Reviews
Fits: Others
OH of DAYTONANISSIN Master Cylinder
The BrakeTouch on my Z650 (Zapper) is getting worse, so I thought I would use the DAYTONANISSINMaster Cylinder OH and bought a repair kit.
Replacement is not particularly difficult if you have Snap Ring Pliers. It is more time-consuming to bleed the air after replacement.
Comparing the removed parts with the new seals, we found that the elasticity of the rubber and the tension of the rips were stiffer on the new seals, indicating that they had deteriorated to a certain degree.
Touch has improved a lot with the replacement, so I think it was effective to do it.
However, the DAYTONANISSINMaster Cylinder (different piston size) used in another vehicle (GN125H)
No deterioration of Touch despite longer use than Z650.
The degree of deterioration varies widely depending on the vehicle used, the use of brakes, and the piston size of the MASTER.
View detail
Fits: その他
Overhaul.
For the overhaul of a 10 year old Brake master cylinder. Disassembled and cleaned plus replaced this Kit. Fittink is a ManufacturerRepair product so it's perfectly fine, I'd like to have the RubberBoots only sold. View detail
Fits: Others
For OH
Nisshin Horizontal Type Master Cylinder is used for about 8 years I was, sir
I bought it for OH
I was nervous to install the rubber on the Piston, but I was able to get the Piston Rubber has been installed
It would actually be nice to have a special tool
OH is not a particularly difficult task
The next one in five years, eh?
I wish I had a setting for just Rubber
View detail
Fits: その他
Seal kind was available cheaper than OEM.
DAYTONA COMPANY ProductNo : We used 24443 for the 14-diameter OEMRear master OH of ZrX1200R. Only PrimaryCup and SecondaryCup can be used, but it is cheaper than purchasing OEM with Assy. View detail
Fits: その他
Replace with Overhaul
I thought it was overhaul because I fixed it, but I chose a bit cheaper one.
Since it is a special kit, it can be exchanged for exchange without any problems,
If possible, set parts only for Rubber seal
I wish I had it..
View detail
Fits: その他
I regained original performance.
Seven years after purchasing Radial master, Overhaul of Master cylinder was implemented as the effect of Brake was affected by Downs of each part..
I tried incorporating a new item instead of a disassembly cleaning. The dragging of Brake, which seems to be caused by clogging of Return port, was also eliminated, and the original performance was restored. Now you can run with confidence.
View detail
Fits: Others
OEM horizontal mounted integral type used with MASTER's OH
1 for GRASS TRACKER / 2 MASTER
I bought it for OH.
Master cylinder treated as DAYTONA
Repair kit is SEA BASS, Honda's of
It's better to be cheaper than asking for OEM Product number.
It is strange, Seal to Piston
Packaged in embedded state
There are cases where the case and the case are not mixed.
It is lucky to receive it when it is built in.
This time I made it by myself for a long time.
View detail
Fits: その他
Raipon BMASTEROH
【What made you decide the purchase?】 Required item
Since all the necessary Parts are complete, trying to Rose does not mean that it was necessary, as Cup is sent with it wearing, so it will not be mistaken as to make a mistake.
【How was it actually used?】 Required item
Sometimes Brake 's Touch had changed but it changed and Touch changed and it got better.
【Was it difficult to install? (Hard parts case)】 Any item
Basically just replace Parts in Cylinder
It is easy if removing and installing the Snap ring is successful.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any item
It is natural, but let's clean the inside of the Cylinder cleanly.
Woundetc. If there is, polish with a fine paper along the direction of the circle. Be careful if polishing in the moving direction of Piston may cause Oil leakage.
Do not forget to apply Brake fluid to Cup and Silicon grease to Boots during assembly.
After assembling, make sure that the Snap ring is properly in place Piston's motion is Smooth.
Air bleeding firmly.
[Is there anything I was disappointed about?] Required item
None
【Hope for Manufacturer - Please let me know if there are any improvement points] Required item
None
【Have you compared items?】 Required item
None
[Others] Any item
Raipon BMASTER is Wee Big's thing handled in 3 types OthersManufacturer OEM Because it is that there is a product, it is a necessary confirmation when purchasing.
When I do not understand, if you send the image of MASTER to Wa Big, you will be able to distinguish it from the image so I think whether you are concerned about the uneasy one.
I forgot to take pictures in the work process.
Sorry that there is not much meaning only with the images of Parts removed.
View detail
Fits: Others
Mounting on NSR50
I attached it to OEM Master cylinder of NSR 50.
Piston and Dust Seal were damaged when I attempted to install the master cylinder of NSR 50 for discizing APE 50, so I bought it for OH but it was installed without problems.
View detail
Fits: Others
Although the master of the daytona nisshin was attached to KSR purchased in medieval times, the motion was quite bad in whether it has adhered to with rust, and it purchased the repair kit. Although exchange only removes and replaces a snap ring,
Although the master of the daytona nisshin was attached to KSR purchased in medieval times, the motion was quite bad in whether it has adhered to with rust, and it purchased the repair kit.
Although exchange only removes and replaces a snap ring,
Removing this clip could not remove without the serious snap ring pliers which he has since the ring is very well contained in back one arriving to the back, it was able to bring to the company, and it was able to remove somehow using long-legged pliers.
I think that the touch of a brake also becomes good touch like a new article, and after exchange becomes operative realizable maintenance.
View detail