Reviews
If it's a hassle to remove the Seat and wrap the Belt, ……
It is installed on Initial ModelBirdCity125.
I also use Gel Zab R with Belt with Large type NAKED, but I also go touring with 125 Scooter which I use for shopping etc., so I bought it with Timing for Seat reupholstering.
I didn't want the seat to bulge, so according to the Instruction Manual, I could cut off up to 2cm of the thin edge that doesn't have the gels in it, so I cut off that portion. I cut the Seat cushion in the shape of the Gel part, and put the Seat cover on it.
As a result, the wider Tandem side blended in well, but on the narrower forward side, the Gel zab appeared on the Seat surface, either because the Cushion was not sharpened enough or because the Gel deflection caused it to expand.
However, there is no problem in terms of use.
Yes, it does hurt when sitting all the time, but due in part to the difference in the shape of the Riding position and Seat, I feel that the Scooter takes a slower time to hurt compared to the NAKED.
If your Seat is large, I think this type is better.
It may be installed to refreshing the appearance of the Seat, but it may be better to think of this more as a way to avoid the hassle of installing it with a Belt on a Motorcycle for everyday use.
After installing it, I am now able to comfortably enjoy a short ride for shopping and other purposes.
View detail
Bar weight installed in conjunction with handlebar replacement
It reduces vibration to a reasonable degree.
The most Large effect is Dress-up.
View detail
Improved seating comfort
I don't have back pain, but I'm not a skinny guy and I don't have butt fat, so I'm not that uncomfortable Seat, but I still get sore after a few hours of riding!
I wish there was an OEMErgo Seat or something like KTM's out there, but there isn't, so I'm going to get one like this.
There are many things to worry about, from 5,000 yen to 10,000 yen - even 5,000 yen is expensive, but I don't want it to be ineffective, so I'm thinking long and hard about it.
Urethane mat type is comfortable at first, but after an hour on a chair at home, the effect is gone and rejected.
Gel is hard, but looks good for a long time, so I chose this one, although it is expensive
Refreshing and Fit to Zixxer Seat Shape is good
It is expensive. It's very nice and Large sturdy even if you leave it riding for two hours or so.
10,000 yen and up for a chair seems like a pretty high-end product, but I'm not sitting on a chair at home for two hours! (Lol)
View detail
It is safe because it is a car model Exclusive Design.
Replaced OEMHandlebar that was bent in a fall.
Since it is a car model Exclusive Design, it is also safe for Cable and other handling.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3
Wow, such a beautiful lever. It's very convenient and has a delicate finish
Wow, such a beautiful lever. It's very convenient and has a delicate finish The price is reasonable and the quality is better than expected. View detail
I need more weight.
I bought this Bar End for Steel handle because I replaced Handlebar with HURRICANEConti2 type. The weight of the Bar End is not so heavy, but I am not sure if the Steel handle is wrong or if the Bar End is not heavy enough, but my hands are numb after an hour of riding. Would a little more weight solve this problem? View detail
Lever is lighter and recommended for people with small hands. On the other hand, people with large hands should be careful.
Installed on a 2022 SV650.
The LeverDial for the Clutch adjustment is closest at 1 and farthest at 6. When the Dial is set from 3 to 6, the Lever interferes with the Switch box before it reaches the Grip when the Clutch is turned off, so the Lever holder position had to be moved 1 cm toward the HandlebarCenter. Therefore, it was necessary to move the position of the lever holder about 1 cm toward the HandlebarCenter side. Even so, the lever still interfered at positions 5 and 6, so those with large hands should be careful. In my case, I have small hands, so I decided to go with this.
Also, the clutch side play was too large when the clutch was installed with the front panel, but by adjusting the position of the lever holder as mentioned above, the play was adjusted to just the right level.
The weight of the Levers, which was a concern, has been eliminated to a great extent. Also, the easy-to-grip shape makes it less tiring.
The not-so-good thing is that Neutral is now a little harder to get into. (I checked with Motorcycle shop and they said that it still tends to be hard to get into N with external lever replacement) 。
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA
-2 cm is quite a difference.
-Just 2cm lower makes all the difference in the sense of security. If you do not have a rear stand, you should ask the shop to install it for you. It is possible to replace it without it, but it is dangerous. The height of the car will be lowered, but it will not affect the handling that much. View detail
It is large a small portion of normal differed from for a while. Operativity became good. The color chose gun meta in the meaning that only a few asserts KASUTAMU.
