Reviews
Trusted Mistuba
[How is it used?
Mainly used for touring
Was the one you received as per Image?
Street Image
How was your experience with it?
I chose this MITSUBA product because of its compact body and reliability in case of emergency, but the Camera is the latest. (Equipped with STARVIS) I am a little dissatisfied with the fact that it is not. However, the recorded picture quality is fine.
[Points to note]
Since the Body is Compact, I don't think there will be any trouble mounting it.
How did it compare to other products?
We compared it with DAYTONA's M820WD, but there was no decisive advantage and we chose it because of the manufacturer's preference.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
My first Income purchase
Which Income should I buy?
I talked to a senior Rider about it.
Purchased because DAYTONA was recommended to me as a domestic product.
Currently, it is used only for Solo touring.
Easy to operate,
The Large change is useful because I can listen to voice and music while driving.
View detail
Modern necessities
I think Attachment is necessary in today's smartphone-essential world.
The clamp part is solid, so it seems unlikely to fall off while driving, but I am just a little worried about it digging into the Handlebar and scratching it.
It can be securely fastened to the Body even while still in the Smartphone Case.
There is also a locking mechanism so it won't rattle while driving, and it has an insurance band to prevent it from falling.
However, be careful not to use this band in the wrong position, as it can manipulate the volume button.
Vertical and horizontal rotation is also easy, but it is excellent because it does not turn on its own while driving.
It looks like you can choose with or without vibration control components, but I wondered … if it makes sense to go without.
They say that without vibration-damping components, the anti-shake function of the phone often breaks down! (According to a friend)
I decided to install it in the middle for visibility of the meter, but I think it would be better to install it a little closer to the left.
I will try various trial and error.
View detail
Easy to use
It is a replacement for DAYTONA's Smartphone Holder.
It is easy to install and easy to use.
Vibration absorbing Bumper was installed at the same time.
View detail
too cheap
[How is it used?
I replaced my phone with an iPhone 15 thanks to my phone being submerged in water while I was at work a long time ago. The reason for the submersion was that the edge of the screen was cracked vigorously and water seeped in from there. I put the new iPhone 15 in a case that was not too tough and seemed to protect it reasonably well, and put thick GlassFilm on the screen. As the camera technology of smartphones has been improving over the years, high-end Lens has been attached. Is the Lens bare to protect the screen? I thought so, so I bought this product.
Was the one you received as per Image?
It arrived in a more proper packaging than I expected. I wonder if there is any profit to be made from this price after machining, anodizing, and packaging. I was a little worried. It's a good deal for the buyer.
How was your experience with it?
Double-sided tape is applied, so all you have to do is peel off the backing paper and stick it on.
I knew that there were protective films for lenses in the world, but I didn't put them on because I thought they might affect my photos, like changing the focus distance. But with this product, I don't have to worry about that.
[Included Parts:were they on?
Nothing in particular, only Instruction Manual.
[Was there anything that disappointed you?
None in particular. This QUALITY is too cheap.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I think we have to protect ourselves with these products because smartphones are too expensive these days. It is too late after it breaks and the Damage to Wallet is too Large.
View detail
Effects not known.
I installed it to prevent my phone from malfunctioning.
The installation itself is easy, but so far the effect is unknown.
It would be nice to have three different hardnesses.
View detail
Fits: HONDA VTR250, YAMAHA MT03, HONDA Forza300, HONDA CB500X, HONDA CB500F, HONDA CB150R, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, HONDA HORNET250, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA CROSSCUB110, HONDA APE 50, HONDA XR100MOTARD
CROSSCUB110/Mounted on JA60
CROSSCUB110 (JA60) The product has been installed in the
However, the supplied boltc. is M8 size, so it cannot be installed as it is.
The handlebar mounting bolt on the CROSS CUB is M6 size, so it will fit.
Bolt×2 pieces of M6 - Collar (Spacer) of M6×Quantity:2pc. Set is the minimum requirement. I bought it from Net mail order because it is not sold in Home center around here. I bought the M6 Washer×Quantity:2pc. Set was also used.
☆ Reference
M6 Bolt…M6 x 45mm Bolt With Hexagon Hole/Half-Screw
M6 color (Spacer) …13X6.2X15
M6 Washer is sold at home centers around the area.
It is not impossible to substitute the M6 collar (Spacer) with the M8 collar that comes with the product, but I bought the M6 one because it might be wobbly.
Quantity of the four Bolts at the Center of the Handlebar Mounting section in the front.:Remove and install the 2pc.
As shown in the photo, JA60 has almost no clearance between the Multi Bar and the Meter, so parts to be attached to the center of the Multi Bar may not be suitable or require some ingenuity.
View detail
My first Income
Purchased to listen to the Navigation guide.
Simple operation with few buttons is good.
The sound quality is sufficient as I only listen to the directions.
When it comes to listening to music, I thought it was not good.
It takes about an hour to complete charging, which is helpful.
View detail
No functional problems, but ….
No functional problems, but the paint started cracking and peeling about a year after installation. There is a problem with the quality of the paint or the painting method. View detail
(degree of) satisfaction
Used in Circuit.
It is good to see the Best lap updates in Lamp.
View detail
Good to use with Windshield.
[How is it used?
