Reviews
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, YAMAHA XJR1300, YAMAHA XJR1300, KAWASAKI ZRX1200, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG
I use it with CLRTitanium full exhaust and set
I use it as a Silencer of CLRTitanium full exhaust.
Although the picture is not Up, the attached Image becomes the same state as the picture of the item description with the above combination.
Since the total length of Silencer itself is long, the end part reaches near Rear blinker, but there is no influence such as burning Blinker body by waste heat.
Since Material is Aluminum, it has a reasonable weight as opposed to Titanium, but obviously, there is nothing like it will affect running.
I think that the sound quality is slightly different from the dry sound like Titanium, but it sounds a bit different from the Gentle sound of heavy bass. It's a part of taste. If you do not try it...
The volume is huge. In this way, the vehicle inspection does not pass. I'm passing two car inspections with End Baffle & filling in the gap with Glass Wool. Incidentally. The volume at that time was about 96 db.
The product comes with Emblem of K - FACTORY and you can select whether to paste with User 's preference.
View detail
Cheap but normal
BEAMS Beams : Universal Silencer
Material : CarbonSize : Φ 89 X 300 mm TailSpec. : GP table... Sakomi径 : Φ60. 5
I was attaching an exhaust system for CB 1300 of MORIWAKI, but it is thick and likely to interfere with Swingarm (I do not say that) So, I was looking for a thin Exhaust System.
BEAMS is about 30,000, so it was not that expensive so I decided to buy it for the time being.
It is thinner and shorter than MORIWAKI, and it feels fresh as it is BlackBase.
But the sound is a bit noisy. Although it is an Exhaust System with End Baffle from the beginning, even with Baffle, it is just the vehicle inspection and the outward volume.
I had a Baffle and I regret to say that it is a disappointing sound quality, but even if I remove it, I feel the treble remains because the volume is Small (MORIWAKI ratio).
It seems necessary to return to MORIWAKI when going through the inspection.
I think that making it cheaply is solid..
Even though it is said to be performance "?" I feel, is it as it seems?.
View detail
Fits: Others
Almost satisfied
In the same Manufacturer, I chose the longest. The reason for choosing the longest is quiet and reason is that it is not too noisy. Naturally Baffle is used as it is removed, the impression is Punching inner diameter 50 and the total length is 620 so moderate volume (Individual differences) is. I do not like After Fire altogether. By the way Baffle is too quiet and not enough.
(The vehicle inspection is going through, is not it?) The reason why I made it to star 4 is that the Rivet division is somewhat collapsed. It will be useless, though.
View detail
Sound quality - Both good looks
Attached to YOSHIMURA EX tube.
Welding traces are wonderful and beautiful.
I made it simple without Burnt Color, but it feels calm and good.
It became a good Titanium brown if I polish it with Plexus.
It is so powerful that I think that Torque will not fall at low speed, rather it will increase.
How many times did you try to put it in the seventh speed of vision.
I heard a sound that sounds as great as 400 can not think.
Firing Axel gently blows up.
Garrogaro at low rotation and wild at medium speed, after switching to VTEC 4Valve it will grow comfortably with Vern.
Afterfire will do if emblem is effective.
Regarding sound quality, as you expected, Race ish sounds good.
Volume will be careful for your neighbors.
It was perfect if the volume was a bit smaller.
View detail
It was a beautiful Silencer.
I was wearing Earls Gear 's Wyvern, but I am somewhat unsatisfactory so I changed Sirenzer.
I was exchanging Silencer with this until I met something I liked.
It was 1 pc in exchange for various Silencer, but it was not the best thing in myself.
It was an impression that missing was worse than I thought, but I felt like I was caught and not going to Smooth.
So the usage period was short.
I did not like it much, but since it is a Universal Silencer, it may be compatible with Motorcycle.
View detail
Volume adjustment with Steel Scooter
I installed it on the Shorty Exhaust System of NitroHeads I bought in second hand.
