Reviews
Fits: HONDA glom, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB 50 (AA04)
Kitaco Flywheel Puller
Have used this Kitaco flywheel puller a few times now to remove the rotor on the Honda Grom and Monkey 125cc motorcycles with great success. This tool is very easy to use and does a great job of releasing the rotor so we can access engine internals for repair or upgrades. Another must have tool for working on these motorcycles and I am looking at what other tools Kitaco offers for me to add to my collection. The price and quality of the tool is great. The only negative is the price of shipping these days with EMS not being available to Australia. Would like to thanks Kitaco for their quality products and Webike for making them available to me. View detail
I pulled the wire.
When I installed the product on the Air Valve, I grabbed the handle and pulled it, the wire came off from the Air Valve installation part and it became useless.
It broke after the first use, so it was a waste of money.
View detail
Fits: HONDA glom, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB 50 (AA04)
Kitaco Flywheel Puller Monkey 125
When planning to upgrade the stock 125cc motor to the Special Parts Takegawa 143cc N-20 BBK I discovered I required a few special tools to be able to accomplish the job and Webike can supply you with everything you need, it is a one stop shop for all your Monkey 125 needs which I love. The tool itself is great quality and works as expected with a price that is affordable for everyone. View detail
Tire Replacement Offerings
[How is it used?
I compete in Enduro races as a hobby.
I change tires frequently, choosing tires to match the course and trying out new tires when they come out.
The Point that is quite irritating in that case is Timing through the Valve part of the Tube.
This product is a great solution to that frustration.
Thread it through the Valve hole beforehand and attach it to the Screw hole in the Valve core. All you have to do is pull it.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It has been overwhelmingly easy.
How was your experience with it?
Best. The back of my hands were always getting raggedy, but it's easy not to have to force my hands into it.
[Included Parts:were they on?
Included Parts:Or rather, the tip is a bug-turner, which is convenient.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I think it would be easier to thread through the hole if it was more tapered.
View detail
OEM tools, after all
I used to use a cheap cross-type universal puller from CHINA
I couldn't get the Flywheel out of the Universal Puller, so I had to try it out I bought the OEM tool and it came off easily
It is easy to apply force because it can be held in the mouth by a large tool
I wasted a lot of time worrying about not being able to take it
View detail
Wire got out of possession.
For exchange of Air valve, I thought that it was quicker to use the exclusive one, I tried using. The engagement with Valve and others worked well. After that, I thought that work was completed by raising Valve in the Valve hole in Wheel, and the Wire connected with Valve got out of the hole of the Gold genus that embedded the wire. The part that connects Valve and Wire is Large durable but the connection with Gold genus that pulls in the bottom is sweet, it pulled out with full power, the force can not fit in. In addition, I wanted you to raise the strength of this part and make a product that will not come out, I was dissatisfied with the overall evaluation. View detail
So much benefit …
When performing the Tire exchange of the SUPER CUB, I thought of making the efficiency of the work, and the Tube Buy the Air Valve Puller to pull Air Valve
I actually used it, and while it was certainly easy to get the Air Valve through the holes in the Rim It was not that easy or fast, so it was a bit of a letdown
The separate attachment to Air Valve allows the wires to be rotated together when screwing in No construction But the Wire wasn't flexible enough, and once I used it, I got a breakage mark on it
View detail
I can not use it as it is
While removing the Oil seal of Susu Arm, I was working with Slotted screwdriver, but since some Seal did not come off, only Rubber part of Rip was torn, so I purchased it because I needed a special tool.
However, as you use it, the tip is a snake, so Seal will not catch it (Seal and Bearing were in close contact with each other) I could not remove Seal.
So using the sander to grind the tip of the tool made it easier to remove Seal.
If there is a gap in the back of Seal, I think that it can be used as it is, but in my case, processing of the tip was necessary.
View detail
It was really useful..
I tried to exchange the XR 250 's Tire and purchased it. The work of setting Valve of Tube became much easier to do and I was able to shorten the working time of Large width.
I am useful!
