Reviews
![[Repair Parts] Wiring Set](https://global.webike-cdn.net/photo/article/20/1468215393020L.jpg)
CB600F HORNET PC41
Purchase Wire Set to use GIVI B 47 with LED attached to BW 'S 125 also on HORNET.
I also wrote it in my diary, but it installed quite a bit hard..
With this, you can relieve the back of Large type car such as Torrack.
View detail
![Optional Lamp Kit (LED Type) [E126]](https://global.webike-cdn.net/photo/article/11/1467469303511L.jpg)
To B 47
I installed it in BWS 125.
Supplied translation (Please input here Manual and English Version Worked while watching the manual.
English is based on photos.
Remove the part of Helmet in under Seat of BWS and let Cable pass through the mounting hole of the Grab Bar and interrupt the Wiring of Stop-lamp. (EarthBlack - Brake is GreenYellow, Blue is Tail lamp)
Lamp does not turn even if I hold Brake after installation!
It seems that the contact at the lid of B 47 did not go well. Adjust it and confirm the lighting. It is safe..
I will do the work of CB 600F at a later date.
View detail
It rusts.
I bought it because I got rusted about GIX's Box.
I fixed it in a place hard to see, so I was not careful.
This time I painted it and used it.
I wish it was a little more rusty.
View detail
To GIVI E430 VISION,
GIVIGIVI : Retrofit Lamp kit (LED Type) I installed the S350 E350 Option. The lower BOX is common, easy to attach. The upper part becomes your own work. It was nice to be brighter than I thought. From the beginning, if you buy a BOX with settings, it's easy.
View detail
![[Repair Parts] Silver Moulding 4PC [Z734Set]](https://global.webike-cdn.net/photo/article/26/1456042377726L.jpg)
We appreciate Bae's response
It is now due to scratches on Silver lacing braid in the GIVI Box at Fall down of Motorcycle, so I decided to purchase it.
I only wanted the injured part but I sold it only in Set I ordered it.
When it arrives, four Silver lacing braids are in one bag and I do not know whether the scratches are being packed from the scratch in transit but 3 are already scratched by interference or the part of the letters is missing was.
We consulted Wei Big and got 4 scores without scratches and a beautiful thing that each packaging was delivered reached.
It was nice to have consulted without cheating as it was not cheap price.
Box is three years, but the difference in color with the newly bought Silver lacing braid is not seen and I am satisfied.
I think that it is better to prepare the Phillips Screwdriver of the Small eyes because it does not enter the groove of the Box in the ordinary Driver.
View detail
![Optional Lamp Kit (LED Type) [E126]](https://global.webike-cdn.net/photo/article/91/1454735055691L.jpg)
bright
It took about an hour for amateurs to install themselves.
It's pretty bright.. I think that it is better to install it for safety.
There are two contacts, but I feel that TopShell and BottomShell do not have to be contact type.
Although it is not a problem at the moment, it seems that there are many poor connections, so I am concerned.
View detail
![[Repair Parts] Rubber Stopper](https://img.webike-cdn.net/catalogue/daypic140709/90177_1_l_TS.jpg)
I lost it.
Not before 1 pc. It was gone.. There are many people who are running without attaching Case, but before 1 pc. It was gone..
Apparently, the state where the Rubber hardens out and falls off soon.
If it is a slightly soft material it will reduce the noise of the gossot and also the height a little low?
I cut off a commercially available anti-slip Cushion round and attached it to Stopper.
View detail
![[Repair Parts] Screw Set](https://img.webike-cdn.net/catalogue/12366/65884_1_l_TS.jpg)
I am thankful that there are many Repair Parts
Mounting Bracket of Box I bought in second hand was rusted, so I replaced it for this item. Both come rusty but new items are pleasant.
However, it is difficult to install - - -
In order not to bend Base, Spacer is compulsory, so that those who are installing without using this product can also see.
It is better to overlay the 6 mm thick Washer into a Spacer or to add scratches and rubbing to gold items with Gap prevention.
View detail
safety first.
When the top box is attached, the rear car (Especially Large type car) Driver's visibility is dangerous because it is dangerous so I mounted the LED Lamp of V47, I can feel relieved if this is better visibility in the day than I thought. Parenthesis is good to light up in two places. View detail
Stop lamp installation
Wiring - Drilling - Installation and work were easy and smooth, but a delicate position adjustment was necessary at the interface between Base and Top case.
