Reviews
Lowdown
I installed it on CB1100SC65
Originally, the Seat height (785mm) is low on the motorcycle
The car weighs 243 kg and I want to support it firmly on both legs
Purchased
Installation is easy (about 30 minutes) with the Center Stand
Remove the upper part of the rear suspension and set the rear tires free (after a number of years of practice)
Installing this device and lifting up a RearThailander with the device Suspension
Quantity:Set and you can do it
At that time, you need to tap it with CushionHammer when you install this device
It's not easy to get in Also, while lifting a RearThailand a alone
Rear suspensions can be difficult to install, so lift the rear tire An aide
It is easy to install if you have it
Even if the ride height is lowered by 15mm, I feel more secure when stopping
When considering Lowdown, I thought about removing the anchor of Seat, but
It's a more comfortable ride this way
View detail
GOOD!
I purchased this product for use with my Royal Enfield Continental GT650. Two original holes were used and two additional holes were drilled and mounted. View detail
Fits: KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W650
It looks good and is well made
Replacement from OEM Product Good texture and no installation problems
If the material is Aluminum or Plating, you can use Engine or I'm glad to see that it works well with the Exhaust System
View detail
Good quality, but maybe a little pricey
I installed it on a 2017 MODEL CB1100EX with no problems
The quality is good, but I wish the price was lower
If you have a Fender Eliminator or a short fender on, you can use I think it's a good idea because it makes the front area look lighter
The photos are of the Fender after and before it was replaced
View detail
Excellent dress-up effect
The mirrored surface of this item gives it a nice texture, and the impression is quite different, standing out casually
I want to polish it often and maintain it because it gets dirty easily with mud splashes etc
I think it's practical enough as an Under Guard
The Engine Mount is tightened together with the Engine Mount, so you can use a torque wrench to install it exactly I think it's best to tighten it up
View detail
Honda CB1100 fork boot
High quality fork boot for the CB1100. Fits perfectly, flawless manufacturing. Easy to install and gives your Honda that classic look while protecting the chrome underneath. Highly recommended. View detail
Honda CB1100 fork boot
High quality fork boot for the CB1100. Fits perfectly, flawless manufacturing. Easy to install and gives your Honda that classic look while protecting the chrome underneath. Highly recommended. View detail
Fits: その他 , HONDA CB400SS, YAMAHA SR400, YAMAHA SR500
Aluminum rust will appear and needs to be polished regularly
The shape is a little too punchy to match with Classical Style
I think it's a good idea to match it with a high performance system
Since the fork diameter is the same as SR400, you can use the same fork
It's not too difficult to install, just remove the Top Bridge and fit it on top
The bolts around the Top Bridge, such as Stem Nut, will have a great effect on the stability Make sure you tighten the torque wrench to the specified value
The rust of Aluminum floats a little bit due to aging, so I sometimes use PIKAL to polish it Let's
If you don't bother to take care of it, it will turn white
View detail
Functional performance aspects Cover itself is good
Motorcycle Parts Overall
Why do you make Reduction in cost with a little thing?
Overall it is very good
Bolt included Stainless Nut Steel iron
How many yen Reduction in cost are you targeting for reason not to make Nut Stainless?
I liked the shape of Body itself as I was thinking in length as well! As I put it out for Anodized processing immediately, the light is duller than this product, but it is a good feeling in Buffing before Anodized
Installation precision is provisional, but there is also free length and its neighborhood is also good
Body is not Fork mounting part is Stainless material
I think that it would be considerably lighter if Aluminum was there, so that VERSION would have been chosen if it came out!
One Bracket feels heavier than Fender
Before mounting it may be remade from the included Bracket by size measurement It feels so heavy and private
Overall it's a good Fender
BracketStainless Mounting NutSteel iron
It is the factor that only went down
View detail
Somewhat unsatisfactory to seek luxury.
Shape, texture is good. Moreover, it is possible to install neatly without distortion, it is highly durable. However, due to the fixed Tie Wrap there will be cheap feeling there only. Other than that it's a faultless finish. As with OEM, if you are Type who keeps Band Screw, I think that the quality will be better by further luxury. View detail
cheap!
I bought it because I changed SR 400 to electric type Tachometer.
