Reviews
Fits: HONDA glom, KAWASAKI Z125 PRO, HONDA MONKEY125, HONDA ZOOMERX, HONDA ZOOMERX, HONDA ZOOMERX, HONDA glom, HONDA CB400 F (JF52-1000001-), HONDA DAX125, HONDA 400 X , HONDA CB400 R, HONDA CB250 F , HONDA CBR250 R, HONDA CBR125 R, HONDA MSX125 SF, HONDA MSX125, HONDA MONKEY125, HONDA CT125, HONDA CL250
สินค้ามีหลากหลายสีสวยงาม View detail
Fits: HONDA glom, KAWASAKI Z125 PRO, HONDA MONKEY125, HONDA ZOOMERX, HONDA ZOOMERX, HONDA ZOOMERX, HONDA glom, HONDA CB400 F (JF52-1000001-), HONDA DAX125, HONDA 400 X , HONDA CB400 R, HONDA CB250 F , HONDA CBR250 R, HONDA CBR125 R, HONDA MSX125 SF, HONDA MSX125, HONDA MONKEY125, HONDA CT125, HONDA CL250
ได้รับสินค้าเรียบร้อย ติดตั้งเรียบร้อย View detail
I used it to fill in the riddle.
The Camshaft ChainHousing of the Z900RS Cylinder block has a mystery hole that is not used on this Motorcycle.
The diameter of the hole is 11mm. I have been wondering about this for a while, so I use well nuts to fill in this mysterious hole.
I hope they will continue to do so because it is a product line that raises the level of custom culture.
I used a 9.5Φ C550 with a thin neck, and since the parts are just for decoration, I used an appropriate lightweight aluminum M5 bolt and cap.
Other than the mystery hole for the cylinder block, the Center Stand mounting hole on the Left Side can also be filled with this well nut and M5 bolt since the hole diameter is 11mm.
View detail
Fits: HONDA glom, KAWASAKI Z125 PRO, HONDA MONKEY125, HONDA ZOOMERX, HONDA ZOOMERX, HONDA ZOOMERX, HONDA glom, HONDA CB400 F (JF52-1000001-), HONDA DAX125, HONDA 400 X , HONDA CB400 R, HONDA CB250 F , HONDA CBR250 R, HONDA CBR125 R, HONDA MSX125 SF, HONDA MSX125, HONDA MONKEY125, HONDA CT125, HONDA CL250
น๊อตแผงคอtakegawa monkey125 สวยมีให้เลือกหลากหลายสี View detail
Refresh
We replaced it for Refresh to Timing removing Cowl.
There is a feeling of reduced squeaking.
There's nothing wrong with replacing it before it cracks!
The removed items were cured.
View detail
High quality and safe to use!
[How is it used?
Due to the aging of the OEM Cap Nut, we replaced it with a rust-free Stainless steel one as Repair Parts.
Was the one you received as per Image?
The quality is as good as the Image, and you can use it with confidence!
Was the installation difficult?
Anyone can easily install it as it is just a matter of replacing it.
How was your experience with it?
I don't have to worry about Rust so much anymore, and I don't have to worry about being exposed to the wind and rain.
[Included Parts:were they on?
Nothing else is attached as shown in the image.
[Was there anything that disappointed you?
It is a pity that it is a bit expensive.
▼It is not sold as Single Item, but Quantity:1 Set of 2pcs.
I am in the middleQuantity:It is a delicate point because I have purchased 1 Set of 3pcs.
View detail
High quality and safe to use!
[How is it used?
Due to the aging of the OEM Cap Nut, we replaced it with a rust-free Stainless steel one as Repair Parts.
Was the one you received as per Image?
The quality is as good as the Image, and you can use it with confidence!
Was the installation difficult?
Anyone can easily install it as it is just a matter of replacing it.
How was your experience with it?
I don't have to worry about Rust so much anymore, and I don't have to worry about being exposed to the wind and rain.
[Included Parts:were they on?
Nothing else is attached as shown in the image.
[Was there anything that disappointed you?
It is a pity that it is a bit expensive.
▼It is not sold as a Single Item, but it is a halfway quantity.:1 Set of 3pcs. is a subtle point.
View detail
It would be helpful to have these components available.
It was used to Custom XV750E.
When rebuilding a seat rail, welding work is required, but if you start building it piece by piece, you will never finish.
We also work with what is in existing products in each section.
In addition to the SteelTallNut, we also use WELD colors and SteelTab for Welding.
Since Steel is dared to be Lineup instead of Stainless Steel, it is quite useful for people like me who only have MiG welding.
If we had TIG facilities, we would like to make it in Stainless Steel, but we have no choice because we only have MiG.
Although wires for Stainless Steel are also available, we have heard that the blending is questionable, so we have chosen to use Steel for this project.
This product is named TallNut for WELD, but I think it is generally called round boss or Pipe nut.
The wall thickness is just right, so welding with Pipe was easy.
I'm an amateur so if it's too thick it's difficult to differentiate between blending with Pipe……
I purchased M8, but since each size is sold, I would like to purchase M6 when I make Fender mount.
View detail
Thank God they don't sell them at the homestore.
