscs, which cannot be compared to RACINGdiscs, and will not be replaced after 10,000km on public roads.
(Full floating RACINGdisc rattles after about 3000km on public roads)
It is inexpensive even though it is made by brembo, and there are no complaints as a replacement for the reduced OEMdiscs!
It's not flashy, but if you don't like the "brembo" look, this is the best choice for you! If you don't like the flashy "I replaced it with brembo" look, this will be the best choice for you.
The old brembo RACINGdisc (Casting Iron full floating) still has the best fee ring if it is in the best condition, but the best condition Casting Iron RACINGdisc However, the best condition Casting IronRACINGdisc is not existed in the first place, unless you have kept a new one.
Even if you use it in Large, the Pin section will almost certainly be worn out, and it will no longer perform as it should.
Compared to such Casting Irondisc, this Serie-ORO, which does not specifically claim to be for Race, has a much better Fee-Ring.
The inner disc is cut-out and the sliding surfaces are made of the same material as the stainless steel RACINGdisc. The only functional difference between the RACINGdisc and the brembo is that it is a full floater or a semi-floating crimp type. If you don't want to look good with a fancy brembo-like appearance, the Serie-ORO is the one for you!
View detail
Fits: YAMAHA WR250X, YAMAHA DragStar Classic, YAMAHA DragStar, YAMAHA YZF600 THUNDER CAT, YAMAHA XJ600N, YAMAHA TDM900 A, YAMAHA TDM900, YAMAHA YZF1000 THUNDER ACE, YAMAHA FZS1000 FAZER, YAMAHA DragStar1100 Classic, YAMAHA DragStar1100, YAMAHA BT1100BT1100 BULLDOG, YAMAHA V-MAX, YAMAHA XJR1300, YAMAHA FJR1300, YAMAHA XV1700Roadster warier, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1
Fully OEM compatible and cool!
It will be fully OEMdisc and compatible.
The TDM900 is OEM and the Inner Disk is BlackPainting, but the Serie-OROdisc also has a Black Inner Color, so a quick glance is NORMAL itself.
I also like the fact that it doesn't look like a DISC exchange.
However, the OEM is punched out of an aluminum plate by PRESS, so the edge of the punched hole is rough, while the Serie-OROSeries is CNCCut-out (probably), so the edge is sharp.
therefore 'Poof, it looks like an OEMdisc, but for some reason it looks upscale...' The atmosphere is mysterious.
The OEM compatibility is not only in the installation and appearance, but also in the structure of the Floating itself.
The floater is crimped from the back and is fixed with a strong wave washer, so the disc does not move in a pushing-pushing motion like a full floating disc like the racing discs made by brembo. The disc does not move in a pushing motion like RACINGdiscs made by brembo that use full floating.
It is unfortunate that there is no sound characteristic of full floating on push/pull, but this drastically reduces the wear on the pins.
As a result, they are as durable as OEMdiscs, which cannot be compared to RACINGdiscs, and will not be replaced after 10,000km on public roads.
(Full floating RACINGdisc rattles after about 3000km on public roads)
It is inexpensive even though it is made by brembo, and there are no complaints as a replacement for the reduced OEMdiscs!
It is not as flashy as a certain domestic disc, but if you don't like the flashy "I replaced it" look, this should be the best choice for you! If you don't like the flashy "I replaced it with a new one!
View detail
Good!
I like that I don't see many people wearing it on SR. Design is cool, and the Pad has a good bite! View detail
Fits: DUCATI 750SS, Others , Others , DUCATI M900, DUCATI M750, DUCATI M400, DUCATI 916STRADA, DUCATI 900SS, DUCATI 748, APRILIA RS250
Ultra-high performance for any time and place
There are numerous types of brembo Brake Pads and they are very complicated.
There are three types of metal pads for road use (public roads) with different characteristics:LA, SA, and SP, and there is also an OrganicPad CC.
The RC we purchased this time is for Race, a type that increases braking force (coefficient of friction) as it gets hotter, and is designed to be used mainly on the front.
Conversely, the coefficient of friction at low temperatures is neglected, and the Pad is not designed for public road use.
The fee ring is an organic semi-metal compounded with carbon, but it is just like a racing pad of a long time ago.
Need to know the characteristics to use it on public roads (always) Loosen. The "Brake" is required to be conscious of the "Brake" (the "Brake" is required to be conscious of the "Brake"), so when used on public roads, it is not good enough to say "Hadrill".
