Reviews
5th year
I have been using it for commuting everyday for 5 years.
I changed OIL again the other day without problems.
The Color part is also a very good product without extreme fading.
View detail
Building, quality is good
9. We use it together with 5 mm Nisshin MASTER.
Touch is also good with good quality, but I was worried after installation
I feel that Length is short..
Car make another Exclusive Design (Length) I thought that,
When you float the front wheels during servicing you are stuck Hose.
It is awful when you make Jump - - -. Even though I did not realize it soon (;O;)
Fluid is not included.
View detail
Good at all!
I also installed the necessary parts, so I was able to install it much. Brake looks better and the effectiveness of Brake also got better. The price is also Reasonable and full of affordability. View detail
It's cheap.
Bear hose of STEED bought in second hand probably was attached at the time of purchasing a new car and it changed with aging and Front brake became less effective, so we decided to purchase this item.
I got lost a lot with Stainless mesh and Aluminum mesh, but I made it cheap Aluminum because either way got better.
I think that the color also became one Accent, with SmallParts fancy in a calm atmosphere by choosing Orange for Black.
Next I would like to change Brake lever.
View detail
Attention-oriented
Since Brake had a fluffy feeling, I also tried replacing it as a look.
I could not feel the feeling of Snap after exchange, but I will assume that it is good looking because it is Parenthesis obedience.
I cut off OEMHose's Clamp and OEMHose's RubberSleeve but it seems that it can not be securely fixed with Clamp because the product's Hose is thin except for it.
Blue and Red in the fixed part are good Accent.
View detail
Looking chic feeling
Consider exchange as OEMHose deteriorates
Originally we planned to get everything together with OEM Product
Mesh hose if you want to trade it up !?
Cost performance is also good!
Hose color selects Smoke
It is good feeling to chic without noticeable when trying to install.
View detail
Replace both the front and rear
I switched to Mesh hose after Pad exchange.
OEM's Hose was gripping when grasping Lever, but Mesh is perfect and Brake will work even if you do not grasp as strongly as OEM as OEM.
You can rest assured that Brake can be applied, but which Motorcycle is also a sharp scene may be too careful not to grasp too much?
View detail
Almost 100% satisfied
Following the Rear caliper OH of vmax 1200, so I was about to get tired from OEM soon..
I did not plan to use Race or Pass Gun Gun, etc. I was satisfied with OEM around Brake and I am not interested in expensive things because I do not feel like keeping using Brake hose for ten years, This is good as COSPA I think it is good as an alternative to OEM.
Because I'm not good at shabby colors, if you look closely at Black normally, Mesh, I like the one point position of Gold casually in this car classification I like it.
Crimp Hidden Paching Sleeve also has a cheap writing, certainly it looks like a single item, but if you install it you will not mind anything. Or, vmaxOEM was originally exposed Crimp. Is it worrisome if it is installed in BALIBALI's SS?
Timingly as mentioned above at the same time as OH, because it was a replacement from an OEM with a car age of 10 years, so clearly it is not clear how far this product's performance is, but definitely the feel is steady I think that there is no mistake because it has become.
Aluminum Bolt and Washer may be difficult for those who are not familiar with maintenance, but if it is an ordinary one with knowledge, if it is Copper Washer for iron and Stainless then it is easy to tighten it without thinking so much I think that I think.
View detail
Fits: KAWASAKI ZrX1200ZrX1200 DAEG
Rear Brake Hose
This time, OEM Swingarm replaced OEM's different Swingarm, I removed Hose and replaced Brake hose.
I feel a bit short, but I took it as it got it.
It is better if you can order by Length.
After that it looks good with BlackGold Parenthesis is good.
View detail
Fits: KAWASAKI NINJA1000 (Z1000SX)
Ninja1000ABS
ABSSystem joining part under HandlebarRight, because it hits the rug, I stopped at Bracket
* ABS should never be EngineON until the air removal completely ends. Air circles in ABSSystem If Air enters the ABS
It seems that it can not be fixed by an amateur.
View detail
Fits: KAWASAKI NINJA1000 (Z1000SX)
Because it is ABS, installation is ...
Rear of Ninja 1000 ABS here (Blue Place) I think that it is the most loud strange
I can not do it unless Shock gets in the way and I can not get in my hand and I have to Rose to some extent
Afterwards carefully remove the air.
View detail
No protective Cover
I purchased it with Front and installed it.
For Rear does not have Protective Cover. Is it OK as it is?
I am a bit uneasy, so I'm going to protect it appropriately.
I try to use, but I do not quite understand as well as Front (Lol)
I feel that the Rear brake that worked very hard became feeling like a goo effect.
I think that it is definitely better than OEMHose
View detail
cheap
I tried to arrange the various parts with Jeta ... but I abandoned Brake hose. I chose this cheaply.
OEM's Hose had Protective Cover to the base of Caliper, but this item was only CB 400 T part.
Although it is cheap, it is not a price that you can buy immediately as soon as it breaks, so I'd like to protect it with something.
I try to use it ... I do not really understand (Lol)
Perhaps it may be insensitive, I wonder if it came to come with Snap?.
Rubber hose should be safe in terms of robustness compared to Rubber hose, I think that there is no loss.
It is Kit according to model, but I could install Length without problem.
View detail
Fits: HONDA NSR80, HONDA NSR50
Brake
It was nice and cool in color.
There were only exclusive items and it fit perfectly and it was good
Removing and installing is a little troublesome but the city that changes,
There will. Touch feeling changes at all.
