Reviews
scratch-resistant
It is used for removing and attaching parts that you do not want to damage.
Size, it seems to be good in terms of weight and can be tapped without scratching.
It is useful to have different sizes so that you can use them in different ways.
View detail
scratch-resistant
I purchased a plastic hammer to avoid scratches and damage when removing hard assembly parts.
The weight, Large size, and ease of use seem to be good.
View detail
For drilling
Used for positioning when drilling holes.
Easy to type with one hand and convenient with strong and weak adjustments.
The frequency of use is occasional.
The selling price is a bit expensive, but having 1pc. is useful for drilling holes.
View detail
Not manufactured by KOWA in Japan
I was happy to find what I thought was a prybar set manufactured in Japan but I'm sad to report these are not manufactured in Japan by Kowa. It states right on the original packaging Made in Taiwan but the package is slipped into a plastic bag with a Kowa sticker stating Made in Japan. These are most definitely Made in Taiwan. The still function great as pry bars and work fine I just wish they were a genuine Japan manufactured product. View detail
Necessary for diagnosis of ignition system failure
Necessary for measuring instantaneous voltage in ignition system failure diagnosis
I know you have to connect it to the tester, but if you don't use the Type, it might be a bit troublesome.
It seems to be set in SST of each manufacturer, but this is probably cheaper for the same etc. product.
Well, actually, while we're waiting for it to come in, we're going to have to diagnose the problem before we can diagnose it. (Stator breaking) But if you want to know if the ECU is broken, Stator, Direct Ignition, or disconnected, you don't have to worry about it.
View detail
It's a shame
Time is of the hour, kowa tools like Large, but this Twrench 12 is the tip The box outer diameter is a little bit large. Because of this, KTC and koken's Twrench can be used and this Twrench cannot be used. Situation. You can say that durability is important, but there are many situations where you can't use the situation in the first place. It is. I'm sure it was good in the past, but as the years go by, ToolSpace is getting tougher and tougher. It's a shame, because the quality of the thing itself is high. 。 View detail
Tentatively necessary first
Piston ring is indispensable for gaps and valve clearance measurements. Even if you do not have many Size cards, you can basically Cover in combination. If you do not apply Oil first, hard and thin Blade will bend.
Well, it is inexpensive so you can buy it at consumable item Level even if it is torn.
View detail
Is it easy to use?
I used it for Tappet adjustment of CUBEngine. Width was also exactly good, I adjusted for Tappet for the first time but it was able to be used without problems. It also helped to adjust the gap of the ignition plug. Small It is saved because it does not bulk. View detail
Individually a little expensive, I want selling Rose
Shared when doing maintenance and restore dozens of people with multiple people in school days
I bought it as a tool of. I think the price has not changed from the past.
I think it is normal to do with a cotton swab, but if it is a cotton swab, it can not be removed,
Cotton Garbage is easy to get out. When the cotton swab is cleaning the cylinder part of Valve seat
I wonder if I can use it.
Because it is a stick of wood, the angle is not right, so it is slightly strict, scrape it like a Taper
Even so it collapses so so it is not good.
In that respect Seat cleaner is sticking an exquisite line. Hardness and accuracy
Good. Large resistance will not be beautiful with a single shot, but if you glide gently, it will be beautiful
Become. There are still some polishing effects, but Seat that got hurt
I can not return it.. Note this point.
(I will glitter it by attaching a fine compound to the original.. )
I think that Material is oil resistant Nylon, but it becomes scratch and stepped wear
It is hard..
Just because it can not be used forever, exchange is necessary if you use it hundreds of times,
At that time I can not buy it at Rose because it hurts. Because it is expensive, I buy it every time in Set
It is tough..
Well, since it is possible to use it without any wear and scratches, if it is individual Youth
It may not be necessary to buy Spare.
View detail
It is a correct answer in a brand-name product reliable since heard that a cheap thing has exhaust leakage from details, the Kowa energy machine's product was decided on and it uses for a long time.
It is a correct answer in a brand-name product reliable since heard that a cheap thing has exhaust leakage from details, the Kowa energy machine's product was decided on and it uses for a long time. View detail
He bought it, in order to remove a Chain cover.Since a Bolt was not just going to enter by the ordinary Wrench, it was very helpful.Since a price is not high to there, either, it is good.
He bought it, in order to remove a Chain cover.Since a Bolt was not just going to enter by the ordinary Wrench, it was very helpful.Since a price is not high to there, either, it is good. View detail
It purchased in order to extract the bearing collar of the Stainless bearing of NSR250R. Since the width of tooth of 22 mm is quite a larger Size, those who are used for the same use think that what has width narrow to a slight degree is suitabl
It purchased in order to extract the bearing collar of the Stainless bearing of NSR250R.
Since the width of tooth of 22 mm is quite a larger Size, those who are used for the same use think that what has width narrow to a slight degree is suitable.
- which is helpful since the hard Race escaped only from that somehow -- when carrying out the leaving talk, it was very helpful, but if quality is also common and usually considers the thing of a delivery date or a mailing cost, the Home-center purchase of a price is first.
It is not necessary to hurry, and when placing an order for adjustment of mailing cost no charge, I think ant kana.
View detail
It was used in order to remove the flywheel of honda VT250 SPADA. (Refer to picture) The bolt attached to the crankshaft from the first is removed, and this rotor puller is attached, and it fastens and removes a flywheel. Since there was no reason
It was used in order to remove the flywheel of honda VT250 SPADA.
(Refer to picture) The bolt attached to the crankshaft from the first is removed, and this rotor puller is attached, and it fastens and removes a flywheel.
Since there was no reason for separating only by merely fastening a rotor puller, the flywheel was fixed by the universal holder, and the rotor puller was struck, turned and removed by the plastic hammer.
Since structure was solid, it did not feel uneasy at all about use.
View detail
It purchased by the adjust wrench set and a set for the tappet adjustment of YBR125 ('06). If die length was insufficient, it was worried for a while, but in my case, it was required sufficient die length. In the case of a motorcycle with bad serv
It purchased by the adjust wrench set and a set for the tappet adjustment of YBR125 ('06).
If die length was insufficient, it was worried for a while, but in my case, it was required sufficient die length.
In the case of a motorcycle with bad serviceability, a little longer thing may tend to work.
Since turn is only tappet adjustment and plug gap adjustment, after using, it washes by engine oil each time, wipes off lightly, and is IN at an attached case.
A few is a spell called the kana which lasts long ^^;
View detail
The thing which was being front-used broke and it purchased by the change. Since the gauge is comparatively legible, I think that it is good. I feel that it is somewhat high in case of the analog type of a vacuum gauge. -- (made in JAPAN therefore
The thing which was being front-used broke and it purchased by the change.
Since the gauge is comparatively legible, I think that it is good.
I feel that it is somewhat high in case of the analog type of a vacuum gauge. -- (made in JAPAN therefore ?)
View detail