Reviews
good
I used to install a Blue one, but recently I thought it looked childish, so I decided to use the same Plating color as the Handlebar. I have been installing a Blue handlebar, but recently I thought it looked childish, so I decided to go with the Plating color, which is the same color as the Handlebar. View detail
Fits: KAWASAKI Z125 PRO, HONDA PCX160, HONDA PCX150, HONDA PCX125 Hybrid, HONDA PCX125, HONDA APE 100, HONDA APE 50, HONDA APE 50 TypeD, HONDA APE 100 TypeD, HONDA glom, HONDA MONKEY125, HONDA GB350S, YAMAHA BWS 50, HONDA Universal for Φ22.2 Handle, HONDA PCX125 E:HEV, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA GB350
It's safe.
I think the product is well made, but I think the price is a bit high 。 There are various inexpensive products, but they are useless if you can't install them, so we went with this one. 。 The color is also 3 colors, so it would have been nice to have Blue, Red, etc. View detail
Used with the handlebar of the model, it will match well. love it View detail
Fits: HONDA CB400SF, HONDA CB400SUPER BOLDOR, Others
Attachment installation
I bought it to install attachments for navigation and helmet holders rather than reinforcing the handlebar. The compatibility was also confirmed on this site. View detail
HARDYHandlebar Brace is the BEST!
I chose this product because of its price, but I am satisfied with its high quality. It fits my JigSar just right, and I appreciate the stability of the handlebar, vibration reduction, aesthetics, and quality. I chose the short type, and I am glad I bought and installed the HARDY EZAttachment Handlebar Brace! It is my personal best satisfaction. I highly recommend it to everyone! View detail
Fits: KAWASAKI Z125 Pro, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FAZE Type S, HONDA FAZE, HONDA glom, HONDA PS250, HONDA PCX150, HONDA PCX125
cb125r
I like it very much…
Thank you very much…
View detail
Fits: HONDA GROM, SUZUKI V-STROM250, SUZUKI GSX-S125, SUZUKI V-STROM250, YAMAHA MAJESTYS, SUZUKI GSX-S125, YAMAHA MAJESTYS, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, SUZUKI V-STROM250, HONDA PCX150, SUZUKI GSX-S125, HONDA PCX150, SUZUKI SV650
Can also be installed in Center
Since it is designed not to expand or contract, it is not suitable for all aircraft and the clamp position to the handlebar is limited even if it is placed on MONKEY125. I think that the rigidity of the bar is higher because it does not expand and contract, but the effect will be seen from now on. It is also good that you can put the attachment to any position on the bar. View detail
Fixing essentials trigger
Installed together with POSHSuper Motorcycle Bar. The old one was not a Quick Release Clamp, so it was a bit large, but it is still extremely convenient. I usually use only a waterproof digital watch and a compass in case of stormy weather, but it is really helpful when I have a lot of things I want to attach, such as a smartphone, a radar search, etc. It is essential items in this day and age. View detail
Fits: SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI SV650, YAMAHA MAJESTYS, SUZUKI GSX-S125, SUZUKI GSX-S125, SUZUKI GSX-S125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX, HONDA PCX, HONDA PCX
For smartphone or ActionCam mounting
Purchased for phone and ActionCam mounting.
Off-road feel and GOOD!
View detail
diversion
I have it on my WR250X.
Made by HURRICANE was short, so I went with this one.
Made by HURRICANE Clamp also worked fine.
View detail
It was short
I found this item, new and unused with exterior pain, at a used Parts store and purchased it.
I tried to put it on a WR250X that I replaced with a Taper Handlebar, but it was too short for SSize.
I use only Clamp and use Shaft as POSH.
I did not feel any vibration reduction.
View detail
Fits: KAWASAKI Z125 Pro, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FAZE Type S, HONDA FAZE, HONDA glom, HONDA PS250, HONDA PCX150, HONDA PCX125
It's cool…
It's a product I wanted …
It's the best…
View detail
Fits: KAWASAKI Z125 Pro, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FAZE Type S, HONDA FAZE, HONDA glom, HONDA PS250, HONDA PCX150, HONDA PCX125
SimpleStraight design is good.
[How is it used?
Commuting use.
Was the one you received as per Image?
I couldn't find a design that was short and SimpleStraight, so I came across this one.
Was the installation difficult?
It is easy, although there is some difficulty in adjusting the position delicately.
How was your experience with it?
