Reviews
Fits: KAWASAKI Z900RS SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
A little disappointed.
The design is great, but long touring is a pain in the butt for me personally.
As a result, I purchased DAYTONA's Gay Lupinz.
View detail
Buy for summer
I bought this one for the summer, which I thought would be cooler and less affected by the sun.
Arrived and tried on the product....
I heard what sounded like a drop and when I checked, a makeup Button had fallen out.
It had fallen out of the area where the Tag? is stopped at the back of the neck.
Unfortunately, I repaired it with glue (T. T)
View detail
JapanManufacturer reaffirms its excellence
Bagnoia MODEL has a 22-year Replica. (In Japan) I bought it right after it was released, as it was a fulfillment of a long-cherished wish that I had had for over two years, as it had never been released. The shape is completely different from JapanManufacturer's, and the parenthesis is very nice. However, the functionality is not as good as the JapanManufacturer.
Size Sensation
Larger than Arai and SHOEI.
The Cheek Pad is quite tight, but other than that, the entire head is not held except for the cheeks, which are large. The entire head is not held like in Japan, and the shallow fit makes the wearer feel uneasy about taking off the head at high speeds.
I was a medium size.
The wearing feel is completely different from Arai and SHOEI, and is similar to AGV, including the Size feel. (No experience wearing Manufacturers other than Left Ki).
The Arai L size is my usual favorite, and although it is slightly larger than the Just size, it does not gap at high speeds. It does not give me any headache and is an ideal fit.
Large size of the cap
The cap size differs between M and L, so it is quite Large compared to Arai's L. (Arai caps are the same for M and L)
[Weight
It is light for its large size, perhaps due to the use of carbon in some parts, but not enough to impress.
Finishing
Do not expect the quality of Japan.
[Shield]
The Shield itself has no distortion, and its resistance to fogging is much better than Arai. The Shield itself is not distorted, and its resistance to fogging is much better than Arai's.
Wind Cutting Sound
Quite Large compared to Arai, uncomfortable. I was surprised at how different they are.
[Ventilation
Arai's RX-7X is far superior. In the first place, I couldn't feel the wind escape at the top of my head….
【Review】
It must be a pretty good product for the price." If you buy it thinking that you will regret it, you will surely regret it.
Design is good, so I think it's Collector's Items or something to show off to those around you.
Arai's RX-7X, which is less than half the price, is far superior in terms of functionality. The only thing I felt was better was the Shield connection.
Ironically, it was a kick-ack reminding me how great JapanManufacturer is. I am an AraiUser, so perhaps I feel that way more than I should.
View detail
DAYTONASingle riders jacket
It is a price
If you don't have a particular preference, I think that's enough.
The quality of the leather is good for the price and the workmanship is not bad.
Feels a little heavy.
I only tried it on to check the size and returned it.
No feedback from the ride.
View detail
A little defective?
I think the size is a general size. I usually use a L size, and this item is also a L size and feels just right. When I first put my hand in the item after receiving it, my finger was supported in the middle, as if the sewing of the small finger of the right hand was not done well. I changed the angle of the fingers and put them in and they went in easily. Therefore, I gave it two stars for satisfaction. As for the protection, which is important for riding gloves, there is something like a protector on the back of the hand, but it is a soft material, so I think it is not suitable for intense riding. I use them mainly for commuting, so I think they are sufficient. The leather is not too soft and not too hard. I think it is worn in spring and fall. The wrist spec. is not long, but not short either. It is somewhere in the middle. I think it is just right for spring and fall. View detail
neck-mounted digital voice recorder
As a Type without Wiring, I bought it for its ease of use.
The neck is thin, so it's hard to fix it. It is lightweight, so there is no burden on the neck.
As for the images, they're pretty good. (I'm checking general and wide angle, fisheye, not yet) . The sound sounds almost like noise to me.
The operating time is short because it is a rechargeable Type, but it is possible to use it for commuting to work, etc.
View detail
Crafting accuracy is not so good
There is a cut-out Sugar Crystal step near the shaft center.
This made me wonder if Large is sturdy enough.
Unlike Front, Rear is honestly not as effective.
I don't know. For this Gold amount, I should have gone with the KMT product for $57,000.
View detail
useless
Purchased for Spoke maintenance. Conclusion:It can't be used. First of all, I can't use it with Harley because I can't get over the bumps. It was faster to use Jack. View detail
Fits: HONDA CROSSCUB110, HONDA MONKEY125, HONDA CT125, HONDA DAX125, HONDA GROM
Oil leak
I ran around the neighborhood and after one night it leaks oil. View detail
Logo will soon become Brown.
