Reviews
Fits: BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT
Standstill protection-Engine Guard
[How is it used?
RnineT is for a low center of gravity, so I knew it would be hard to stand and jostle, but I installed it just in case.
It's been six months since the car was delivered and we haven't had to take care of it yet. (⌒∇⌒)
Was the one you received as per Image?
We had the standard item from Dealer installed as is.
I was worried about the one from rizoma, but this one seemed to be more firmly guarded around the head.
I had this installed because I had the actual product.
I was not particularly concerned about Engine Guard.
Was the installation difficult?
I asked the Dealer at the time of delivery, so the degree of difficulty is unknown.
Probably, it should be Bolt On because it is a vehicle-specific product.
How was your experience with it?
Luckily, we have not been taken care of yet.
But this bar has more to offer than just serving as an Engine Guard.
I've seen people use it as a Mount for Fog light and ActionCamera.
There may be times when you use it that way….
[Included Parts:were they on?
I don't think there was any problem.
The optional Wonderlic ProtectionPad for Engine Guard/Tank Guard (item no. W35833-002) can be installed.
[Was there anything that disappointed you?
This does not mean that they are disappointing, but they do look a little stiffer.
That is cool, so I guess it is a preference.
I am planning to install an Under Cowl in the future, and I am wondering if I should remove the Engine Guard at that time, or keep the Engine Guard installed and install the Under Cowl. (I heard there is such an Under Cowl. I'm searching for more information now.)
View detail
Fits: BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT
Good thing I left it on.
Since I had the dealer install it when I purchased the vehicle, I won't give an evaluation of the installability.
First, the appearance.
The car has a lot of black parts including the frame, and the black engine guard grows out of the black frame, so it doesn't feel unnatural even if it is covered with a silver colored Hend Cover.
And the important thing is that the protection is godly!
Quantity of so-called "standing moss" on a public road:Pair (for Left and Right) I defeated each of them once, and almost all of them had no damage except for the Engine Guard.
(This is only our experience. The results may have been different depending on how and where you fell)
When I tipped it to the Right, I had the Tandem Footpeg out, so the Wound was in the tip of the footpeg. If I had stored it, it would not have grounded.
Quantity in low position:Pair (for Left and Right) The end of the handlebar extends to the top of the handlebar, so the end of the handlebar won't be grounded by a mishap.
Therefore, it is easy to wake them up.
For the repair, I roughly dipped the paper file in it, blended it in, and painted it black with Touch pan.
It is recommended to wear it if you are not sure about your footing or leg strength.
View detail
Fits: BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT
2021 rninet.
I wasn't sure if I could install it on my '21 rninet, but I did.
Compact, discreet and solid compared to OEM.
I think it is better to do the installation work by two people as much as possible.
You will need someone to hold the Wrench on the One Side when you tighten the Bolt at the top.
You will also need a screw lock and a T55 Torque that can be removed.
Apply a small amount to the tightening bolt at the bottom and tighten, as the vibration may loosen the bolt.
I installed it by myself, but it was Large strange not to put Wound on Engine etc.
View detail
I installed the Engine Guard and took it down. GSX-S125]
https://youtu.be/VqFreRzr1to
Engine Guard installed:https://amzn.to/3sWRcNO
Hepco & Becker I installed Motorcycle's Engine Guard for the first time because I was afraid of tipping over.
This is a husband and wife Moto blog.
Because my wife wants to ride GSX-125, I installed it by the fall of the day when I ride it by moped 2 class Touring someday, and the countermeasure against a standing fall.
It was my first Custom and it works. I recommend it.
View detail
It's quite authentic.
I bought and installed this product just in case my motorcycle had been knocked over in the past and was covered in scratches.
The installation is quite Large strange. But it works well.
good point
The body of the car almost collapsed in the earthquake, but it was safe.
This product is designed not only to protect the engine, but also to prevent the rider's foot from getting caught in the hanger when falling.
Very sturdy.
The body of the car will be stable.
A bad point
Installation is troublesome.
Unlike a car, a motorcycle has two tires, so falls are inevitable, and of course you need to be careful, but you also need to be prepared for accidents. These parts can protect both the vehicle and the rider.
I was really sad when Motorcycle was knocked down in the past, I don't want to experience that again.
Just in case.
View detail
Fits: YAMAHA Tracer 900, YAMAHA Tracer 900 GT, YAMAHA MT-09 Tracer
Rugged Tough Image
We are using this on my father-in-law's 2017 ToRacer. Actually, he had this on one of the 092 mt's we owned before, as it was a STREETRALLY 50 Spec. It looks great on my father-in-law's ToRacer. It is very Race ish and sturdy construction. The only drawback is that it gets in the way when you hang off. View detail