It is large a small portion of normal differed from for a while.
Operativity became good.
The color chose gun meta in the meaning that only a few asserts KASUTAMU.
View detail
Fits: HONDA CB400SF Revo[NC42] 08-13, HONDA CB400SB Revo [NC42], HONDA CB400SB [NC39], HONDA CB400SF[NC39]
[Buying motive] Since he wanted to unify the circumference of a handle by Black rather than an improvement of a position, it purchased. [Point which got interested] According to the switch box, although there were many which needs a drilling process,
[Buying motive] Since he wanted to unify the circumference of a handle by Black rather than an improvement of a position, it purchased.
[Point which got interested] According to the switch box, although there were many which needs a drilling process, it was usually charmed by the place that it was easily exchangeable by ending with processing beforehand.
It is also the point that coloring had Black.
Product ] which was seen as the candidate besides [ ! which wants to change a position dramatically is not considered and it is not necessary to change hose simply, and since it was good that it was simply and conveniently exchangeable, there is no product which was seen as the candidate in this time etc.
[After-use comment] It was not like [ worried ], although it was light compared with the pure handle and there was uneasiness in respect of vibration etc. in a handle simple substance.
They are comment which attach the bar end of the company, of course.
From the first, although a position is easy CB, it can operate comfortably.
However, although it was good for a while to attach, since my car body is exchanging for the back step, it has come to be thought that it is a somehow odd posture.
Although it is not bad, I think that I will exchange for the LOW type of the brand in the near future.
[comprehensive evaluation] -- a price -- handiness and attachment -- with all of simplicity and convenience, a comfortable position, and three rhythm -- measure.
It is a recommend at the direction where only a few wants to relieve a position, and Ho something who wants to change the color of a handle.
View detail
[Buying motive] He thought that he would unite by the same Brando, and it purchased. [Point which got interested] Ironic design which is not. Product ] which was seen as the candidate besides [ There was no compared product in particular. [aft
[Buying motive] He thought that he would unite by the same Brando, and it purchased.
[Point which got interested] Ironic design which is not.
Product ] which was seen as the candidate besides [ There was no compared product in particular.
[after-use comment] -- the accent of the circumference of a handle -- although it considered and red alumite was chosen, time takes for passing and has stopped being pleasing somehow
Tone of color alumite is not quite satisfactory somehow.
I think that I will exchange for the thing of black alumite in the near future.
as important bar weight, it is a function -- enough.
without it seems that SHIBIRE comes to a hand even if it will run 600 km ~ 800 km on the first -- a handle -- also getting the jitters -- it is not worrisome.
[Comprehensive evaluation] That liking of it has changed later this time carries out a recommend to those who it is not good and like the tone of color alumite, and those who are using the same Brando's handlebar.
View detail
The second-half type of aprilia RS250 It equipped. Since the width of a sheet and a form did not suit me, it is overall. The work which also deletes the portions of red-bean-paste omission and a side was done simultaneously, and since the hole was als
The second-half type of aprilia RS250 It equipped.
Since the width of a sheet and a form did not suit me, it is overall. The work which also deletes the portions of red-bean-paste omission and a side was done simultaneously, and since the hole was also opening the leather which passed for ten years or more, leather was also exchanged.
If facing is stripped off The sponge surface had discolored and it was hard.
When deleted on the whole, sponge became soft, but the location which places GERUZABU was deleted more than GERUZABU thickness, and processed the whole sheet.
The product itself The circumference had become the shape of thin sponge, and since it was a halfway size, it was cut and used.
When it could do, I wanted you to make the whole into uniform thickness.
Since soft leather was used, he wanted for original unevenness of GERUZABU to also have been transparent, to have been visible, and to carry out by seemingly being appearance normal this time, but if the person who sees sees, it will be the form which turns out to be GERUZABU insertion.
If it equips without red-bean-paste-omission-processing it, I will feel that it is slightly disgraceful.
Although it is use comment of wearing, it is even short distance, not to mention a long distance, until now. Although it was slightly serious by vibration which affects the waist, it is after wearing. It was thought that it was clearly soft and was carrying out vibration absorption.
