Reviews
ManufacturerOEM and car models only..
I bought this product because there was no other manufacturer's product to choose from, which is Rival
It's certainly in the shape of a storage space, but modern motorcycles have a storage The space is three-dimensional and unevenly shaped, and the price is relatively high in SEA BASSOEM So I was expecting to use it for car models only as far as the unevenness is concerned, but it felt like a flat Seat
Material is a soft cloth? Leather? So I guess you can put an object on top of it and crush it, but the part that floats is still floating It's a cheep...
View detail
Optional Lamp Kit
Used it to my GIVI E30TN top box and it fits perfectly. Hoping there would be a 4 pin connector so that i can put signal light on my top box to be very visible. But for now i'm very satisfied i've been looking for this hardware for a long time. thanks webike. View detail
Givi E20N Push Button
Installed it on my Givi E20N top box and it fits perfectly. Now I can lock my top box again thanks to webike. Shipping is fast. View detail
Necessary for scratch prevention
I think it's absolutely necessary for scratch prevention! I'm surprised it didn't come standard in the first place! Other third-rate manufacturers have them on the top and bottom! But the third-rate stuff is so cheap! I think it's good because it's well made! View detail
Fits: HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin Adventure Sports ES, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin, HONDA X-ADV
Is this a lock? Can't understand
The lock cylinder, the lock buckle, and the lock frame cannot be used separately. After you open it and place the order, it is also a service. It adds a lot of trouble. When placing the order on April 1, I did not notice that the delivery time needs to be waited for a month and a half. Be good! One and a half months! Who has so much patience! If I saw that I would never place an order at that time, the time reminder on your website is still not eye-catching enough! After the complaint is over, let me talk about this lock cylinder. There is nothing to evaluate. Without this lock cylinder, the trunk cannot be locked. This is a necessary accessory, and the configuration key is really deadly, not professional. The staff is estimated to be enough for a week. You should not order the lock cylinder, lock frame, and lock separately, because these three accessories are indispensable. If you place an order separately, the delivery time will be different, which will cause a lot of trouble invisibly! Again, why do you have to have a comment of more than 300 words? This hurts a rough person like me with no culture, I hope to improve it in the future! Wouldn't it be over if the problem of the product is reflected in a concise and concise manner? well! The lock core, the lock, and the lock frame cannot be used separately. You have opened the order and served it, which adds a lot of trouble. When I placed the order on April 1st, I didn't notice that the delivery time needed to wait for one and a half months. One and a half months! Who has such great patience! If I saw that I would never place an order at the time, the time reminder on your website is not enough! After the complaints are finished, I will talk about this lock cylinder. There is nothing to evaluate. Without this lock core, you can't lock the rear tail box. This is a must-have accessory, and the configuration key can be a real life, not a professional. The staff is estimated to be able to play for a week. Lock core, lock frame, lock, these three kinds of you should not be placed separately, because these three accessories are indispensable, if the order is separated, the arrival time is not the same, invisible will create a lot of trouble! Still, in the end, do you want m ore than 300 comments? This makes me a cultureless and crude person is very hurt, I hope to improve it later! Is it not clear that the problem of the product is reflected in a concise and concise manner? Ugh! translated by Google Translator View detail
Fits: Others M5:M5M:MM:M2:M35:Wing rack
Repair Parts sales are appreciated!
Before I knew it, the SRVFitting Mono-lock baseBolt cap was gone I found a Repair item on sale in the old days Then I'm giving up and looking for a diversion
However, the parts I wanted were only 4 out of 16, so Cost The performance isn't very good, but I was grateful for the cheap price and just sold it It is
View detail
Although it took a bit of trouble to install, it is safe to attach
Mono-lock case (E350) I incorporated it into FLOWSeries. For installation, Drill of 8 mm diameter and Hexagonal Wrenchetc of Small Type. And it took quite a while to drill a hole in the bottom of Case. I think that it is difficult to successfully install it unless you have some technical skill. However, if it can be mounted safely, it will contribute safely as High Mount Stop Lamp. I think that it is better if the brightness of the LED is higher at a slightly lower price. Also, the Power Cord for the lower side of Case was too short for my case.
(The degree of recommendation is "Yes" if it is conditional -. )
View detail
Bright
Even in the daytime, it is clear.
Always my friend who runs behind the scenes, who is not afraid
It is not as bright as it is.
It is higher than the cheap top case Body.
View detail
Cospa is the best!
Purchased for GIVI B 47.
Size is too crowded and showed attached state to a friend, "What? Are not you dedicated?" And it is surprising Just fit.
I am satisfied with Large as a result.
View detail
Function is satisfactory, making is not good
There is only OEM Product, LED Pitch is in Reflector hole Pitch of installation place and it looks properly.
However, Wiring to the lid contacts is a parting pattun unless Wiring far from the contact side is well wired due to the Length of the Limit, or Wiring of the contacts can not take into consideration the capture of four Wiring intake ports Because it is hard to pass through, extend and do Quantity : 2 pc capture.
This time Kawasaki OEMTop case (OEM of V47) Although it is used for OEMMonokey base, Case side can be used as it is, but base side does not consider contact setting, so it is necessary to direct wiring without boring processing or using contacts.
