Reviews
If there is even this, it can use even for an outer rotor as well as a pulley clutch. Since the skid of the portion of a band is a little weak, I am rolling and using the rubber tube. It is a gadget whose fine adjustment is also possible.
If there is even this, it can use even for an outer rotor as well as a pulley clutch.
Since the skid of the portion of a band is a little weak, I am rolling and using the rubber tube.
It is a gadget whose fine adjustment is also possible.
View detail
It purchased in order to exchange rear axle shafts. since the price was cheap, there was also an uneasy place, but if it uses, it is reliable at all -- it was . Even if it also compares appearance with the socket of KTC, a result seldom has a diff
It purchased in order to exchange rear axle shafts.
since the price was cheap, there was also an uneasy place, but if it uses, it is reliable at all -- it was .
Even if it also compares appearance with the socket of KTC, a result seldom has a difference, and a price is completely different above all.
The tool here is different although it is said that a cheap article tool is not good.
Since it is quite cheap even if it arranges by a set, I think that it is profitable, and I think that it is also good to arrange the size which it does not have individually.
It is recommended anyhow.
View detail
Although the extension bar had some kinds of things of 100 mm or more, he wanted to only extend only a few this time, and since it was hot, he bought a 50-mm thing also using too long a thing. Although the thing of 50-mm extension in 3/8 size seldom h
Although the extension bar had some kinds of things of 100 mm or more, he wanted to only extend only a few this time, and since it was hot, he bought a 50-mm thing also using too long a thing.
Although the thing of 50-mm extension in 3/8 size seldom had a choice, since it used also at work, TONE was chosen.
Although it is a product which no affectation features, since structure is solid, it can be used in comfort.
Incidentally, although a ratchet handle and a socket are the manufacturers who are different, respectively, they have clung firmly satisfactorily.
View detail
Since an authentic positive one had become dirty, it exchanged. I think that it compares pure, a filter portion becomes large, and it is carrying out UP of some as fitting removes and changes the cowls of a tail by a cinch, but it cannot feel. Sin
Since an authentic positive one had become dirty, it exchanged.
I think that it compares pure, a filter portion becomes large, and it is carrying out UP of some as fitting removes and changes the cowls of a tail by a cinch, but it cannot feel.
Since I feel that only large dirt can be removed since maintenance only drops dirt to a blowing air and I feel that it is somewhat high, it is *3.
View detail
Although attachment was tried by air cleaner use at first, it was too deep, the plug became deep-black, and setting was not completed. It turned out that an air cleaner box is removed after all, the inside diameter of the normal joint part of the plas
Although attachment was tried by air cleaner use at first, it was too deep, the plug became deep-black, and setting was not completed.
It turned out that an air cleaner box is removed after all, the inside diameter of the normal joint part of the plastic of a carburetor and an air cleaner is made very thin, and the air is extracted.
It will adjust by the red funnel specification enclosed, and setting of a jet is taken out with glow color serious consideration, and it is running.
Low rotation torque has quite satisfactory dissatisfaction.
Since the run with the jet at the time of purchase is omitted, the setting is also interested.
View detail
They are necessaries at tanks which rust easily, such as the old vehicle. Before fine rust blocks a carburetor, it uses as preventive measures.
They are necessaries at tanks which rust easily, such as the old vehicle.
Before fine rust blocks a carburetor, it uses as preventive measures.
View detail
It is used even if it changes with VTR250 and the hornet 250. Since both of motorcycles do not have good structure of a helmet holder, they are found useful very much. - - which cannot be removed since the portion of a screw will overlap and they
It is used even if it changes with VTR250 and the hornet 250.
Since both of motorcycles do not have good structure of a helmet holder, they are found useful very much.
- - which cannot be removed since the portion of a screw will overlap and they will not enter a driver at all if those who cannot do maintenance since it can attach easily with one driver also close problem-less - Locke -- uniting with a car body and, since - appearance attached also to the circumference of a handle since it is not large is good,
The above advantages which can adjust thickness with the price and rubber to which it can be convinced are considering making - which does not look to the wind it attached since there was not pure Locke like a padlock.