Since O-ring is not attached, I think that it is good to separately purchase OEM Parts Number of 93210-14104 59 separately!
Things of with O - ring are coming out from other companies, but since this one is overwhelmingly inexpensive, it is Recommendation (` - ω - ´)
View detail
I am satisfied.
I think that OEM is more beautiful for the whole Line continuing from the Sprocket cover, but it is also light appearance in Slim and still looks Parenthesis. The mounting on the DrivenSprocket side is a long hole so you can adjust the height (Picture is the highest position)
Sprocket cover side installation Bolt, RubberDamper is OEM diversion, but it was able to substitute UniversalH Type RubberFor M6
In one point, fixed Nut of Sprocket and fixed Bolt of this product seemed to hit the interference Limit, so I caught a piece of Washer
View detail
Almost satisfied.
As the sitting position got lower, the foot got better.
Mounting Easy.
However, it seems that rainwater will accumulate in Seat when using it in rainy weather,
At a later date, even if it is sunny, water seeps out when you sit down.
When Seat is removed and SeatRear is on the way, the water comes out steadily.
Even if you stand upright, you can not completely drain water, even if you sun it in a sun-dried state for a half day, even if you leave it for a half day you will see a little.
Do not use it in the rain, Bike Coveretc. It is necessary to take measures to prevent it getting wet.
If it is forced to use it in the rainy weather, you can not use it unless you prepare for Pants to get wet the next day.
View detail
Fits: YAMAHA sulfur oxide (SO, SO2, etc.), YAMAHA SR400, YAMAHA SR500
Nice
We bought to install separate steering wheel. To install a separate handle, you must not have just the handle. You must have a short cable for brake, throttle, clutch, decompression, and a handle stopper, which is of very good quality and is unlikely to rust. Installation is very simple. You only need to connect two bolts. I bought a three-rate handle to install. You should not only have a handle to install the three-rate handles. There must be a short cable for brake, throttle, clutch, or compressor, and the handle stopper must be present. This handle stopper looks very good in quality and does not rust. The installation is very simple. You only have to connect two bolts. Translated by Microsoft Translator View detail
Front fender
Good quality front fender and a nice replacement to give my sr400 a cafe racer look. Looked just like the pictures and fitting was super easy. Would definitely recommend this product! View detail
Installed in model 2004 RH 01 J
Making is solid.. I think that you do not need to be conspicuous even after installation.
However, it was very difficult to install.
Handling Instruction Manual It is hard to understand, Screw, Nuts are not likely to be used as it is, I bought Nut again at home center and installed it by trial and error.
CDI mounting holes do not seem to have Gap in their year.
View detail
Fender cb400ss
Nice fender, looks great on my CB. Very light due to it being made from aluminium. Handy that the brackets have slots rather than screw holes so the fender can be raised or lowered to what looks best. Needed to drill one hole to fit the bracket that holds the brake cable but that was easy enough. I think I should mention the finish on the guard is very easy to scratch. I scratched mine just by polishing it with autosol. View detail
The substitute has also been broken
Returned as initial malfunction in which the key spun, substitute arrived.
Quickly, mounting. It works well.
The next day, moving it for 1 day, the key is idle.
I thought it was a lie, I thought it was broken.
When removing it from the car body, the cylinder and Stopper came out and spotted out..
Yup.
I thought about returning, but even having to send it back already (Lol)
Because WM is a well-established store, it is a very favorite maker, but this time it was really stuffy or only a disgusting feeling remained.
No way, what is a defective product twice - - -.
I decided not to return goods contact.
As other people seem to be working well, I wonder if I lose luck very much?
View detail
The unexpected struggle
I bought it with apparent appearance. I think that it is good and cheap, because of the price, but I had to bend the Bracket when attaching it. The biggest Neck had to change Handlebar to Separate and it was useless. View detail
Satisfied
I am wearing it simultaneously with WM's Handlebar Stopper.
As described in the explanation, I do not have with Collar, but if using Handlebar Stopper together, there is no problem.
As for the appearance, it is beautiful at first as shown in the photograph, but as it is for Aluminum as it is, it will be called immediately.
I do not mind it because it is not a prominent place.
There is no particular problem with locking.
Although there is no tightness when crime prevention is done, it is good to put on because there is no feeling and feeling of security is different.
View detail