Because it was the explosion sound as expected, I bought it at 100 Hz 30 g XQuantity : 1 Set of 4pcs. Stuffed with SteelSponge and silenced.
I am satisfied because I wanted to be a Megaphone Type.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, YAMAHA XJR1300, YAMAHA XJR1300, KAWASAKI ZRX1200, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG
I purchased a K-Factory CLR Aluminium muffler for my Ti K-Factory exhaust and it arrived from Japan to New Zealand in 3 days! (actually pretty much everything I order from Webike arrives in 3 days!). The fit and finish of the muffler is first class, very
I purchased a K-Factory CLR Aluminium muffler for my Ti K-Factory exhaust and it arrived from Japan to New Zealand in 3 days! (actually pretty much everything I order from Webike arrives in 3 days!). The fit and finish of the muffler is first class, very good quality. The sound is a perfect mix between performance and a nice deep sound. I also have a K-Factory CLR Ti GP muffler which I will use for the track only, it offers a little more power but the noise is a little too much for long rides. View detail
Awesome silencer from K-Factory, super light being Ti and can't believe the difference in weight when comparing with the standard system! Webike Japan had super fast service and kept me informed all the way until the parts arrived at my door. Super fast,
Awesome silencer from K-Factory, super light being Ti and can't believe the difference in weight when comparing with the standard system! Webike Japan had super fast service and kept me informed all the way until the parts arrived at my door. Super fast, the system left Japan and took 4 days to arrive at my door in New Zealand, thanks Webike Japan .. I will definitely being ordering mre parts from you! View detail
250TR was attached and used.Since there is a conversion Pipe, Pons attachment can be carried out at a pure Exhaust pipe.Since the Stay is also movable to some extent, it is convenient.Since the Plating is solid, it is quite beautiful.
250TR was attached and used.Since there is a
conversion Pipe, Pons attachment can be carried out at a pure Exhaust pipe.Since the
Stay is also movable to some extent, it is convenient.Since the
Plating is solid, it is quite beautiful.
When it remains as it is, it is quite merely explosive sound roaring.The
Silencer is contained once.
In a direction to explosive-sound-roaring-ize simply and conveniently, it is a Recommendation.
I wound up the Wool.
View detail
The Full exhaust of the company was equipped.Since it thinks that the Round silencer of former was also 100 or more db although it was 105db in Manufacturer value, it is large satisfaction in the touch which became a heavy low instead of explosive
The Full exhaust of the company was equipped.Since it thinks that the Round silencer of
former was also 100 or more db although it was 105db in
Manufacturer value, it is large satisfaction in the touch which became a heavy low instead of explosive sound roaring individually by the grade that sound volume is large, somewhat.It cares about the warmth in early morning or the night too.
View detail
It purchased, though he wanted to try the Silencer of this form and it wavered. Although changed from the Trickster's Shotgun, marks remain for a while in a thing with a shallow plug. sound volume is as imagination. I think that a public road use fai
It purchased, though he wanted to try the Silencer of this form and it wavered.
Although changed from the
Trickster's Shotgun, marks remain for a while in a thing with a shallow plug.
sound volume is as imagination.
I think that a public road use failure is appropriate.
An after fire becomes intense rather than the
Shotgun.
It is [ with
tone quality appropriate for a Trickster ] very to its liking individually.
It is sound like a Racing machine.
(Generally it may be noise) If the Inner baffle is attached, an after fire will decrease.
It is better not to use it in the - night
* early morning.
View detail
[Webike Monitor] Although there was a mat Polish of grenade V-III from or before, it is put on the market by a Heat Polish this time. It fell in love with presence at first sight. attachment has no problem. sound volume has no problem
[Webike Monitor] Although there was a mat Polish of
grenade V-III from
or before, it is put on the market by a Heat Polish this time.
It fell in love with
presence at first sight.
attachment has no problem.
sound volume has no problem at End-buffle wearing.
(Subjectivity) The force of the
exit 90 phi where those without
Baffle are F-1 Sounds (smile) is likely to be inhaled if it sees from !
back truly.