If there are even the place and thickness to attach, a recommend will be carried out by all means.
Since it would attach to the handle right twist of a hornet and he would like to act to a mirror as Locke now, covering it, a helmet and Locke have been connected by the pure wire lock.
Since a pure holder cannot use its own motorcycle easily, it is not worried, but for some persons, a price may feel it high.
View detail
Ho's site where explanation with a photograph is raised was consulted very much, and it was able to attach exchange of the muffler to the smooth. Probably, there is puzzled work only with an attached operation manual. It became pleasant to run an
Ho's site where explanation with a photograph is raised was consulted very much, and it was able to attach exchange of the muffler to the smooth.
Probably, there is puzzled work only with an attached operation manual.
It became pleasant to run an exhaust sound being heard with the sufficient run center, and feeling sound.
although sound volume is felt slightly large, it is said that the surroundings are better exactly (a baffle -- an owner).
An engine turns to a smooth to a red zone.
I would like to come to raise rotation just.
However, there is breathing at 3000 rpm [ about ] and he has a feeling which smoothness lacked from the time of being a normal muffler.
Appearance and texture are also raised and satisfied.
View detail
Fits: YAMAHA Cygnus X SR, HONDA XR50 Motard, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, SUZUKI VX800, SUZUKI TS200R, SUZUKI TS125R, SUZUKI DR-Z400SM, SUZUKI RMX250S, SUZUKI SV400, SUZUKI GS125, SUZUKI GS125E Katana, SUZUKI RMX250, SUZUKI GSX250S Katana, SUZUKI RG200
It attached to HORNET250. At 11 mm, since the thing of the size had only the short lever type, the pure master chose a 1/2 inch (about 12.7 mm) thing. A little, since size up was carried out, effectiveness of a brake became good. Moreover, it
It attached to HORNET250.
At 11 mm, since the thing of the size had only the short lever type, the pure master chose a 1/2 inch (about 12.7 mm) thing.
A little, since size up was carried out, effectiveness of a brake became good.
Moreover, it does not control and burn and is large satisfaction.
The seen touch is also racy and pleasing.
Since attachment removes an authentic positive one and only attaches it by the same touch, it is easy.
Air-bleeding work is quietly difficult.
Compared with a pure tank, it is easy to put in oil.
Since the color was purchased as it is pure, it was attached comfortable.
View detail
Fits: HONDA CB400SF Revo[NC42] 08-13, HONDA CB400SB Revo [NC42], HONDA CB400SB [NC39], HONDA CB400SF[NC39]
Although it does not change substantially as the catchphrase of a catalogue but a few Changes, if it has ridden, it is easier than a normal position. Since a drilling process etc. are unnecessary, attachment is also easy (although I had you attach in
Although it does not change substantially as the catchphrase of a catalogue but a few Changes, if it has ridden, it is easier than a normal position.
Since a drilling process etc. are unnecessary, attachment is also easy (although I had you attach in D stand, since it was set up according to the vehicle type and processing was also unnecessary, wages were comparatively cheap).
View detail
Although it is somewhat comparatively high-priced as compared with other goods, a color and a result are good and texture is different. The color of a motorcycle is also matched and it is large satisfaction. Attachment is also easy and very foppis
Although it is somewhat comparatively high-priced as compared with other goods, a color and a result are good and texture is different.
The color of a motorcycle is also matched and it is large satisfaction.
Attachment is also easy and very foppish.
View detail
Even if it does not replace by force, this product and = effect show up in a long bolt and color. The fault of this product has the sweet part fixation which a degree of freedom tends to attach greatly, and is merely easy to shift. If it is being
Even if it does not replace by force, this product and = effect show up in a long bolt and color.
The fault of this product has the sweet part fixation which a degree of freedom tends to attach greatly, and is merely easy to shift.
