Reviews
Used for Exhaust System production
Used to make an exhaust system for a YamahaXV750E.
I used to use the ones NeoFACTORY handles, but when I bought the CFPosh ones to try out, I felt the quality of the bending process was better, so I decided to use CFPosh ones again this time.
As the description says, this Pipe has a high roundness rate regardless of the angle.
The Pipe itself is just a steel pipe, but the quality was good.
Also, although it was a cheap semi-automatic welder, it was able to weld without any problems.
I would like to have the opportunity to create another one next time and to purchase a Bend pipe with the Pipe diameter & bend angle I want.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG
Tank Cap CoverBolt
24GoldPlating is a lighter gold color than Anodized Gold.
The appearance is completely different.
View detail
Fits: HONDA NSR80, HONDA NSR50
The code is a little long.
With NSR50, the code is a bit long.
Power has gone up a little bit, I think.
View detail
second purchase
I bought the same product 4 years ago and used it well, but the temples broke and I bought a new one.
I've been using it for 4 years, so I can say it's very sturdy.
I don't know if it's designed for Asians, but after wearing it for 4 years, it's comfortable to wear.
It also blocks the wind quite well. -------------- Four years ago, I bought the same product and used it well, and I broke my glasses legs. I've been spending 4 years for a low price, so it's very strong. I don't know if it's customized for the Asian body, but I actually wear it for 4 years, and the comfort is comfortable. The wind also blocks quite well Powered by Google Translator
View detail
For Exhaust System production!
It was used for the production of the original Exhaust System.
It is a 750cc 2-cylinder, but it is not such a sporty Engine, so we decided to make it with 38mm just below the Flange.
In the case of VTWINEngine like I am doing, I could easily make a front bank by buying a Pipe with a 180 degree bend and a 60 degree bend, and cutting and stretching it well.
The one I purchased this time is for Rear bank.
Rear banks have to be twisted into tight spaces, so they end up having to be chopped up.
The Pipe itself is frankly just a 1.6mm-thick steel pipe, but it is bent almost as a new circle.
Last time I bought BentPipe, which is handled by NeoFACTORY, I felt that CFPosh was better in terms of new circularity at the beginning of bending.
By the way, the product image looks about 100 degrees, but please be assured that what you will receive is a proper 90-degrees bend.
View detail
Fits: KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg
PoshLED sequential
Installation of the product was easy, even for an amateur.
It was very bright.
View detail
I was confused because it is not a Silver color.
SilverPosh, the standard for Racer's NSR50.
It came with the one when it was Silver color, but I bought it due to suspicion of malfunction.
I had heard that the part number had been changed after the model change, but it is now black, even though it is commonly known as SilverPosh...
I was anxious and checked it many times, but it is working fine.
View detail
Oil seals like oem
I buyed these seals for a rebuild and they are like oem nice quality i hope they will last like oem quality. No oil leaks at the moment I am happy View detail
Quality as good as the price
There are similar products with lower prices, but I am satisfied with POSH products because of their higher quality. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Long Exhaust Nut
I purchased silencer attachment pins to the cylinder on my Honda monkey for corrosion protection. In terms of quality, everything is fine, they are well loaded, the appearance is gorgeous. I recommend to purchase ... View detail
I choose Racing grip.
For many years, only the open end was available, but in recent years, only the short type is now available with a closed end to match the Scooter and other models.
I feel most comfortable with this racing grip.
In Circuit driving, it is very easy to operate and use from SmallEngine Displacement Volume to LargeEngine Displacement Volume.
I think it is not tiring and universal for both city driving and touring.
I guess the drawback is that the Design is a bit old-fashioned.
View detail
Fits: HONDA Super Cub 70, HONDA Super Cub 90, HONDA little cub, HONDA little cub
There's no substitute for this.
When I went touring, the CUB had a low throttle, so I had to re-grip it in many situations, which was a hassle.
After replacing it with this one, you can perform accelerator operation just like a normal motorcycle.
I was licking my chops! I should have changed it earlier.
View detail
Anti-theft and dress-up
I use it on all three of my motorcycles. It is a good anti-theft measure and also has a dress-up effect. Highly recommended. View detail
For vehicles registered as Class 2.
I installed this on my class 2 registered VINODELUXE and I think it is a must have for a class 2 registered moped. I am glad that the Triangle Mark Sticker is included so I didn't have to buy a new one.
The finish on the corners of the Holder is not good. I was also concerned about the weight of the Holder itself, but it might be good for durability.
View detail
It didn't have to be Chromoly, though.
Before, we used Stainless cap bolt and nut to fix the silencer of the Exhaust System, but they were chewed and stuck, and we had a hard time to remove them without cutting them with a grinder. I used Chromoly cap bolt and iron lock nut to fix the bolt.
I could have used a regular steel bolt, but I couldn't find a steel cap bolt at any of the home centers in my neighborhood.
View detail
Cap bolt gives it a Custom feel.
[How is it used?
The Normal bolt was a little rusty and I purchased this to replace it.
Was the one you received as per Image?
Material:It is Stainless Steel and has the same quality as the Image.
Was the installation difficult?
As long as the specified Torque is adhered to, replacement is easy.
How was your experience with it?
Disassembly of the engine is now easier. Also, it seems less likely to deteriorate over time and looks more Parenthesis.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
No. Material:Stainless Steel allows maintenance without worrying about rust in the future.
▼KITACO's Bolt with Flange may have been better because it was easier to tighten the Torque evenly.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA BENRY CD50, HONDA monkey, HONDA Super Cub 50, HONDA dachshund, HONDA jazz, HONDA magna fifty, HONDA Monkey BAJA, HONDA Monkey R, HONDA Monkey RT, HONDA jazz, HONDA magna fifty, HONDA Monkey BAJA, HONDA Monkey R, HONDA Monkey RT
CUB To the Overhaul of the system Engine!
CUB This is a must-have product for the Overhaul of the System Horizontal TypeEngine. Low cost and safe to use. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
แฮนด์ตัวนี้ราคาไม่แพงครับ น่าใจ View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 110, HONDA SUPER CUB110, HONDA CROSS CUB, HONDA CROSSCUB110
Satisfied
Installation was not difficult and only took a little time to adjust the position of the removed pedal. Is the effect self-satisfying? I think it's more solid than the original. The price is reasonable and I am glad I bought this product. I am satisfied with the beautiful workmanship. View detail
Fits: HONDA little cub, HONDA SuperCUB [Super Cub]., HONDA little cub, HONDA SuperCUB [Super Cub].
It fit better than I thought it would.
The grip felt more comfortable than I had imagined.
Installation went more easily than I expected. It went on more easily than I expected.
If I`m not using Air compressor or Cleaner system, should I have used Grip military hands?
In terms of time, it takes about 10 minutes for both.
However, because he worked with his bare hands, the skin on his hands was torn in two places.
Also, the Accelerator Wire broke when I plugged in the Axel side ….
It may have deteriorated considerably, so it was time to replace it and reopen it.
Recommendation:Stop forcibly working on the Accelerator Wire and remove it.
In case you are wondering, we used a special adhesive.
View detail