Reviews
Since clear blinker SET is a clear lens + amber ball, otherwise, it is not necessary to add to its purchase only by exchanging. An orange ball will disappear from outside and the direction which has a margin in money will think that it is good, if an
Since clear blinker SET is a clear lens + amber ball, otherwise, it is not necessary to add to its purchase only by exchanging.
An orange ball will disappear from outside and the direction which has a margin in money will think that it is good, if an amber ball is made into a mimic valve aside from SET.
I painted the clear blinker by smoked spray from the rear face, made it the smoked inker, and attached.
Since attachment was useless when a front cowl was not removed, troublesome one is perfect as the quality of the greatest minus point kana ? book products, and what problem does not have it, either, and it has attached it.
View detail
The packing which occurs between a meter gear, a meter gear, and a hub bearing from a pure hub is transplanted. If this packing is not more shallowly inserted in a hub, garbage is likely to go into the direction of a gear. He put in quite more sha
The packing which occurs between a meter gear, a meter gear, and a hub bearing from a pure hub is transplanted.
If this packing is not more shallowly inserted in a hub, garbage is likely to go into the direction of a gear.
He put in quite more shallowly.
The accuracy has improved.
All screws are attached.
In the case of the Faulk appropriation of NSR, he does not forget preparation of the axle shaft of NSR in the case of the Faulk appropriation of NSR.
View detail
[Buying motive] He bought a net with large capacity a little for - camping touring. The [feature] etc. Since the - features were written on the package in detail, I attach a photograph. [grading of goods] - it used and the sub hook for a net bundl
[Buying motive] He bought a net with large capacity a little for - camping touring.
The [feature] etc. Since the - features were written on the package in detail, I attach a photograph.
[grading of goods] - it used and the sub hook for a net bundle lump was dramatically convenient.
They are four stars.
View detail
Since the District Land Transport Bureau carefully made bolts were uncool, it used for fixation of the number plate. Texture is also recommended so so highly. Although he does not use, the direction which had die length to a slight degree as a net
Since the District Land Transport Bureau carefully made bolts were uncool, it used for fixation of the number plate.
Texture is also recommended so so highly.
Although he does not use, the direction which had die length to a slight degree as a net anchor thinks that it is easy to hang a net.
Or [ that it is better to prepare an M6x30~35mm cap bolt since the charge of a nut may be shallow depending on an after vehicle type if it is an attached bolt (M6x25mm) ].
View detail
Fits: YAMAHA GRANDAXIS [Grand Axis]., YAMAHA GRANDAXIS [Grand Axis].
On a good point reinforcement target, I think that it is perfect. about a bad point, especially nothing clasp, there is a ratio pure -- it is likely to be. I would like to take out setting with various clasps.
On a good point reinforcement target, I think that it is perfect.
about a bad point, especially nothing clasp, there is a ratio pure -- it is likely to be.
I would like to take out setting with various clasps.
View detail
Fits: YAMAHA BWS [Bewith] 100, YAMAHA GRANDAXIS [Grand Axis]., YAMAHA BWS [Bewith] 100, YAMAHA GRANDAXIS [Grand Axis].
Although it has several kinds, an acknowledged chameleon factory is chosen. A size with good point width and exactly sufficient die length. Or [ that it is a chameleon factory too if it unites with the present specification ] -- a bad point -- esp
Although it has several kinds, an acknowledged chameleon factory is chosen.
A size with good point width and exactly sufficient die length.
Or [ that it is a chameleon factory too if it unites with the present specification ] -- a bad point -- especially, nothing
View detail
Fits: YAMAHA Grand Axis, YAMAHA Grand Axis, YAMAHA Grand Axis, YAMAHA Grand Axis, YAMAHA Grand Axis, YAMAHA Grand Axis
since the weight roller pulley clutch outer was exchanged, it used, but the strengthening belt of a daytona is unnecessary at such reconstruction -- it was . Although there was only a too high thing and sense of security was high, another thing is use
since the weight roller pulley clutch outer was exchanged, it used, but the strengthening belt of a daytona is unnecessary at such reconstruction -- it was .
Although there was only a too high thing and sense of security was high, another thing is used now.
It may be exactly at the vehicles which horsepower, such as a chamber, are going up.
View detail
Two were purchased to the oirufirutakabas of SR400. Although some texture is inferior compared with other high-class bolts, the part price is eye Yasu. . Since the plug part of a wrench is shallower, the touch which is easy to lick carries out
Two were purchased to the oirufirutakabas of SR400.
Although some texture is inferior compared with other high-class bolts, the part price is eye Yasu.
.
Since the plug part of a wrench is shallower, the touch which is easy to lick carries out the point to worry.
View detail
It was used for the position. Since the incandescent lamp in color was also fairly expensive, it was exchanged for LED. Although it is not so much conspicuous daytime, it shines quite gaily at night.
It was used for the position.