When I installed NAMETALCraft's aluminum chain guard on Over Racing's Swing Arm, the bolt nut on the reverse side was dangerous because it interfered with the chain when I fixed it with the bolt on the front side bracket. I inserted a 12mm Truss Screw from the Reverse side and fixed it with this Cap Nut with Flange from the outside using an AngleDriver. After that, there was no more interference and I am satisfied with the result.
This was helpful because these special Nuts are not sold in Home center.
View detail
Cheaper than OEM
We purchased more because they are cheaper than OEM!
When they are old, they are hardened and I replace them when they are Rose.
This is a necessary component to prevent Cowl from cracking or over-tightening!
View detail
Installed on Exhaust System part
I bought this together with the Exhaust System because it has a baked color in it. It is well made and the color is beautiful. View detail
Less expensive than OEM Parts
[How is it used?
I used it to fix my newly purchased Chinese Cowl.
I bought this product because it was inexpensive and had good reviews.
Was the one you received as per Image?
I purchased For M6, but it is surprisingly Large, so it is somewhat troublesome to extend the lower hole.
Was the installation difficult?
The Chinese Cowl originally has an appropriate hole Size, so the hole needs to be expanded.
The work must be done carefully because it has to be made rather Exactly.
It is recommended because it is easy to use once it is fixed.
How was your experience with it?
It is strong enough to fix Cowl.
As mentioned above, Chinese Cowl would be useful as long as the pre-drilling is done properly. (Actually, I prefer Quick fastener, but...)
Note that the price is surprisingly high when used in large quantities. Still, it is much cheaper than OEM parts.
[Was there anything that disappointed you?
Although the product itself is not so great, the size is indicated as large, but I thought it was difficult to image the size.
I felt it would be easier to buy if compatible OEM Parts numbers were listed.
【Review】
It is useful for fixing exterior parts such as Cowl and Screen.
OEM Parts are expensive, so if you want to keep the price as low as possible, this is a good option.
View detail
Beware of tightening Torque
The texture is perfect. Please note that this product is limited to 40N while pure STD Nut is 50N. 50N Torque value was applied and there were no cracks or chips. View detail
zx10rKITACOWell nut
zx10r2011
It can be used in all areas to some extent and is no different from OEM. I think it is good to buy in bulk because it is inexpensive.
View detail
Half the price of OEM
It had not been replaced for a long time, so it hardened and lost its damper effect, so it was replaced for refresh!
I was quoted to buy OEM, but it cost twice as much as KITACO product, so I decided to buy KITACO product.
I am Large satisfied with this one because it is cosier!
View detail
Good quality
Better quality than Home center, etc.
I would like to see Lock nut in Nylon as well.
View detail
Fits: MV AGUSTA STRADALE 800, MV AGUSTA TURISMO VELOCE 800, DUCATI MONSTER1100/S, DUCATI MONSTER1000, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S2R1000, DUCATI MONSTER 797, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100/S, DUCATI DESMOSEDICI RR, DUCATI SS1000, DUCATI PAUL SMART1000LE, DUCATI Multistrada 620, DUCATI Multistrada 1100/S, DUCATI MONSTER900, DUCATI MONSTER800, DUCATI MONSTER796, DUCATI MONSTER750
Small parts, but they make the legs look tighter.
[How is it used?
Replacement will be made from NORMAL.
Was the one you received as per Image?
The Aluminum Cut-out and Anodized finishes are moderately good.
Was the installation difficult?
The installation is easy, although I had trouble with the need for a 28? socket or Spanner.
How was your experience with it?
The product is only for appearance but improves the texture.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
The price is a little high.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA Super Cub 70, HONDA Super Cub (HA02), HONDA Super Cub (C90 type), HONDA little cub, HONDA Super Cub 50 (C50 type), HONDA Super Cub 50 (AA01), HONDA SuperCUB110pro [SuperCUB110Pro]., HONDA SuperCUB110 [SuperCUB110]., HONDA CUB [Cub]., HONDA little cub, HONDA Super Cub 50 (C50 type), HONDA Super Cub 50 (AA01), HONDA SuperCUB110pro [SuperCUB110Pro]., HONDA SuperCUB110 [SuperCUB110]., HONDA CUB [Cub].
Set of stainless steel bolts and washers
"Purchased for HONDA SUPER CUB 50 CUSTOM.
Part number: W-1741-057.
I bought a set of stainless steel bolts and washers to update the old ones, which are no longer so beautiful. Everything came up normally. This is the largest set of 12 parts and the lowest price. I recommend to everyone - it's cheap to update the look. -------------------------------------------------- -------- Acquired for Honda Super Cub 50 Custom. Article of the details: W-1741-057. I acquired a set of bolts and puck of stainless steel to update the old ones no longer so beautiful. Everything came up regularly. This is the largest set of 12 details and the lowest price. I recommend everyone - cheaply update the appearance. Powered by Google Translator"
View detail
I wanted to make it Black.
The OEM is the same FlangeLock type, but it was corroded, so I bought a Black Stainless Steel one.
Lock type is safe because it is a place where a lot of force is applied.
View detail
Stops firmly.
If they spread out a little, they will stop well.
It is not a place where force is applied, so be careful not to overtighten.
View detail