Reviews
For Grip heater
I bought this for my Grip heater and it is easy to install as long as you can remove the front cowl. I am satisfied with it. View detail
Separate handle car may be hard
I bought it to install on my Ninja ZX-25R, but there was no suitable space around the handlebar, so I gave up the idea of installing it.
I tried to attach it temporarily to the Multi Bar Holder, but the Unit is too big to be attached to the Handlebar.
Parenthesis bad, so I gave up completely.
However, it was a waste, so I installed it on my Ninja 250R.
The Ninja250R already had a USB power supply from another company installed, but we decided to replace it with this product.
The Ninja 250R handlebar has plenty of space to accommodate this product, so we were able to install it without any problems.
I installed it on the Left Side of the Handlebar, not sure if it will fit on the Right Side as I haven't tried it.
The installation went without problems because the ACC power supply was already branched.
No... there was one problem:the Male Bullet Terminal was already crimped, but the Bullet Terminal did not meet the standard.
I had to replace it with a Bullet Type Terminal that I have. It seems that the Smallest Bullet Terminal is used halfway.
View detail
Pimping on CL250
Many Universal USB power supplies are fastened with a plastic bracket or tie band, and I did not like the feeling of being retrofitted.
This product is large and a little bit obtrusive, but it does not bother me too much because it feels integrated with the Bolt On.
The wiring is the smallest and the bracket is made of gold and there is no vibration, etc. I am satisfied. I am satisfied with it.
Only Minus more expensive than Universal
View detail
Fits: Others
Exactly for Z900RS with a little modification
Without modification, the Mirror Holder will not fit snugly on the Mirror Holder due to interference with the Clutch.
It will be less than 2 cm away from the Mirror Holder.
If the parts on the headlight side are slightly modified as shown below, they can be attached exactly as shown in the photo.
(1) Shave off a little less than 2mm from the handlebar using a cutter file.
(2) Extend the hole where the Cable comes out downward by about 1 pc of Cable and shift the Cable downward.
I worked with Cutter, but you could melt it with a Solder iron or other heat.
The Mirror Holder looks like an OEM product when it's perfectly attached to the Mirror Holder, and it's very nice and discreet.
View detail
Fits: Others
This time, a bite of Type
We have purchased many similar USB wiring products from other manufacturers, but we chose DAYTONA this time as well. The instruction manual is easy to understand. The power supply is taken from the wire of the brake switch. The power supply is taken from the electric wire of the Brake switch.:It is also good to set the wires, but if you make a mistake, it will take a lot of time and effort to fix it. If you are a first-time user, you can use an Inspection Tester, which is sold for about 500 yen, to check the wire that is energized when the key is turned on.
The corner CUB CUSTOM has just the right amount of free space on the Left Side inside the Handlebar Cover, I put the Wiring and converter there. At first, I attached the USB to the LeftMirror with a bar for the phone and then used Included Parts:to install it. There was no particular problem, but it was noticeable, so I reattached it without using the Included Holder on the underside of the Handlebar Cover. The fixation is made with a small installation Holder made of aluminum plate and attached with a hard Magic tape. I thought it would be easier for those who do not use the attached holder if the area of the bottom of the USB port was a little wider.
It has been about a year since I installed it. I was worried about vibration etc., but I can charge my phone without any problem. I have not had any problems even when I wet it in the car wash. I open the cover when I use it and close it when not in use. I have it upside down, but it doesn't open by itself when not in use.
My CUB does a lot of strolling and choppy riding. I am glad I installed DAYTONA's USB, which is solid even when not in use.
View detail
It is easy to install.
It is a bit large, but it is separated from BrakeWiring, and the terminals are available as OEM, so it can be pimped out.
It is a little bit troublesome to remove the battery cover.
Tape is not included, so just wrap Wiring with Tape and secure with Tie Band.
I think that even someone who knows little about Wiring can put it on.
View detail
Durability Zero
I installed it in a GSX1100S and used it for a few days, then suddenly it became inoperable. I am extremely disappointed. View detail
![[K TOUR] USB Power Kit](https://img.webike-cdn.net/catalogue/images/116399/80-757-13000_1_TS.jpg)
Earth Issue
The product is very good, but the Wiring is correct by all means, but it did not energize.
