Reviews
Get the power!
I used it to get the ACC power supply for my drrorecorder.
It's so convenient to take Plus just by replacing Fuse with Ideas product!
I'm sure a lot of DIYers love it.
View detail
Stable voltage.
The Power Out-put Cord is an easy to use power supply for power amps with subwoofers and is long enough to reach from the battery in the Engine room to the power amp in the Trunk room. View detail
Note the difference in standards
Bought this to get a power supply for my etc installation.
It is possible to use it especially without a problem. However, it is a difficulty that Fuse BOX does not close because the line comes out from the upper part of Fuse.
View detail
very useful
I bought this for KAWASAKI NINJA1000SX, 2020 model. Because it is connected to navigation, mobile phone charging, and driving recorder, it is necessary to connect the power supply from the car. I bought 2 of them this time. This E577 also needs E576. The connection is simple and you can use it when you plug it in. Never worry about not having enough power in the car anymore. ---------------------------------------------- This is in order to buy KAWASAKI NINJA1000SX, 2020 models use. Because navigation phase, cell phone charger, tachograph, so that the power from the vehicle access. This bought a total of two, but also this E577 E576, simple connection, plug able to use. No longer worry about the car enough power. Powered by Google Translator View detail
very good
I bought this for KAWASAKI NINJA1000SX, 2020 model. Because it is connected to navigation, mobile phone charging, and driving recorder, it is necessary to connect the power supply from the car. I bought 2 of them this time. This E576 also has E577. The connection is simple and you can use it when you plug it in. Never worry about not having enough power in the car anymore. ---------------------------------------------- This is in order to buy KAWASAKI NINJA1000SX, 2020 models use. Because navigation phase, cell phone charger, tachograph, so that the power from the vehicle access. This bought a total of two, as well as this E576 E577, simple connection, plug able to use. No longer worry about the car enough power. Powered by Google Translator View detail
watchman
[How is it used?
I used this service when I installed ETC in my Motorcycle.
BatteryI thought about getting a power supply directly from the battery, but after thinking it over, I realized it was not an option.
Finally, I used this Fuse to interrupt the power supply of other Parts.
How was your experience with it?
This is Emon's FuseSeries, which is widely used around the world.
This time I used it to get power supply to ETC. I was able to insert it into the existing Fuse box without feeling uncomfortable.
Also, I was able to actually run it through the power supply without any problems. It's just like its reputation.
There are a lot of supplies that use electricity these days and if I have the opportunity to use them again in the future, I will choose this one.
How did it compare to other products?
The others are not particularly comparable this time.
I've always thought of Fuse as this.
[Points to note]
After all, it's a Fuse, so once it's done its job, it's done its job. Please be careful about installation.
View detail
I've got power.
I bought this to power my Ignition Illumination. It is very easy and reliable to power.
I used it for Light relationship.
View detail
Be careful not to overcharge because of its thinness.
Used to remove power from the ELIMINATOR 250.
Because the tight lid is attached to the Fuse box of Eliminator, it is not possible to take out Cable, so it is processed small by Drill.
It's a thin Cable, but I haven't had any problems with it, even if I'm using a Grip heater, etc. But you need to be careful about the allowable current.
It is very convenient and easy to use for mounting electrical components.
View detail
Power from the Fuse box
There are many ways to use your new Motorcycle with a USB power supply to make your Smartphone Navigation experience more comfortable.
Direct connection of the Battery
Connect to the wiring that runs when the key is turned on (appropriate wiring around the handlebar).
Connect to the Fuse box
Does the Harley's Battery seem to wear out more than a domestic car when it's in storage? I think that Risk is high and give up the bacchanal even with Fuse if possible.
I thought it would be easiest to connect to the appropriate Wiring around the Handlebar, but this was also a no-no because I didn't want to mess with the Cable of the vehicle body.
Then, inevitably, let's get the power out of the Fuse box! That's when I came across this product from our friends at DIYUser, Emon.
First of all, check the Ampere number of the Fuse that takes power, and confirm the conformity of Emon. The installation is completed only by removing and inserting the Fuse.
The Ampere number for this product is
・7.5
・10
・15
・20
・30
I had a 15A in my Harley (XL1200S).
Harley has a Fuse box at the bottom of the Seat, so you can remove the Tank etc. and run the Wiring neatly to the Handlebar and it's done. After that, use the USBQuantity made by DAYTONA which I have purchased separately.:Combine with the power supply of the Set and it's done.
I have to get this stuff on.
・Tie Band
・Pliers
It's easier to do a lot of things if you have
It is still a short time after using it, but the Fuse is attached, and the power supply is excellent in cost performance without a problem because it is properly removed.
In contrast to the latest motorcycles, when a motorcycle is already in the old-school range, taking a new power supply is likely to put a lot of stress on the Battery and Wiring. In order to avoid unnecessary troubles, it is important to avoid modifying the original wiring as much as possible.
It has become commonplace for motorcycles to be equipped with smart phone navigation and draco systems, and it has become a customization to figure out how to get power to the bike. I'm going to try Challenge with a different mechanism.
View detail
Used to power the ETC
important item
[Was there anything that disappointed you?
nothing special
Do you have any wishes or improvements you would like to make for the Manufacturer?
nothing special
[Do you have any products to compare it to?
nothing special
Frequently Asked Items
What made you decide to buy?
I used it to install the ETC on my High ace, I didn't know that the Fuse comes in multiple sizes and almost bought a size that didn't fit. "Low Profile. is compatible.
How was your experience with it?