Well Kawasaki does not have a premise, so it can not be helped.
View detail
very good
Although I was uneasy to install, I was able to attach firmly well, but I used it for a while, but I am satisfied with no floating. View detail
It is preparatory purchase.
When I was carrying M1100, I dared to purchase V47 and follow cars (especially Large type Trucketc. ) To make the Stop lamp easy to see.
As expected, in the third year, poor contact points will come up.
One is that the Case Body and the upper lid skimmer become Large and the Switch is not pushed in.
(This is handled by disconnecting the switch and connecting it directly with Wiring)
The second is that the Switch that brings the Base side and the Case side into contact has been shaved.
(It is not possible to directly connect trace because it is often removed)
Since Switch seems to be useless first than LED Lamp, than to panic before Touring
In terms of purchasing while there is a budget.
View detail
Only the Center part lights up
Attaching the Top case will hang the Stop lamp, and from the type of vehicle with the driver's seat high, such as the following Truck
Because visibility got worse, I installed here. The entire Red part of Lid does not get shiny,
Only four round parts of Center light up as Stop lamp.
Translation of daytona (Please enter here, because version Instruction Manual is also attached, it is easy to understand, but drilling work is Drilletc. It is impossible unless you have a tool of
think. Especially Base has thickness of resin. Also, the LED was not as bright as I thought.
It's not that I can not see it, but .... If you are confident in Wiring and Case processing, with cheap Waterproof LED Tape etc.
I think that those who made themselves can be done much cheaper, but regarding the attachment and detachment of Case, it is necessary to worry about Wiring's connection
It is very convenient that there is no.
View detail
Box luxury feeling rises
Purchase SH-45 to feel unity with Motorcycle. BOX Body 10 K yen against Cover 4 K yen is only for appearance Whether individual value sense (Liking) It feels expensive though it depends. Purchasing lost GIVI E470 without painting 20K yen White 26K yen It is actually cheap for Cover cost 6K and 4K Shad is actually cheap, but Body is too cheap than that.
Body In the concave shape of the groove to fit this Cover on the outside of the ceiling, it felt like Design to complete with Cover.
Cover wants to paint exterior on a hard PVC white base, I feel it is pretty and beautiful.
(White color is slightly expensive so it may be different in other colors? I do not understand well)
There is something that seems like a pedestal inside the Body inside the installation (4 photos) , Drill with a drill of Φ 3 and stop with the attached Tapping screw. In the installation Instruction Manual, I instructed to cover Cover and hit Drill as it is, but since I do not want to get a hole in Cover, I opened a hole first with BOXSingle Body and worked, but there was no particular problem.
Instruction Manual is translated only in Europe 6 countries (Please do not enter here, but I think that is not particularly troubling.
* English Version is not E and GB - - It is not even UK - - Maybe I first saw the explanation of the Greece language - -
View detail
Fits: Others , Others , Others , Others
Parts to fix Base
Do not buy Base just got lost!
We will fix Base using this Kit.
If only Base is broken this Parts is unnecessary,
I thought that it would be unnecessary to sell it if it would be sold by Set if possible.
View detail
Fits: Others E370, Others E108
I think that it will become a safety measure
I think that it is not difficult if installing as far as the Instruction Manual according to the instructions, if you can do Maintenance eggplant of Motorcycle.
However, please translate (Please enter here) Since the picture of Instruction Manual of the version is blurred, it may be a little troublesome to compare with the foreign language Instruction Manual.
When putting Box on Motorcycle, it will be quite high, so I think that it will work well with a small amount of light.
There was Light Bulb Type in the description of the item, but it was Red Shining LED.
View detail
Fits: Others E370, Others E108
I wonder if it's going to be a backward appeal a bit.
Product description was written as Light Bulb Type, but the item that came at hand was an LED.
I was able to install without making a mistake irreparable while losing somewhat.
Translation (Please enter it here Instruction Manual may be a bit kind of unkind, but I think that you can install it if you can do daily maintenance of Motorcycle or a little Custom.
View detail
Hard to install.
I do not remove it once attached, but the installation was Large strange anyway.
Particularly troublesome is where LED Wiring is attached to the terminal on the lid side.
It was frustrating Game.
The action is fulfilling enough function.
I was concerned not being instructed to interlock with Stop lamp in the translation (Please enter here, Instruction Manual.
You should not turn on the High mount all the time, do you?
I wonder if I should write it properly.
Also, this is also the translation (please enter here Instruction Manual but I have not written about the color of Wiring.
The original also has colors written.
I think that is important, but why do not you write?
I want you to lower the price a bit further.
View detail
Fits: その他 general purpose
Required parts to detach the BOX with One-touch
I bought it to attach Stop lamp to E37 of GIVI this time.
It is expensive to purchase with Kit, but inside BOX is Wiring on your own so GIVI with individual Repair Parts settings is good.
View detail
How to install?
Translation to installation Instruction Manual (Please do not enter here,
I can understand somehow with illustrations.
However
Instruction Manual If you fix from the back with the attached Screw,
Screw Penetrating the Panel and I got ruined my ColorPanel.
In the first place fixing a thin ColorPanel with Screw from behind - - - ?
View detail