I contacted KITACO directly and they told me that there was a case that it could be cured by re-installing the earth, so I re-installed the earth around the front cowl and the power went on. So, when you install the car, if the power does not come on even though the wiring is correct, I think it is a good idea to suspect the earth.
View detail
Standard Items indeed!
[How is it used?
I used it on my Yamaha MT-25, which I use on a daily basis.
I chose this product that can charge more than two units because I have Situation to charge my phone and Income at the same time.
Was the one you received as per Image?
Fixed Parts and Extension Cord in addition to Body in Quantity:Set
How was your experience with it?
As for the installation, it can be replaced immediately if only the Accessories power supply can be removed.
In the case of MT-25, you only need to remove the Seat, part of the Side cover, and Meter and Wiring and you are done.
Since the Fuse is located just where it is hidden by the Side cover, we fixed it without any special treatment.
When wiring, only the Plus side is too short, so we made a wiring for extension, and when we work on it, we can use it. "Hey, hey, hey, DAYTONA-san, why is only Plus so short!" I am sorry for doubting you, DAYTONA.
Then, fix the Socket to the Multi Bar and you are done.
It is now possible to charge the battery safely and conveniently and quickly.
[Points to note]
The only thing that bothered me was the waterproof cap, which is removed by pulling it out, but the stopper is too small.
I thought it was a Point in need of improvement, as it will probably crack sooner or later.
How did it compare to other products?
We considered various Chinese USB power supply and Others.
In the end, I was right to choose DaytonaBrand's product, which has two mouths and is a standard item.
【Review】
SUB charging is now possible with easy installation.
It takes up only the smallest amount of space, so there is no clutter around the Stem.
View detail
It is good to be normal.
I had to replace the one I had been using because the plastic part of the USBOutlet cracked.
I expect quality from DAYTONA products.
View detail
This is the USB Cable for the Recommendation!
If the phone is not connected to a power source and the map is displayed, the battery level will decrease as you watch.
I was concerned about the negative reviews of USB power supply products, such as weak output, inability to charge, immediate breakage, short wiring, and ha-gap, so I was hesitant, Discreet, fast-charging JapanBrand This is why we chose this product.
Since the headlight is a Bates type, we put the transformer in a light case and connected it to the wiring inside. We also found a USB cable with a small head and installed it with the Refreshing.
The phone will not be charged during Idling, but as it runs, the phone will charge more and more despite the constant Map display.
It is a mystery, but it seems that the USB charging starts when the power supply from Motorcycle increases. it works fine without any change in the brightness of the Headlight.
Cap is loose. I don't ride in the rain, so I removed the Cap and left the USB Cable connected.
View detail
Simple but stable
Since the area around the handlebar is small, we did not want to add anything too multifunctional and selected this one, which does the minimum necessary job in a simple way.
I think that the strength of this product is the sense of security of DAYTONA and the reasonable price in spite of its solid manufacturing.
Recently, Type C plugs have been introduced, but I think they can still be used for smartphones.
The power supply capacity is also perfect, and it charged my 5-year-old smartphone, whose battery was getting worn out, while simultaneously using the phone for calls and navigation.
I think the design can be used for Almighty regardless of the type of car.
View detail
Compact
Purchased because my previous New Ing USB power supply was disconnected.
Cover of the terminal is Material:I wonder how waterproof it is because it is plastic, but it looks better than Rubber cap.
The power supply is a bit large, so the installation location is a bit of a consideration...
With CROSS CUB, there is room in the body, so mounting is not so much of a problem.
The cord has a Connector, and if you place the Connector on the Battery side, you can connect DAYTONA's corresponding Charger, but it must be connected directly to the Battery.
View detail
Effective
My son has been using it for touring (using his cell phone as a navigation device) for a couple of years now, and it seems to be very durable without any trouble, so I put it on myself.
I modified the Bullet Terminal and connected it to the Wiring that is electrified when the key is turned on. (Because I was afraid that the battery would run up.)
In that case, the transformer was a little too large to fit in the headlight case.