Tuckers are cheap things, processing will become somehow, if leading [ of pliers, the slotted screwdriver etc. ] is carried out and they are performed, but if it is not the more dexterous one, it is likely to suffer troubles.
If cut processing is carried out comparatively [ with a high price ], he will be surprised at cheap structure.
I want you to consider the form and a variation which demotes a value to a slight degree, or is more easy to process it.
View detail
Fits: HONDA CB400SF Revo[NC42] 08-13, HONDA CB400SB Revo [NC42], HONDA CB400SB [NC39], HONDA CB400SF[NC39]
Although the amounts of adjustments are only few in every 5 mm and a number, it is quite large by a physical feeling. Since he was CHIBI, the pure handle felt a little distantly, but it became considerably easy when using this. It became easy in s
Although the amounts of adjustments are only few in every 5 mm and a number, it is quite large by a physical feeling.
Since he was CHIBI, the pure handle felt a little distantly, but it became considerably easy when using this.
It became easy in since a leeway was given on the arm also at the time of a right and left chip box.
A cornering is pleasant to say! A motorcycle feels it light.
Since the store was asked for attachment, Yukichi flew, but regret is not carried out.
View detail
Protect Grip
Grips are consumables. They wear out unexpectedly. You can replace the grips when they wear out, but the cost of a grip heater, an OEM product of a European car, is high. Therefore, Heat Shrink Tubes are used to protect them from wear.
For fishing rods. However, I am using this product, which is a Motorcycle product, because I am concerned about the appearance of the product.
To install, simply heat it up with a commercially available heat gun. The overall length is 105mm and fits snugly without cutting.
It may depend on the Gloves, but with the Gloves I use, I don't notice any slippage.
The grips are thicker, so people with small hands may feel some discomfort.
View detail
Gel is easy on the hips.
I have been riding ZEPHYR1100 for 25 years. I guess the urethane is too hard, not the spongy one, but the hardness of the urethane. The combination of the decline of the buttock muscles and the shabby rear suspension made it impossible for me to ride for 5 hours. I had groin pain and lower back pain.
I thought about uncoating, but my dad at Motorcycle shop recommended this. No problem to install.
The effect on touring is not yet, but when I use it for commuting, I have a feeling that the Gel absorbs fine vibrations. The sticky feeling is good. It is 1cm thick, but I don't mind the footing. There are some wrinkles from sagging, but it does not bother me when I sit on it.
View detail
Very comfortable
I asked the Seat shop to modify and install the OEMSeat.
The OEMSeat on the R nineT is split front and rear, with SS in both front and rear.
In my case, I felt discomfort in my buttocks after an hour or so with NORMAL, but after processing, I have no problem on the front seat side even when I use it for touring, such as driving 600 km round trip in two days.
However, the rear seats were not as comfortable as the front seats because the footpeg position was relatively high and more weight was distributed to the buttocks.
Still, I find it tough to spend long periods of time in Tandem if I don't have Gel Zab in.
I am glad I was able to get in.
Incidentally, although I had experience in reupholstering Seat Covers, I did not have the tools or experience to shave the anchors, so I asked PRO to do the installation.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA NC750S, HONDA HORNET250, HONDA HORNET600, HONDA CB750, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA NC750X
I like the texture.
I was not sure about the color, but I chose Gold to match the Wheel. It is a little darker gold than I expected, and I feel that it is a bit gaudy, but it is very comfortable to use. I was not sure about the U-KANAYA one, but this one was about 5,000 yen cheaper, so I had to wait for about a month and a half for it to arrive.
I was concerned about the Clutch Side because there were a few reviews that said it rattled, but it was Large and sturdy.
There are only four colors available, so it would be nice if there were more colors available.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-6RR, KAWASAKI Z800, KAWASAKI ZX-6R
Before you get stood up!
If you have any concerns at all, we will Recommendation.
It's about 20mm lower, so I feel more secure.
I got used to it and put it back in after about a month.
View detail
Position is now easier
I felt uncomfortable with the NORMAL position.
Changed at the same time the car was delivered.
Would it have been better if it had been a little more up front? But...
I'm happy with it
View detail
Black is highly universal.
I bought Black because I am generally conscious of Black.
A BEET Taper Handlebar was also installed.
The vibration was also good because I could hardly feel it in my hands.
View detail