View detail
Fits: HONDA glom, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB 50 (AA04)
It's a specialized tool
This is a special tool that is absolutely necessary for the extraction of the Flywheel
I tightened it up worryingly, and at the last moment, with a Drumstick sound The Flywheel came off
There's still a dedicated tool, Merit, which is a dedicated tool
View detail
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON TOURINGFamily
I used it for disassembling Shovel 4 speed Clutch!
I used it to disassemble Shovel's Clutch hub. My Motorcycle is a wet type Clutch,
I bought this tool which can be used even when I changed to dry clutch someday. Very easy to use
, WC is a wet type, DC is a dry type hole, and both can be used. However, the included Bolt was too long to use, eventually I used the OEMBolt that was attached to the Clutch in Motorcycle,
It is unknown what is included for what purpose. Described in the unkind Instruction Manual which tends to be in United States
There was no... But the price is expensive.
View detail
It is convenient to have
Even if it is not necessary, it will be anything else but it is convenient.
Especially when you become a Puncture repair in the mountain instead of Garage, promptly
I'm putting it in an in-car tool as I want to do it.
It's not that heavy either.
However, I think that the price is too expensive as it is a self-made tool if I want to do it.
View detail
Convenient
Off Because car ownership is large, Tire exchange is done well.
Air valve did not come out easily, pushing Tube from the gap of Tire - - - Although it took quite a while it was easy to work by using Kore.
If the Air valve deviates considerably from Valve hole of Rim, Valve does not work well with this product, but if it is a little Gap, you can easily work by pulling Puller and turning Tire a little..
Although you can work without it, it will be solved from irritation if there is
View detail
I used it once and it was broken
I used it once and it was broken.
When exchanging the Tire of Off-road motorcycle, if I pull lightly to pass Air valve to Wheel with this product thinking that it is convenient, the wire has come off from the possession.
It may just be that the individual I bought was bad, but I can not recommend it to others for this quality.
View detail
YAMAHAYamahaY's Gear YAMAHA OEM Magnet Puller
YAMAHAYamahaY's Gear is YAMAHA OEM Magnet Puller. TZr250 (1KT) I used it to remove the Magnet rotor. Screwed in the magnet rotor and turned, it was easy to disengage with a buzzing sound. This is a good one. I think that it was good to purchase.
View detail
Piston Pin lightly escapes!
Used to remove Piston Pin of RZ 250 R. Pin was punched and it was not easy to get out, so purchase this product. After setting Puller, just by turning it in Wrench, Sulur and Piston Pin are missing. Although the difficulty can be used for each Size, on the other hand, I think that it is better for you to have Rubber sheet because Puller's surface will not be Fit and Piston will be scratched.
It was good that I could buy it because I got out of it without difficulty.
View detail
It was nice to buy it!
I bought it for the first time when exchanging Tire because it was introduced in Homepage I was referring to, but when I started exchanging Tire, I forgot about this tool with Large strange feeling. Especially it is Large strange to pass Valve through Wheel ... Large strange ... Tire When you think that the exchange is over, it's a rude Tube crack
In addition, I remembered the existence of ValvePuller when replacing a crying Tube to do that Large strange work! This is convenient! The trouble is totally different! There is no doubt that those who are beginners of Tire exchanges have no loss you know!
View detail
Eliminate irritation at Tire exchange
Purchased at the accumulated Point. I thought that I wanted to see a friend using it. When I actually used it I could replace the Tire quite efficiently.
This is useful because it may take quite a while to find the beginning of TubeValve when exchanging Tire. As the frequency of use is low I think there is one in the tool box and there is no loss.
View detail
Usability Exclassing
I have participated in Enduro for about 10 races a year, but I tried to buy it because of frequent Tire exchange.
Use feeling Outclassing It is a tool box.
I've been getting better recently and I've been less frequent
View detail
Fits: HONDA glom, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB 50 (AA04)
cheap
I purchased to remove Flywheel.
The price was also cheap and could be used satisfactorily without problems.
Performance and saying, accuracy There are no comparison objects because there is no object to compare, but
I do not inconvenience at all.
View detail