I am satisfied with the product after about 3 years of use with no fading or Rust.
I think the quality is good.
View detail
Handlebar Brace side thickness needs to be adjusted
I purchased this product at the same time to install the Handlebar Brace. When installing it, there was a gap on the Handlebar Brace side, and it was wobbly even when tightened tightly, so I installed it with two extra washers I had at home. If the gap is filled, there is no wobble, but if you install it normally, there will be a gap of 2 to 3mm, which is not an individual difference. Personally, I think it would be better if the color were a little more subdued. View detail
Good texture
I purchased the zrx1200daeg because the Handlebar area was too tight to fit the Smartphone Holder and USB power supply.
Although a Handlebar Clamp needs to be purchased separately, I am satisfied because the Smartphone Holder and USB power supply are mounted a little higher than the Handlebar.
View detail
As Handlebar MountingPoint.
Installed on '23 CB1300SB SP.
I found the quality of the Single Item to be very good. There was of course no extra rattling or BALI, and an L-shaped hexagonal wrench was included for assembly.
After installation, I did not expect it to be effective as a Brace bar because I am not at a Level where I can tell the difference as a running bar, but I think it is valuable enough as an installation point for Smartphone Holder, power supply, etc. I think it is worthwhile as an attachment point for a Smartphone Holder or power supply, etc. Since it is a product that can be adjusted in length to begin with, its rigidity as a Brace bar is a bit of a puzzle.
Nevertheless, I am satisfied with the firmness after tightening each part, and I think it is universal enough for various types of cars, so I felt it is a good product. On the other hand, I am a little worried about how the clamp part will attack the handlebar.
View detail
Fits: KAWASAKI Z125 Pro, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FAZE Type S, HONDA FAZE, HONDA glom, HONDA PS250, HONDA PCX150, HONDA PCX125
OK
[How is it used?
about a month
Was the one you received as per Image?
Yes
Was the installation difficult?
It's so easy!
How was your experience with it?
I used to use Slim type.
Changed to use Smartphone Holder here.
Easy to install, but parallel, or should I say straight.
How far you are willing to compromise is up to you.
For perfection, the only way is to use a Motorcycle stand and a level.
The price is a little high, but...
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA GROM, SUZUKI V-STROM250, SUZUKI GSX-S125, SUZUKI V-STROM250, YAMAHA MAJESTYS, SUZUKI GSX-S125, YAMAHA MAJESTYS, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, SUZUKI V-STROM250, HONDA PCX150, SUZUKI GSX-S125, HONDA PCX150, SUZUKI SV650
To install Holderetc.
I purchased this to attach a Smartphone Holder and USB power supply. The thickness is uniform, so it can be positioned freely. View detail
Fits: SUZUKI V-STROM250, SUZUKI SV650, SUZUKI SV650, SUZUKI GSX-S125, SUZUKI V-STROM250, SUZUKI V-STROM250, HONDA PCX, HONDA PCX, HONDA GROM, HONDA GROM, HONDA MONKEY125, HONDA MONKEY125, HONDA DAX125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX, HONDA PCX
I put it on for appearance.
I bought it because I wanted to put a Handlebar Cross Bar on my Grom.
I'm not going to put a Smartphone Holder on the bar, but I wanted to try it anyway.
Another reason we purchased the product was that we wanted it to be BlackGold color.
However, when I put it on, Parenthesis was surprisingly good, and my wife loved it.
View detail
Fits: HONDA FORZAX/Z(MF08/10) PS250, SUZUKI SKYWAVEtypeS/M(CJ/CK44A CJ45A/46A), YAMAHA MAXAM_MAJESTYC, Others for Φ7/8-Inches Handlebar
Surprisingly effective.
I happened to use it before on an XG250 TRICKER.
I had put it in storage after replacing the Handlebar on my XG250 TRICKER, but I was concerned about the distortion and restlessness of the OEM Handlebar Up Type on my Z125PRO, which I believe is for the Z.
I wondered if I could reuse these parts, which are essential for off-road vehicles, and installed them.
Installation is also easy, as it is simply fixed horizontally to the point where there is no play.
After installation, the handlebar unexpectedly or surprisingly calmed down considerably and improved maneuverability.
Negative sensation also increases the Direct feeling on the road surface, so if you are nervous, you may be bothered by the vibration, I found it easier to ride with less firmness and unnecessary movement of Steering.
By the way, recently, many people seem to be attaching it for fixing Camera and Smartphone.
View detail