If it is being able to do, and the replacement parts of top bridge fixation are put on the market, I am glad, but since metal fittings are put on the market from green sum, it is a check required.
View detail
It attached to SEROW 250. A specular surface blurs in vibration and visibility is bad depending on speed. I think that a next field of view is securable if there is height to a slight degree. That it is foldable although not reached distantly
It attached to SEROW 250.
A specular surface blurs in vibration and visibility is bad depending on speed.
I think that a next field of view is securable if there is height to a slight degree.
That it is foldable although not reached distantly pure uses only, and the function as a mirror is the greatest advantage.
View detail
The makeover of a clutch wire and change of die length exchanged for the purpose. Since it was longer than normal length 5 cm, when a wheel was turned to the left before, the wire was pulled, but it was lost. Attachment tied up and drew out the st
The makeover of a clutch wire and change of die length exchanged for the purpose.
Since it was longer than normal length 5 cm, when a wheel was turned to the left before, the wire was pulled, but it was lost.
Attachment tied up and drew out the string on the former wire, tied and pulled the string on a new wire, and let the bottom of a tank pass.
It is swift attack.
View detail
Since the cable (original manufacturer's product) attached from the first was being broken, this product was purchased and attached. Then, it will be that what and a motion are smooth! Is it a benefit of this although it seems that the silicon inner i
Since the cable (original manufacturer's product) attached from the first was being broken, this product was purchased and attached.
Then, it will be that what and a motion are smooth! Is it a benefit of this although it seems that the silicon inner is contained in the tube inner side? Anyhow satisfied very much.
Although it does not understand yet about durability, it should last long very much!
View detail
Fits: HONDA Ape 100 Type D, HONDA Ape Type D, HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR Mini, HONDA NSF100, HONDA Ape 100 Type D, HONDA Ape Type D, HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR Mini, HONDA NSF100
Purchase and appearance also become smart for NSF100 and it purchases in preparation for an emergency fall. Providing is preventing.
Purchase and appearance also become smart for NSF100 and it purchases in preparation for an emergency fall.
Providing is preventing.
View detail
It purchases for a dress-up up. When attaching to a main part, it is useless if an exhaust pipe is not removed. If right-hand side is attached and it tries to let left-hand side components pass in a bolt, a hole does not suit. It became a form
It purchases for a dress-up up.
When attaching to a main part, it is useless if an exhaust pipe is not removed.
If right-hand side is attached and it tries to let left-hand side components pass in a bolt, a hole does not suit.
It became a form inserted in forcibly.
It is individually satisfactory although it was time and effort a little.
View detail
I think that they have some cushion effect if it rides on dirt and the measure against degradation although purchased and equipped. How to attach can be easily attached, if a front is put previously first, pulling to back after it.
I think that they have some cushion effect if it rides on dirt and the measure against degradation although purchased and equipped.
How to attach can be easily attached, if a front is put previously first, pulling to back after it.
View detail
Since it had dropped out while the pure reflector ran, it purchased here. The form of a reflector also thinks that it was compact and the circumference of rear one became light shapely. I think that it is an angle exactly good for the vehicles of
Since it had dropped out while the pure reflector ran, it purchased here.
The form of a reflector also thinks that it was compact and the circumference of rear one became light shapely.
I think that it is an angle exactly good for the vehicles of a fender less.
If their own vehicles have an angle enriched more since they are not fenderless, they will be saved.
View detail
It attached to kawasaki KSR110 normal handle. Since the value stretched a few when united with the fitting kit, even the star was dropped, but since a shield and the accuracy of each part article are high, and it can fix with dust and the protection-a
It attached to kawasaki KSR110 normal handle.
Since the value stretched a few when united with the fitting kit, even the star was dropped, but since a shield and the accuracy of each part article are high, and it can fix with dust and the protection-against-wind effect is also high, it is recommended.
As for the clear of this highway shield, the lower part is Black and appearance is also GOOD.
View detail