Since the incandescent lamp in color was also fairly expensive, it was exchanged for LED.
Although it is not so much conspicuous daytime, it shines quite gaily at night.
View detail
A cotter pin is a split pin. I am using the use part here of a big split pin for the axle shaft of a rear side. As it is in a picture, it is not suitable for re-use in the split pin used once. For example, Tyre exchange. In the case of a m
A cotter pin is a split pin.
I am using the use part here of a big split pin for the axle shaft of a rear side.
As it is in a picture, it is not suitable for re-use in the split pin used once.
For example, Tyre exchange.
In the case of a motorcycle, the Tyre wear of RIA is more remarkable than a front.
When exchanging rear Tyre, the axle shaft of a rear side is desorbed.
There is a nut which ties the axle shaft of this rear side.
This nut loosens and it is using the split pin for a stop.
The size of the split pin in W650 is set to 4.0x35.
Split pin exchange is carried out also except the Tyre exchange.
It will loosen the nut of the axle shaft of a rear side in the case of chain adjustment.
A split pin will be naturally pulled out in that case.
A split pin is pulled out, a nut is loosened, a rear wheel is moved back, and the tension of a chain is adjusted.
These acts are only performed and two split pins are used.
Also when carrying out chain exchange, of course, split pins may be exchanged and you are exchanged at the time of a great car wash.
even if it is alike and uses any, although one set of sale is carried out by ten, I will completely have the product here and it will describe to the sentence end that it is not set sale by a superfluous number.
Just small components support sense of security also like Rider's feelings also for a motorcycle.
It is like [ if a simile is carried out, however highly efficient Tyre will be worn, but ] un-equipping a wheel with an air valve cap.
Also in order [ which you search for ] to have you play a role safe, having small components made differs in the sense of stability of a feeling.
As for the cotter pin of an original manufacturer's product, although it is iron, it made from a kitaco is a product made from a stainless strong against corrosion harder than iron.
recommendation goods -- rather than -- the goods which should be bought are just accessories of a cotter pin or a beta pin -- ~!!
View detail
Nanda? The true character of the metal body of the shape of KO of 4 mm of board thickness is a center stand stopper attached to the muffler made from a nojima for W650. Since this object is a raw material with magnetism, it becomes a raw material
Nanda?
The true character of the metal body of the shape of KO of 4 mm of board thickness is a center stand stopper attached to the muffler made from a nojima for W650.
Since this object is a raw material with magnetism, it becomes a raw material of a steel system.
Moreover, one cap bolt (M10 x 50 P=1.25) with a common bolt enclosed by the muffler made from a nojima is attached.
It was stated by the instruction manual of the nojima that a nut diverts an authentic positive one.
(1): About Center Stand Stopper, it is Polishing at Stain Magic made from Yoshimura!!
First, polish for about 15 minutes will be carried out on the 1st, opening an aperture wide, carrying out a mask and latex gloves, relaxing to a sofa in a well-ventilated environment, and watching a tv!!
Polish for several days from the order placement to Webike to arrival.
It became BIKABIKA that there is nothing incompletely!! (2) : The aluminum spacer collar for M10 made from a kitaco (phi16mm H = 3 mm) is passed, and it is conversion to the compact flange bolt made from beta titanium (TIHC-10055-B)!!
The appearance which the fascinating blue to which anodizing was performed reflects in the center stand stopper which became BIKABIKA is glad!! (3) : When pure, the nut for center stands is concluded with the lock nut.
We applied the screw lock agent and concluded in the compact flange nut made from beta titanium.
This compact flange nut is an excellent piece to the extent that it is surprised!! It groaned.
.
.
Beta titanium.
It is true!! Compact flange nut of M10 P=1.25.
A flange outside diameter is phi16mm.
A hexagon-head diagonal is 12 mm.
The height of a compact flange nut is 10 mm.
Miniaturization of a fearful like.
Therefore, the weight saving design of a fearful like.
Preeminent for accuracy!! Preeminent for appearance!! Preeminent for maintenance nature!! Feeling also becomes invigorating that there is nothing incompletely!! Postscript: In Webike,
When beta titanium products come to hand Since the sticker of beta TITANIUM was enclosed, the sticker was stuck on the center stand.
All the intentions are the performance more than satisfactory!! Webike was got to know and the possibility of customization increased.
I borrow this place and am thankful to Webike.
Thank you Webike!!
View detail
It was used for the center stand stopper conclusion attached to the muffler made from a nojima for W650. (1): About Center Stand Stopper, it is Polishing at Stain Magic made from Yoshimura!! (2) : Compact Flange Bolt made from Beta Titanium (TIHC-1005
It was used for the center stand stopper conclusion attached to the muffler made from a nojima for W650.
