Reviews
As imagined
I was hesitating because I had to make Bracket when using for H2 ...
However, I knew that this item was available, I immediately decided by looking at the price (cheap)
However, I thought how I feel Brown compared to H2 ~ ~ but it was OK as a result.
I added Red Fluid, but I see it looking red and I know the transparency
You can also notice deterioration, it looks better than anything else.
I think that it is a good product that grabbed the needs of customers.
View detail
Since it is an isomorphic item, it is safe because it can be attached without machining.
After all, I want you to make Smoke more effective.
From the Brown family, the attack of DARK type is good.
However, since Parenthesis is better than milk white color, for the time being, goo.
View detail
Since it is an isomorphic item, it is safe because it can be attached without machining.
I tried impulse and tried to change the full to Active Red.
I think that it looks better, but the price feels - - - I feel like it's too good.
If possible, I wanted a little smoke tank that is closer to Black.
View detail
Fits: Others Radial brake master cylinder, Others RCSBrake master cylinder
BremboOEM may be better
Until now I had problems with using Recall Brake master. Overhauled Mr. brembo MASTER Soon after use leakage changed from Hose to Cup to brembo's one. Thereafter no problem. View detail
Large satisfied
I exchanged this SmokeTank from NisshinOEM's milk White color Reserve tank this time
Since the exchange itself is the same shape, it is easy to suck and exchange Fluid up to Limit where it does not bite air
It is Parts which I became more concerned about H2 Body when I saw that it was attached to Kawasaki H2
I waited for Smoke to be released in this shape
Transparent Smoke Tank is Cool without complaint
View detail
After all, Smoke
Easy to install. Mediocal OEM
It seems that it is not included unless it is set to Brake fluidColored.
Also buy Brake fluid, air bleed,
Did you want Smoke to be set from the beginning?
View detail
good
Clutch side could use Bracket as it was with brembo
Brake side had to exchange Bracket either in Kawasaki OEM or brembo
Since this product was released, it was made Smoke by attaching it without having to replace Bracket
View detail
![[NISSIN Repair Parts For Master Cylinder] Assembly Tank](https://global.webike-cdn.net/photo/impression/fc/fc34b0c0d96bc8286b1fca81ec744674L.jpg)
There is no problem in particular.
I used it for Overhaul of semiRadial master cylinder. The only concern is that the plating process of Nut fixing Tank cap was Uniqlo plating. It is easy to rust and is a conspicuous part so I think it's none to say that it is a plating process with weather resistance a bit more. Bolt replaced Stainless bolt of Universal Product View detail
I am satisfied.
Cup attachment of Rear master Bracket's Screw stuck and drilled with Drill and it stopped with Tie Wrap for the time being, but I found this product "This is it!" And purchase.
Although it is compatible with Honda Rear master in the explanation, Yamaha made brembo (For myself for TZr 250 R) It was also usable. However, depending on the position of the Screw Left Side (Left Side straddling, inside the car body) It will be offset at an angle to.
It is not a degree of inclination that the liquid level obliquely decreases in capacity.
In my case, thanks to this, it was convenient that Cup did not hit at the time of the Ankle Grip.
The accuracy of the work was very good, it became Accent which is beautiful and looks good as well as function.
You no longer have to remove Cowl for BrakeMaintenance, and you can easily do a FluidCheck.
Cup mo Hose also got caught up and I was able to refresh it with this.
View detail
This is good!
I use it in combination with R1 Radial master.
OEMCup "I can not purchase without the body number" With that
I made a choice without choosing, but making it is also simple
The Hose outlet was also right underneath, so I was able to install it perfectly.
View detail
Good luck with today !!
When searching with Webike, what is KawasakiOEM is that the Pipe diameter of the installation is different!
Kawasaki OEM is 8 mm and bremboOEM is 7 mm - - -
MASTER is also brembo so bremboOEM is the better choice.
Parenthesis Well finished in a modern day!
View detail
Is beautiful
I use it as Reserver tank of Brake master of accossato.
I used cheap Chinese-made Tank so far, but since Fluid was bleeding or it became cloudy early, I decided to exchange it for something neat.
At first I thought about attaching Kawasaki's OEM Parts Number, but accossato has the same Hose diameter as brembo, so this one is selected.
Make making is fairly solid and it is beautiful. However, the hole for fixation was Large, it was possible to finish with Bolt of M8 at last using Rubber Bush and Spacer which was rolling in the tool box.
Probably because it thinks that the former hole is about 12 mm, ingenuity is necessary for installation.
View detail
Fits: Others Radial brake master cylinder, Others RCSBrake master cylinder
I thought that the thing itself was so good but it was a bad product.
I bought it for RACING correspondence, but it is RCS exclusive item.
In this Bracket, the mounting direction of Tank and Master is arrayed,
Hose forcibly turned out to be overloaded on the MASTER side for a bit.
I never thought that it would be NG regardless of the type of car ...
View detail
Fits: Others Radial brake master cylinder, Others RCSBrake master cylinder
The angle of Bracket is perfect for KATANA
It installed at the same time as RCSMaster cylinder. There was not a separate problem in mounting. I was troubled with bremboOEM Product and other company's products, but the texture of Bracket etc etc etc. I respected and selected this place. The angle of Bracket is perfect for KATANA and it is satisfying if it is a little cheaper.
View detail
Fits: Others Radial brake master cylinder, Others RCSBrake master cylinder
With pictures - - -
I noticed now but it is different from the real thing
Tank and Bracket were different
Did he change Minor?
Fork and Cowl Bracket fall on RVF in this Bracket
View detail
Exchange MASTER on takeover of the previous car
I installed the MASTER that used the previous car.
Purchase has to change Tank.
After all, Brembo caliper MASTER also brembo !!!
It is a good fee Ring. (^^)
View detail
OEMBrake master style
As OEMBrake master, I chose to make Rizza bar Tank integrated type.
Installation is Instruction Manual, but if you have ERing pliers for desorption of for Brake Grease and E Ring to paint on the O-ring, the work proceeds to Smooth.
So far there is no leakage Oil, making made with Billet is really good.
Most of all, it is clear that we do not use Bracket etc for Reserver tank, so we have a clear view of OEMBrake master wind.
View detail
Fits: Others Radial brake master cylinder, Others RCSBrake master cylinder
Master cylinder set
I bought it for bremboRacing radialMASTER. I thought that it was easy to install, but when Tank Bracket's handling was not good, I bent and twisted quite a bit when connecting MASTER and Tank with Hose. View detail
Refreshing around Handlebar!
I purchased it at the same time as brembo RCSRadial master! I do not enter much amount of Oil, but I wanted to refresh around Handlebar and I am very happy. Cap's bremboMark also makes me feel bad when driving, is Nice ^ _ ^ View detail
![[NISSIN Repair Parts For Master Cylinder] Tank Set](https://img.webike-cdn.net/catalogue/daypic140709/36205_1_l_TS.jpg)
Exchange because it broke
Damaged Reserver tank originally attached (The round part of the lower attachment part broke) I exchanged because I did it. It is doubtful about durability because it is a place which is not likely to break normally, how much it changes to new View detail