SUPER CUB110 has a Handlebar covered by a Cover, so a Smartphone Holderretc. cannot be attached as it is, so it is used to make a place for the Handlebar.
(I guess you could put it on Mirror if you don't use Windshield)
Was the one you received as per Image?
The color and texture are as per Image. I thought it was quite heavy, but it is better than chubby.
Was the installation difficult?
Before installation, it was necessary to remove the body of the WindshieldCUB-F3, which was already attached to the Motorcycle. Also, the four screws originally attached to the Motorcycle were tightened so tightly that it was a little difficult to remove them. I bought my Motorcycle only four months ago, so it might be better.
When I first installed it, there was almost no gap between the lower part of the Windshield and the Shield (see the first photo), and I was worried that if I drove with the Shield in place, there would be contact between the two on bumps and noise would be heard. After changing the position of the Bolt and Bracket of the Shield, I was able to open a gap where there is no contact and there is no noise.
How was your experience with it?
The KaEdia KDR-M28 Smartphone Holder is attached. The thickness of the bar is 22.2mm, and the clamp of KaEdia is 22.0mm (when Attachment is attached), but I was able to attach it.
I used it for about a week and went touring twice during that time, about 2 hours each way, and had no problems with it coming loose.
[Included Parts:were they on?
You need to prepare your own tool to tighten the Hexagon Bolt. I used the one that came with the for Motorcycle portable tool.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Nothing in particular, since I wrote most of it above. If I had to say something, I would say that the price is too high for a Mount Bar Bracket, but I don't want the quality to be lowered, so maybe this is okay.
View detail
This is my first Income.
I was looking for something that could be connected to other companies and have good sound quality when I occasionally play mass twos since my basis is solo.
I bought it on the day it went on sale with a bang, and I think it performs quite well for the price.
Connecting to other companies is a hassle, but I'm always with a certain person, so I just register and leave it at that.
The sound quality is great, not only because of the speaker performance, but also because the other party can hear the Wind Cutting sound on the Income call, but not nearly as much as a normal conversation on the phone, Microphone performance is also good.
The Speaker cover is not sold only for the Speaker cover, and the Sponge cover has been cut off and is bare and painful.
View detail
Fits: HONDA CBR600RR, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-R1000
Cheap and convenient.
I used it on my GSX1300R HAYABUSA
I think it is essential for Smartphone Holder installation.
Cosmetically, it's great.
View detail
Fits: DUCATI GT1000, DUCATI Sport1000, KAWASAKI H2, KAWASAKI H2R, KAWASAKI ZX-10R, KAWASAKI ZX-6R, SUZUKI GSXR1000, YAMAHA YZF-R1, SUZUKI GSXR1000
Just fit
I installed it on the front fork protrusion (12mm) of Ducati 900SS. 17mm ball, so I matched it with KaEdia's AluminumHold modified KDR-M6S-1, and it was perfect. View detail
Neither good nor bad
The Rain Cover does not have much to say about it, but I think it accomplishes its purpose of protecting the user from the rain.
It can't be helped, but it feels difficult to operate Touch when it is attached.
It is too hard to keep it on everyday, so it is for rain only, but when it rains while driving, I have to stop the Motorcycle and put it on.
I wish it had a waterproof cover for daily use.
View detail
OEM Parts.
The battery was bulging due to age-related deterioration.
Refurbished to new replacementBattery.
It can be used without any problem.
View detail
Simple and beautiful.
Simple and beautiful.
The finish is good and it blends in like OEM.
It is easy to install and remove the phone, yet there is no gapping or falling off. I think it is a well-made product.
I have been using it for Navigation with iPhoneSE2 for about 3 years. No particular negative effects on the phone.
I have heard that some models with a high-performance Camera may break due to SR vibration, so I haven't tried that one yet.
The price is not cheap, so the cost performance is not so bad.
View detail
Fits: HONDA CRF250L, HONDA 400X, HONDA GB350, HONDA GB350S, HONDA CB400F, HONDA NC700S, HONDA NC700X, HONDA NC750S, HONDA NC750S, HONDA NC750X, HONDA NC750X, HONDA NC750X, YAMAHA XSR155, YAMAHA XSR700, YAMAHA SR400, YAMAHA SR400, SUZUKI Gixxer 250, SUZUKI V-STROM250, SUZUKI V-STROM250
suitable for gixxer 250
About quality and texture : handlebar material is solid About the feeling of use : solidly supports my handphone and action camera Products to buy together : you will need accessory mounts for your phone or action cameras Difficulty of installation : easy. just remove old bolts and install bolts provided Cost performance and comparison with other products : higher price but worth the good quality About shipping and packaging : fast shipment and good packaging Any concerns, cautions, or advice when purchasing : this works only on gixxer 250 View detail
Good multi bar!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too View detail
The installation is Large strange
When I put it on a Full Cowl Motorcycle, I had to remove most of the covers, which was quite Large and strange.
It took 2 days to install the body and position the Camera (including breaks).
BackMonitor was surprisingly usable...I don't think you can overstate the functionality of the BSD!
The Instruction Manual is too unfriendly. It seems to be telling you to learn by touch.
I hesitate to buy Option because it is over 100,000
I guess I was too quick to buy when I thought I could have gotten something comparable for less if I had waited a little longer...
View detail