I think that the LED is bright and the visibility from the following car is improved.
If you want a greedy, you should turn on both the tail light and the Brake light.
View detail
GIVI SquareWasher
【WebikeMonitor】
GSX1300R HAYABUSA 's RearCarrier, Firmly to install it, I purchased this GIVI Washer because it is necessary.
View detail
Not than - - -
Because the back does not hit the Hinge part directly
It's better than nothing - - -
SKYWAVE with OEM Carrier K-22 (50L) In the state attached to the back, the touch feeling on the back is not very good
I feel stiff.
It is regrettable that the way the skin is tightened is disappointing and the Stitch wears tangled.
View detail
Necessities
Loss due to wear and Prank etc. When setting Case in the state of Base, Case scraping and abnormal wear of electrode contact etc etc. Because the problem immediately occurs, necessities.
Raise durability a little more, or lower the price.
View detail
Fits: Others E370, Others E108
It was good with LED Specification.
Light bulb Spec. I used it for a long time but I bought it because it was out of bulbs.
I referred to other people's impressions, I ordered with damages, but luckily I received the LED Specification and improved visibility during the daytime.
Light bulb Spec. I replaced it with kappa K 46.
View detail
Fits: Others E370, Others E108
LED bright enough.
It was item description with Light Bulb Type, but the thing that arrived was LED. The installation itself is not that difficult, but there is no installation explanation of Rubber packing or GRUHelmet
I was curious to be a little unkind..
It is necessary to drill in one place, but it is hard to work with Drill, so I just bought a good Gold stick with Burner
I melted and drilled a hole.
Although it has LED, it has polarity, the color of the code is
Red - Black and White - Black and Red - By Blue and parts
I want you to unify the differences.
View detail
![Optional Lamp Kit (LED Type) [E126]](https://global.webike-cdn.net/photo/article/34/1428861843334L.jpg)
Breakdown of contact
Within less than one month after purchase, one contact of BottomShellCompact installed in Case will not return and Stop lamp will not come on.
Since there is a guarantee, DAYTONA sent a new contact, now it is working normally.
Installation of the rear attachment lamp kit is not difficult.
Case needs 4 holes drilling.
It would be a good idea to have an electric Drill.
Because the resin is so soft in the place to drill, I think that Cutter will manage somehow.
Since there are reports that the stop lamp does not turn on due to contact wear, I would like to keep an eye on it in the future.
View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA YZF-R25, YAMAHA TRACER900, YAMAHA TRACER GT, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT-10, YAMAHA XMAX
Easy to install. Easy to lock and unlock. I just feel weird to have to purchased the lock separately but it makes sense as there is an optional lock if you want to use the same bike's key as your box's key.
Easy to install. Easy to lock and unlock. I just feel weird to have to purchased the lock separately but it makes sense as there is an optional lock if you want to use the same bike's key as your box's key. View detail
It is a High-mount stoplight. Since it hung on the Stop lamp from the first when the Top case was attached, uneasiness was felt and purchased to visibility. When attaching, it shone with the Sparkle, visibility also went up, and four upper roun
It is a High-mount stoplight.
Since it hung on the Stop lamp from the first when the
Top case was attached, uneasiness was felt and purchased to visibility.
When attaching, it shone with the Sparkle, visibility also went up, and four upper round heads thought that they were stylish, but the Case side and car-body side of attachment was also serious anyhow.
The
instruction manual was also unclear, and he got four persons to help many things (he is a Tester in wiring), and attached to them at last.
Those it does not have [ those ] confidence in
knowledge (also in case of perseverance) recommend you that I have Schopp given.
View detail
Fits: Others E370, Others E108
The electric lamp Type arrived. I wanted LED Type ...
The electric lamp Type arrived.
I wanted
LED Type ...
View detail
![[Repair Parts] Silver Moulding 4PC [Z734Set]](https://global.webike-cdn.net/photo/article/34/1369220217734L.jpg)
A photograph is two points of a SIDE. There is a remainder order two-point Parts. These two points on which the character is written break or get damaged. Appearance is bad although the function of a box does not have influence. It is better to blow a
A photograph is two points of a SIDE. There is a remainder order two-point Parts. These two points on which the character is written break or get damaged. Appearance is bad although the function of a box does not have influence. It is better to blow a CLEAR, if it newly purchases since the character is only painted. It is better to repair, if it is slight breakage since it is not cheap parts. Exchange is possible in one Plus driver. View detail