It works great when warmed up, but tends to work too much and too abruptly at street level.
brembo has a Pad called Z04 as a serious for race, but it is even more temperature dependent and cannot withstand very much public road use.
Especially in winter, it can be cold, and it tends to grip→not work at all→grip more→and when the temperature starts to rise, it works rapidly→and falls over, or in fact it does.
The same basic principle applies to RCCompound. Even if you drive on a mountain pass like Circuit, the Range that you can produce with no Brown in a mountain pass is not comparable to the super high load of Circuit, and you will never reach the area where you can show your Pad's ability. You will always suffer from poor feeling no matter how fast you are on a mountain pass.
It is no wonder that they are difficult to use on public roads, as they become much less effective when slightly cooled down.
It works great when it warms up, though.
Overall, this is a for RacePad… for a course that is relatively slow and does not require much brake performance, rather than a course that requires ultra-hard braking.
For example, Course1000 in Tsukuba is the most suitable, and in Course2000 (the main course), a time of less than 1 minute is probably not enough (I can't run in such a time, so I imagine it), but a time of around 7 seconds is very good.
Therefore, no matter how much confidence you have in your ability to drive like Circuit on mountain passes, you will regret purchasing this product for the road, as it is not as good as Circuit's Level. (SACompound is definitely better for public roads, although its braking power when warmed up is slightly inferior.)
View detail
Fits: Others , Others , DUCATI M900, DUCATI M750, DUCATI M400, DUCATI 916STRADA, DUCATI 900SS, DUCATI 750SS, DUCATI 748, APRILIA RS250
Very controllable, soft and effective.
Used with large old brembo RACINGdisc (made of Casting Iron) for city driving.
This is the third time I have purchased this product. The first Pad I purchased is about 10000km and the durability is normal because of the decrease in replacement timing.
It has a Semi Metal-like appearance, but it seems to be of Organic type, and the Touch is very soft.
It is not a gutsy Type, so people who are used to such Pad may get the impression that it does not work.
The softness of the Touch is even more so when combined with Casting Irondisc, and the Large old Casting Irondisc + Fellow Pad. That feeling." Socked to the
The effect rises Linearly to the Lever input, so it should be very easy to use for those who can hold it tightly.
However, when used at ultra-high speeds such as Circuit, it seems to be a little insufficient, and when used at hard braking above a certain Level, the linear sensation fades away, and the Image does not work as well as it was gripped.
However, since it does not work in vain, I can grip it with all my might, and if you are an amateur like me, you can improve your Time........
In city driving (including mountain passes), it does not reach the Level of Circuit's Hard brakeng, so it remains Controllable to the end and is very easy to use in both the Grip and Release directions.
It is also very stable from low to high temperatures, and the feel does not change much whether it is the first shot in midwinter or a hard brake in mid-summer.
It has no temperature dependence like Metal pad, but it is always soft Touch, not hard Touch and lumpy feeling like Metal pad.
Organic and common in the Organic system. The rain changes the effect drastically. The control is as good as in Dry, which is also great.
It is not a type that works with a bang as soon as you grip it, and there is no firmness, so you may have different tastes, but it is very easy to use.
Unfortunately, I purchased two Quantities:Quantity out of 1 Set of 4pcs.:The fact that the paint on the back plate was in a terrible state at 1 pc.
Well, paint can be scraped and prepared with File.
It doesn't matter if the back plate is a little rough or not, because the Caliper piston will melt into the back plate if you break it as hard as you can.
This time, we did not want the touch to be bad at the beginning and to be hard to clean, so we made the Rucksack flat. It is better to start from the beginning with a flat surface, because it is usually a defective Level.
View detail
Purchased as a spare!
Nothing in particular, but Compact is good. View detail
It looks like OEM.
Satisfied with the brembo installed on the sr400, which I saw is brembo but understated. View detail
Brembo 45cc Oil Tank
I have always played around with my reservoirs and this was another option to try. From a well respected brand and very well made part. The 90 degree angle makes fitting the brake lines easy and hassle free. Easy to mount with a butterfly bracket. Very sturdy tank which comes with a bolt down cap and removeable diaphragm. By the way, you can still see the fluid level even though this is a moke colour. View detail
Brembo 15cc Oil Tank
This is a genuine Brembo Oil tank for the rear brake fluid. Can also be used for the clutch reservoir too if that's what you have. Purchased as a spare as I will be changing. This was the best option for what I needed. Very good price and worth the money in my opinion. It has a screw on lid and a removeable daiphragm. Very strong tank. It fixes with the current bolt hole and looks good. View detail