Brand Emblem is in the portion into which the Silencer back side is not conspicuous, and is a true Sense of a sanctuary.
The Quality of the
products is Hideyasu.
I think that it is a Silencer suitable for a price.
View detail
It changed from the Silencer of the Nojima. even when also making is solid and he has no Baffle -- so much -- -- it is not noisy. appearance was also GOOD.
It changed from the Silencer of the Nojima.
even when also making
is solid and he has no Baffle -- so much --
-- it is not noisy.
appearance was also GOOD.
View detail
A Carbon silencer is dramatically smart. making is solid -- a liquid Gas -- even if there is no price, there is no exhaust leakage. sound is also quiet and a Recommendation.
A Carbon silencer is dramatically smart.
making
is solid -- a liquid Gas -- even if there is no price, there is no exhaust leakage.
sound is also quiet and a Recommendation.
View detail
K-factory+ Nitro Silencer. It was not felt as explosive sound roaring, so that it considered, even when he had no Baffle. Or [ that the blunt Titanium color was good and there should just also have been setting out of the Silencer currently ground to th
K-factory+ Nitro Silencer. It was not felt as explosive sound roaring, so that it considered, even when he had no Baffle. Or [ that the blunt Titanium color was good and there should just also have been setting out of the Silencer currently ground to the Polished ]! View detail
[Webike Monitor] Titanium silencer 85x300 mm of GP-LOOK phi was chosen by appearance. bore Although the Straight type of phi 55 was attached before, since it was explosive sound roaring, the Baffle had been attached on the STREET. Bore phi 4
[Webike Monitor]
Titanium silencer 85x300 mm of GP-LOOK phi was chosen by appearance.
bore Although the Straight type of phi 55 was attached before, since it was explosive sound roaring, the Baffle had been attached on the STREET.
Bore phi 45 since the growth of high rotation fell remarkably although it was
Titanium-silencer GP-LOOK was purchased.
Since a simple Design is liking, an Emblem is nothing.
Although the picture of goods was transmitted in the Outlaw Image which was dramatically light and matched the age by compact looks and which felt, and became blackish although it was easy to come out, the actual thing is beautiful and it obtains it. - It is working.
As for
Engine characteristics, the growth of high rotation is a bore. Sound volume is some fall although it fell from phi 55.
In a Tunnel of the
highway, a breast is not cracked by passing acceleration.
View detail
After all, sound is wonderful. Remarkable heavy low. It becomes touch to have ridden on a large scale. I have also raised engine-performance side. If the Silencer is changed, a low speed will become the sacrifice instead of a high spe
After all, sound is wonderful.
Remarkable heavy low.
It becomes touch to have ridden on a large scale.
I have also raised
engine-performance side.
If the
Silencer is changed, a low speed will become the
sacrifice instead of a high speed being extended, but there is completely nothing.
It is the touch to which the Torque was attached conversely.
It is an appropriate Silencer although the
(it does not understand in practice since it is the touch on which he rode.) price is expensive.
View detail
Although it was a muffler of Nojima, since sound was gentle, I exchanged for this silencer. The low speed became too light although it was a satisfactory sound.
Although it was a muffler of Nojima, since sound was gentle, I exchanged for this silencer. The low speed became too light although it was a satisfactory sound. View detail
[Webike Monitor] Although an omission is also good and sound is slightly noisier at the Silencer of die length exactly good for a ZEPHYR1100, it is the sound of the touch with sufficient low-pitched sound which is not to a vulgar sound. it decided with
[Webike Monitor] Although an omission is also good and sound is slightly noisier at the Silencer of die length exactly good for a ZEPHYR1100, it is the sound of the touch with sufficient low-pitched sound which is not to a vulgar sound. it decided with type and construction material -- good to buy it View detail
Plating is also beautiful so so. The design is pleasing, and although it is some in an inner silencer, tone quality/sound volume can be changed.
Plating is also beautiful so so.
The design is pleasing, and although it is some in an inner silencer, tone quality/sound volume can be changed.
View detail