View detail
Fits: KAWASAKI NINJA250R, KAWASAKI Z250 (2013-)
Cospa best!
Since Rear was exchanged before, Front also got it.
Similar to Rear, for exclusive use by car type, although Hose is somewhat long, it will be within the allowable range.
I feel that BrakeTouch has become much better than OEM.
(Maybe Brush)
Tightening of Aluminum Banjo Even thoroughly even Torque, this price at this price is satisfied with Large.
View detail
Fits: HONDA XR50 Motard, HONDA XR100MOTARD
Required enough performance
I do not want to change the appearance so much, so Hose chooses the thing of Black, Nut is a pity that the place of Gold is Gold.
ACPerformance with LogoCover is attached by Cover of Crimp Department but it is a Cover that says that it bothers shoveling just by being fitted in and bothers to say that Cover is botheringly listed.
In terms of performance, braking starts up even with a slight input, and Lever touch improves.
There were also cheap ones in price, but there was no choice of color shade.
13 mm MeterSpanner is required for installation.
Brake fluid and bleeding work are necessary, but if you are not troublesome you can do it yourself. (At your own risk)
View detail
Along with Front.
I wanted to align both front and back with Brake Fee Ring so I replaced it with the same one as Front.
Although it is different by car model, I think that it is somewhat long and it is impossible to handle it. Even if it says it, I think whether there is no problem for practical use even if it is assembled as it is with the Refreshing Level of appearance, but I rearranged it to be Smooth as possible when I rearranged it with Banjo prepared for for Front.
Choose Smoked hose for Plating bolt with color as well as Front.
Like Front, it was unpopular with Impre of others, so Gasket prepared it separately.
Performance as Mesh hose thinks that there is no big difference especially in any product, so if you like the shape etc, this product is cheap price is recommended.
I forgot to write at Front's impression, but since there is no Lineup of Stainless bolt ☆ It's decreasing by 1. As Aluminum is cheaper than other companies 'things, if there is Stainless, it is a premise that it will be less expensive than other companies' things - - -
View detail
Cospa is expensive.
OEM's Rubber hose is outdated, if you are going to exchange it, choose Mesh hose. Compared to the things of other companies cheaply, I was particular about Bolt's shape and I liked the color, so I chose this. Actually I wanted a type of Stainless bolt, but this series has no setting and the other company's products gave up because it was price over budget. Because it seemed like it looked like it, Bolt kind is Plating, Hose color is not too conspicuous, but I select Smoke where you can see Hose inside.
As the function itself as Mesh hose I think that Manufacturer's products will not change as much as Large, so I will mainly write the installation part.
Although it is a product by car model, since I changed my master to R6 thing, I prepared several kinds of banjos for just in case, but the expectation was lost and the angle of the banjo on the left caliper did not match delicately. Since it is not a problem in practical use, it was assembled as it was. Also, the master side banjo is the front fork and God clearance - - - I ordered straightly without thinking deeply, but when I changed master in particular, it seems that it was better for the master side to divide it into two pieces on the way with one in the middle. I think that it is cool that that person is irrelevant regardless of what I think now. Since it is a troublesome part to combine once it is assembled, we recommend that you validate the selection of the angle of the banjo and the hose handling well.
Banjo was with CrimpType, but there was no particular problem.
Sleeve is pretty loose, so I think that it is better to cover up with a thin Tie Wrap. Then Logo can be fixed in any direction and it is two stone with one stone.. I saw that the attached Gasket was not good at other people's impressions, so I prepared for Gasket separately, just in case.
When saying Mesh, there is an image called Yellow-colored Sleeve in Anodized of Red and Blue, but it does not necessarily match the color tone of Body color or Custom parts. I think that the choice of this time was good with chic as you intended. Although not limited to Performance line, those who want casualness recommend Smoke Hose cover, Plating, Stainless Bolt.
View detail
Although it is said to be exclusive for each model - - -
So it's my second purchase..
Compared to several years ago, it seems that Upgrade which adds Protective Tube to middle part of Hose is done.
However, since Fork Protector down to Caliper is exposed as usual, I think that countermeasures are necessary.
In the case of WR 250X, there is contact with Fork Protector and Caliper's Hose guide.
So Rubber hose with an inner diameter of 8 mm and outer diameter of 12 mm was vertically cut and fixed from Hose clamp to Caliper and fixed with Tying Band.
Last time I rolled a Spiral Tube, but I stopped because the contact part had broken off quickly.
View detail
Aluminum Banjo is scared
I bought this item to feel the fee Ring made with Snap of Mesh hose.
For TDR 250 is written, but since Banjo on the MASTER side is Single, VariableTouchBrake must be released.
If you really want to leave the mechanism of VariableTouchBrake you will need to buy Double's Banjo.
good point
Silver's Mesh hose gets colored, but because it's Black, there is no fear of fading.
Cheap price.
Brake's Touch gets much better.
A bad point
It's Aluminum Banjo so I am very scared to shut it down.
important point
Aluminum Banjo is very easy to lick.
It is safe to close with the specified Torque using ClawFoot and Torque wrench for tightening the Socket part.
Socket section adds 13 mm Opening.
Regulation Torque is described in Instruction Manual.
Depending on the type of vehicle, there are models that do not finish air bleed at all, but the return side of MASTER is set to a negative pressure state using Syringe, and by pumping, air will escape at a stretch.
Let's use Fluid new.
Let's wash away places that spilled Fluid with enough water.
View detail