I used it for upright Fork.
I have no complaints about the product itself, such as the Tie WrapGap prevention, easy installation without removing the Tire, etc., but the Logo turns Brown quickly.
Other than that, I really have no complaints, it's just too bad.
View detail
Fits: KAWASAKI Ninja ZX-25R
The sound is good, but … the quality is disappointing.
The volume is a little louder than OEM, and when idling, it has a nice bass sound.
The running sound is more outgoing than OEM.
However, long-time operation can cause sound fatigue.
Since it is a slip-on silencer, I can't feel the increase in power or anything like that, but I think I'm satisfied with it for the enjoyment of its appearance and sound.
I like the product, but there were many scratches and scuffs on the carbon part of the silencer end, which made me feel the quality control was low.
I have bought several YOSHIMURA Exhaust Systems in the past, but this is the first time I have ever seen something like this, which is a shame because they are expensive Parts.
View detail
Not to say it's defective, but ….
TotalQuantity of 2 for Shoulder and 2 for Elbow:1 Set of 4pcs. for ElbowQuantity:1 pc. had a different thickness than the other three. (Thickness is about 1.25 times as thick as the others, and the Large size is also slightly Large size.)
The thickness is not a problem because it can be cut, but there is no way to control the thickness.
Quantity:Pair (for Left and Right) It is a little weird that the feel of the product is different in
But I noticed the thickness was different after I cut it, so I couldn't return it … I guess I'll just have to use it as is.
It is light and has good breathability, but the protection function is not so good. The Level is acceptable for city driving and short-distance touring.
View detail
Fits: HONDA Giorno2, HONDA Byte, HONDA CREA SCOOPY, HONDA GIORNO CREA, HONDA SMART DIO-DX, HONDA SMART DIO
Boss does not fit in Pulley.
The clarity of the bushings on the pulley was not quite right and the OEM bosses would not fit. Is there a difference in the product, or is it an individual difference in the Both Sides of the car? (・・;)
I managed to insert and install the bushing after grinding it with PaperFile, but it is not as smooth as the OEMPulleyOEM boss combination, so it is a bit of a bummer.
View detail
Fits: KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
the same as it was reputed to be
As per other reviewers, it's still difficult to put it up.
The Exclusive Design and Just Size are not tolerant of mistakes, and even if the center part of the main body can be managed, it is very difficult to put the thin and round surrounding parts in the right position.
Seat was thin and stretched when working with it... I was out of my depth.
View detail
。
the four arithmetical operations (addition, subtraction, multiplication, division) View detail
Quality control or packaging issues
Installation is Level, which is fine for Beginner.
No special problems with the feel of the product.
However, there is a relatively noticeable scratch on the base plate section….
Was the shipping check lax, or was the packaging messy and damaged in transit?
It's not a practical problem, but ….
The mood is lowered by the relatively expensive components.
View detail
Too much shaking bothers me.
The Fender Eliminator is also long, so it swings vertically over bumps and other obstacles.
All those who have seen it for the first time say they are worried about the sturdiness of Large's installation if they look at it from the back.
A friend of mine who bought the same one said he got tired of it and decided to go with a different Manufacturer.
To be honest, I don't really recommend it.
View detail
Fits: Others
For charging smartphones
I put it in for powering my smartphone and a separate ETC. Maybe it is because my motorcycle is old, but DAYTONA products always give me a hard time. View detail
Fits: HONDA APE, HONDA BENLY50, HONDA DAX, HONDA MONKEY, HONDA CT110 HUNTER CUB, HONDA GB250 CLUBMAN, HONDA FTR223, HONDA CL400, HONDA FTR220, YAMAHA SRV250, YAMAHA RENAISSA, YAMAHA BRONCO, YAMAHA TW225, YAMAHA TW200, YAMAHA SR400, YAMAHA SR500, SUZUKI VANVAN, SUZUKI GN125, SUZUKI GS125, SUZUKI VOLTY
Not very good
The paint on some of these has a bumpy texture, like the units weren't clean when the paint was applied. One of them had an electrical short upon installation which was popping my signal fuse. Luckily I had bought a spare. Installaton wasn't a big problem, but I wish they used thicker gauge of wire, it's very thin. Very inexpensive blinkers, but you get what you pay for. I wish I had spent a little more and gotten better quality blinkers. View detail
Like it's no different than OEM Product?
I've compared it to the OEM and it looks identical... View detail