I'm happy with the power supply without any modification.
Was the installation difficult?
Just remove the existing Fuse and replace it.
【Please tell me the installation point and hang】
When you remove it, you can use radio pliers or special tool.
[Was the Instruction Manual easy to understand?
There is none
[Included Parts:were they on?
There is none
[Others]
There is none
View detail
Do you want to take costumers or do you want the easy and reliable one?
This is a great way to secure the power supply for your electrical parts
This is a kit that takes power from the low-profile Fuse, which is common on modern motorcycles and cars.
Good point? Power supply is secured by only replacing it with Fuse
Just replace the Fuse with the Fuse that comes with the OEM Fuse box and voila! You can get a Plus power supply in no time Of course, because the function of the Fuse is built into the body, the protection of the circuit that was originally The function is still alive
In addition, a tube fuse is attached to the Plus side of the power supply, so it is possible to use it for the electrical components that were installed afterwards The protection on the Parts side is perfect Excellent
Good point? It has a bullet terminal
There is a plug receptacle on the wiring side that I took out It's already on
If you're a careless person, you'll often see Female on the Plus side and Male on the Minus side Rule called "W", don't you get it wrong?
If you have this from the beginning, the order of Wiring, TAB, receptacle, and so on There's no mistaking Zettai for Thailand I'm glad you're a big girl (me too)
What's not so great about it:... a bit expensive!
Wiring to Fuse, about 500 yen.
It's up to You whether you take this price as high or low
When I was young Oh, man! I will not buy Thailand. What was I thinking, but now that I'm a little older Money buys ease and certainty! I grew up with the lonely thought process of "I don't want to be a part of this," so now I'm hoarding these Parts and keeping them in my toolbox.
View detail
It's easy to get a power supply.
This is very useful.
Just plug it into the Fuse box to get power.
It also comes with a separate Fuse, so if you want to take Attachment power, this is the one I recommend.
View detail
To get the power out
Purchased to remove the USB power supply
All you have to do is replace the Fuse, so it's easy to revert to the original
However, depending on the shape of the shoe box, the lids may be too tight to close, and the cord may be overloaded Please note that this will take some time
View detail
This is a great way to secure the power supply for your electrical parts
I can't live without it anymore!
This is a great way to secure the power supply for your electrical parts
Good point? Power supply is secured by only replacing it with Fuse
Just replace the Fuse with the Fuse that comes with the OEM Fuse box and voila! You can get a Plus power supply in no time Of course, because the function of the Fuse is built into the body, the protection of the circuit that was originally The function is still alive
In addition, a tube fuse is attached to the Plus side of the power supply, so it is possible to use it for the electrical components that were installed afterwards The protection on the Parts side is perfect Excellent
Good point? It has a bullet terminal
There is a plug receptacle on the wiring side that I took out It's already on
If you're a careless person, you'll often see Female on the Plus side and Male on the Minus side Rule called "W", don't you get it wrong?
If you have this from the beginning, the order of Wiring, TAB, receptacle, and so on There's no mistaking Zettai for Thailand I'm glad you're a big girl (me too)
What's not so great about it:... a bit expensive!
Wiring to Fuse. 436 yen
It's up to You whether you take this price as high or low
When I was young "Ouch! I will not buy Thailand What was I thinking, but now that I'm a little older Money buys ease and certainty! I've grown up with the lonely thought process of "I'm going to have to buy these Parts and put them in my toolbox now I'm keeping it in mind that W
View detail
I use it all the time, not just for motorcycles
Quality is solid; used for Wiring connections on SEA BASS Motorcycles
You can buy it as a Stock if you order it with other things at We-BigSale for a discount Maybe
View detail
It's convenient
I used it for the first time to power the Grip heater
I don't want to do a bacchanal I could have branched out from Harness on the vehicle, but if I take it from Fuse, I can take Harness from It can be powered off without damage
I wanted to get it from the ACC power supply, so Horn (10A) Fuse of
Make sure it's energized with IgnitionOn and the work is done It's easy
It also comes with a 5A GlassTube Fuse for peace of mind
According to Emon, this power extraction Fuse is different from the standard Fuse that is pulled out They have an orientation (It wasn't mentioned in the Product Package.)
The correct way to do this is to attach the cord or the side with the cord attached to the side with the power coming from the vehicle
I don't know why I'm an electric onchi
It is very convenient, but if you can get the code that comes out of the Fuse to come out horizontally if you can I wish I could have installed it without interfering with the Fuse lid
For those who don't want to chop up OEM Harness, it's Recommendation
View detail
Mini Flat Type Fuse Power
Basically it's easy to install because it just plugs in.
In case of HORNET's Fuse box, you can install but the lid did not stop.
It forced me to close but it made me feel uneasy.
I was able to easily replace the glass tube of Fuse by just opening it.
View detail
It is convenient Items
Used to extract ACC power from Fuse box when installing USB power supply. There was such a useful thing and it was saved.. It is simple because it only connects by connecting the Bullet Terminal terminal to the connecting side. View detail
Even beginners in electrical equipment can do it easily!
In order to install the USB power supply, I purchased the USB power supply and Mini Flat Type Fuse Power with the Bullet Terminal terminal and secured the power from the Fuse box. It is the best product that can be easily taken for those who are beginners of electrical equipment. View detail
Usb Power supply installation
I bought it to install usb power supply this time.
It's very easy to install, just replace it with Fuse from Motorcycle.
I think that it is easy to use and a good product though it was myself that I had never touched electrical components etc..
View detail