I have also purchased a portable Holder and will use it for my next Touring.
View detail
Even SS is an indispensable item in today's world
When I purchased a 24 year old ZX-6R, I wondered what to do with the USB power supply. I decided to install it on the WorldWalk mount bar and chose this less conspicuous version.
I asked Kawasaki Plaza to install it together with other parts, and they did it beautifully with no discrepancies in the wiring treatment, etc.
The installed condition is almost unnoticeable, and it is recommended for vehicles that do not allow handlebar mounting.
View detail
Like a good luck charm.
I bought this product because I had a battery failure while touring the other day. I put it on to keep an eye on it. I put it on to keep an eye on the battery. I wear it like a good luck charm. View detail
MOTO GPS RADAR 12VPower Supply Cable Installation
I like it because Body is activated by key ON.
I bought it once before for my Body and installed it myself,
The voltage converter was attached to the car body with double-sided tape, but before I knew it, it was ha-gapped.
It looks like it was broken by vibration and the electricity stopped coming.
For a while, it was powered from USB,
I still repurchased and installed it for its waterproof property.
This time, I fixed it properly with Tie Band. 。 What is the result?
Power is taken out from the D-UNIT.
Wiring is necessary to consider the movement of the handlebar (depending on where the body is mounted) and to handle the wiring around the handlebar.
If you want to remove the Cowl with Wiring handling,
To identify the location and type of bolt (write the number on the cowl or put a plastic tape on it).
Bolts that have been removed should be inserted through holes in the corrugated cardboard in numerical order so that they are not lost.
Be careful not to leave Bolt behind for restoration!
View detail
Good product
This is the first time I have purchased from you!
Nice, easy to understand Instruction Manual and good product.
I recommend it!
View detail
Simple but highly waterproof and safe.
[How is it used?
Restore&Custom is finished, I bought this product that I found in the product introduction column of Webike to install the mount bar and USB power supply to make my LITTLE CUB even more convenient and comfortable.
How did you like it?
I had previously purchased a power port compatible with USB+Cigar socket from the same DAYTONA company and used it on my SEROW250, so I had no problems with the connection and installation.
The lid of the power supply outlet is also made to be waterproof and drip-proof, so you can rest assured even if the weather suddenly worsens while driving.
It is so convenient that you can easily take out power from your phone or ActionCamera, making it impossible to get into a vehicle that does not have a power port.
How did it compare to other products?
As mentioned above, the solid BodyCap of the power supply plugs in and has good waterproof functionality, which is helpful because I don't have to worry too much about weather changes or when washing the car.
[Points to note]
As for the cap on the power outlet, if the lid is left open, it will not be waterproof, as it should be, and you should make a habit of closing it tightly when not in use.
If the car is running, there is not much of a problem, but if too much power is used during idling, the batteries may be adversely affected. Displacement VolumeMotorcycle batteries have a particularly small capacity, so we have to be careful when using them.
Other items that would be helpful
The deciding factor in the purchase
DAYTONA has been a good partner for various Parts since I was a teenager, and since I also used DAYTONA for the power supply extraction harness of only Cigar socket that I used before, I have purchased this product from the ease of obtaining the price, sense of security, and Repair Partsetc. I purchased this product because of its price, sense of security, and ease of obtaining Repair Partsetc.
【Included Parts:presence or absence】.
The power supply HarnessBody, fixing parts, Tie Band, Connection Connector for the company's optional Battery Charger, and an illustrated Instruction Manual are included in the package.
For more information Webike's Product Spotlight. 10th and 1Quantity:See the image of the 1st pc.
[ITEMS TO BUY TOGETHER
Some vehicles require troublesome removal of the exterior when installing this product, so it is recommended to use a Trickle Charger or a Grip Heateretc. 'Products that require a power source that we may need later on.' It may be a good idea to purchase and install a
Opinions and requests to Manufacturer.
DAYTONA alone offers an extensive lineup of products for power extraction.
From now on. Good products at affordable prices. Thank you in advance.
View detail
Stable USB power supply.
It is easy to use as I had it on my previous Motorcycle before. Installation is also very easy to understand because of the Instruction Manual. View detail