Reviews
I like having a choice of lengths.
I use them all the time because of their price and ease of use.
It's nice to be able to choose the length, and it's inexpensive.
Brake Brembo conversion Used for ABS removal
I purchased 885mm this time, but I think it could have been a little shorter depending on how you handle it.
But this is the length of the caliper straight from the radipon.
The tightness must be gentle or it will cause scratches.
Careful
View detail
ACPerformanceFront Brake Hose Kit
I chose this product because I wanted to improve the appearance and brake performance of the front area! I also changed the handlebar, so I chose a length that took that into account. The appearance has changed enough, but I don't think the brake performance has changed that much because I am an amateur. (^^) Maybe those who understand it can feel it? View detail
ACPerformance lineRear Brake Hose Kit
I bought this product because I wanted to change the appearance of the suspension and improve the effectiveness of the brake. As I expected, the appearance of the parenthesis improved considerably, but I did not feel that the brake effect had changed by a large amount, since I am an amateur! View detail
If Handlebar and Riser are both NORMAL high, this is the one to choose.
The RedBlueSilverHose that was popular a long time ago was attached, but was replaced because it started leaking from the Crimp.
The clutch sides are now unified with the same material and feel good.
Length batch.
It is a life-threatening component, so if you cannot do it yourself, you should take it to the Shop.
View detail
Fits: HONDA NSR80, HONDA NSR80, HONDA NSR50, HONDA NSR50
I just need to install it for now.
NSR50 is now assembled from the frame. I have a 40mm long swing arm, but I think I can use the OEM length kit. But I don't know if it is the same for the handling. All installation is done by Quantity:I have not used it yet, so I don't know if it is controllable or not, but I have used this series on other cars, so it should be fine. View detail
BlackGold color.
Hose was also replaced while the Release was replaced.
If you want to unify the handlebar area with black color, this is the only choice for you.
Nowadays, there are cheap Chinese Hoses that are similar, but the way they are made is completely different and I am 100% satisfied.
Don't forget Fluid when you replace it. dot4 bought it.
View detail
Fits: APRILIA RS250 (Aprilia)
BrakeTouch drastically changed, for Stainless MeshFR
I had a hard time with the OEM rubber hose, because the clearance between the banjo bolt of the Master Cylinder and the Fork was too narrow, and I had a hard time with the hose routing etc. The OEM brembo horizontal MASTER might not have been so difficult. I had to cut the handlebar right and left many times to check the interference and tensioning. No Fluid leakage and no problem. View detail
Fits: APRILIA RS250 (Aprilia)
RR side doesn't show much difference in fee rings, but aligns with FR.
One of the troublesome parts of the RS250 is the RR Brake fluidReserver tank in the Seat Cowl. The stop-lamp switch was replaced with a pressure type when replacing the rear sets, and connected with a watertight connector. View detail
I always use it
I use it all the time, I think it is the best cosmetic product. View detail
Fits: KAWASAKI NINJA2 Helmet50RSL
Anodized Treatment is beautiful!
Control performance is also unquestionable! It is very durable without breaking! The colors are beautiful and give it a custom look, so there are no complaints! Comes with an easy to understand instruction manual and a nice looking Sticker! View detail
Fits: SUZUKI RGV250 (Gamma)
Price & Security
NORMAL Brake hose on a 25+ year old vehicle.
Then, I decided to replace it because I thought it was a bad idea.
Rear brake was not replaced because I am of the school that does not use it much.
This product was reasonably priced and seemed to be of good quality.
Purchased
I have only driven it for a short while after installation,
I think BrakeTouch has improved.
Most importantly, I feel more secure.
I think it is a good product.
View detail
Mounted on ZZr250
Exchange from OEM
BrakeTouch is better now that the expansion is gone.
View detail
Mounted on ZZr250
Exchange from OEM
BrakeTouch is better now that the expansion is gone.
View detail
Good Braking Response
After switching from stock brake lines to AC Performance Braided Lines, there is a huge difference on braking response and no extra effort is needed when hard braking.. Will recommend! Installed on my 2019 Serow 250. View detail
Excellent Quality and Best Upgrade!
Product quality and finishing is excellent, although the alumninum nuts are slightly soft and can be damaged easily when tightened. Immediately and greatly improves the braking power using the stock brake pump and calipers. View detail
Excellent Quality and Important Upgrade
Product quality and finishing is excellent, although the alumninum nuts are slightly soft and can be damaged easily when tightened. Immediately and greatly improves the braking power using the stock brake pump and calipers. It's slightly longer that stock and needs to be looped to prevent it from swaying around. Mine is slightly touching the caliper and needs some protection. View detail
Fits: YAMAHA TT250R, YAMAHA TT250R RAID
There is a difference between the product image and the actual product.
In the image, it looks like there is no Nylon Slider for off-road vehicles, but the actual product has a NylonSlider just like the OEM one. This is unexpected in a good way. The tightening part of the hose and banjo is not tightened, which I think is for the purpose of securing the freedom of installation. So, don't forget to adjust the angle and tighten it after installation. I am satisfied with the product itself, which is tightly Touch and Large. View detail
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400
Used for ZrX400 early period
[How is it used? Rear master cylinder replaced during O.H.
Was the one you received as per Image? It was very good
Was the installation difficult? No problem.
How was your experience with it? I am satisfied
[Included Parts:were they on? Yes
[Was there anything that disappointed you? None
Very good product and I can recommend it.
View detail
Total coordinate
I have been installing and replacing them one after another, starting with the ones I found and liked at Oak Auction. Thanks to your help, I was able to find Brake and ClutchLine, the manufacturer of which is RoseRose. However, I was happy when I replaced them because the Touch and shape were much better than the OEM ones. Recently, I felt this was not good enough and decided to make it consistent. The feeling of using it is almost the same as the previous one, since it is also a mesh hose. But it is good looking. That is the Large thing. View detail
I am satisfied
I prefer colors that don't look like they are being changed. [Color] I chose Smoke and it looks great. I had no problems installing it, and I am satisfied with the construction of each part.
A separator was included, but I thought it would be better to have a hose clamp rubber included.
View detail