(1): About Center Stand Stopper, it is Polishing at Stain Magic made from Yoshimura!! (2) : Compact Flange Bolt made from Beta Titanium (TIHC-10055-B),
Conversion through the aluminum spacer made from a kitaco (M10 and phi16 mm-H=3mm)!! (3) : When pure, the nut for center stands is concluded with the lock nut.
We applied the screw lock agent and did conclusion by the compact flange nut made from beta titanium.
I say why the bolt of M10x55 was replaced through the aluminum spacer made from a kitaco to the center stand stopper attached to the full exhaust for W650 made from a nojima.
It is for making flush (TSURAICHI) the bearing surface which a bolt and a center stand stopper touch.
Since the bolt bottom did not touch a center stand stopper uniformly even if it inserts M10 v in a direct, the aluminum spacer was used as a washer.
Therefore, bolt length was made longer 5 mm than the thing attached to a nojima muffler.
For details, I think whether it can judge by a picture.
Equalization of sidewall is a promise of bolt conclusion.
A normal function is not obtained, either, if a bolt and a nut do not obtain a flat-surface bearing surface by Kami who ties a certain individual.
The individual which equalization of the bearing surface has not accomplished requires a spacer or a washer.
If language is added to a picture.
.
.
The flange outside diameter of a titanium bolt is 16 mm.
The outside diameter of an aluminum spacer is 16 mm.
The outside diameter of a titanium flange nut is 16 mm.
With the above-mentioned parts, normal conclusion of the center stand stopper made from a nojima is attained.
All the intentions are the performance more than satisfactory!! Webike was got to know and the possibility of customization increased.
I borrow this place and am thankful to Webike.
Thank you Webike!!
View detail
for the first time -- it is -- since appearance of the price was well handy although it wavered, it made into this which muffler to make it. It is good touch. Attachment can be done simply and the baffle is not attached. The highest sound is p
for the first time -- it is -- since appearance of the price was well handy although it wavered, it made into this which muffler to make it.
It is good touch.
Attachment can be done simply and the baffle is not attached.
The highest sound is played.
Appearance and sound are satisfied at the best.
This price thinks now that it is quite handy.
They are what he will think that he will purchase a muffler for the first time, and it will make it, and the direction and recommendation which are wavering.
View detail
It attached on the next day when goods arrived. It was about 15 minutes until it removed the normal muffler about attachment, but a pipe did not go into sticking a new muffler easily, and it has taken time. By the time attachment finished, it took
It attached on the next day when goods arrived.
It was about 15 minutes until it removed the normal muffler about attachment, but a pipe did not go into sticking a new muffler easily, and it has taken time.
By the time attachment finished, it took about about 1 hour.
Or [ that it is last-minute in idling in the residential street although it is after starting the engine ] ..
Although there may also be an unsatisfactory person, I am satisfactory enough.
It is the feeling which the exhaust which seldom heard also about the run at the time of a normal muffler could come to be heard, and Power also went up for a while.
I thought whether for it to have been cheap and to have been recommended as a muffler of one flat knot.
View detail
It purchased to the dress-up of the circumference of a handle up. (Silver) Texture is also dramatically good and pleased with the shaving character of XJR. Attachment is also easy and recommended.
It purchased to the dress-up of the circumference of a handle up.
(Silver) Texture is also dramatically good and pleased with the shaving character of XJR.
Attachment is also easy and recommended.
View detail
Since former bar end was plating, atmosphere was changed and ... and titanium were chosen, but it was yellowish unexpectedly. Although he thought in anticipation that it was a thing like chrome silver, it is a very well different thing. Since it s
Since former bar end was plating, atmosphere was changed and ... and titanium were chosen, but it was yellowish unexpectedly.
Although he thought in anticipation that it was a thing like chrome silver, it is a very well different thing.
Since it seemed that structure was solid, evaluation was set to 4.
View detail
Although it is a factory FX grip doughnut, a design is also good, a price is also reasonable and they are one point items which have practicality, such as MAME prevention, and yet.
Although it is a factory FX grip doughnut, a design is also good, a price is also reasonable and they are one point items which have practicality, such as MAME prevention, and yet. View detail
Fits: HARLEY-DAVIDSON FLHT Electraglide, HARLEY-DAVIDSON FLHTC Electra Glide Classic, HARLEY-DAVIDSON FLTCU Tour Glide, HARLEY-DAVIDSON FLHTCU Ultra Classic Electraglide, HARLEY-DAVIDSON FLHRI Road King, HARLEY-DAVIDSON FLTR Road Glide, HARLEY-DAVIDSON FXST Standard, HARLEY-DAVIDSON FXSTB Night Train, HARLEY-DAVIDSON FLSTC Heritage Classic, HARLEY-DAVIDSON FXSTC Softail Custom, HARLEY-DAVIDSON FXSTS Softail Springer, HARLEY-DAVIDSON FLSTF Fatboy, HARLEY-DAVIDSON FLSTN Heritage Nostalgia, HARLEY-DAVIDSON FXSTSB Bad Boy, HARLEY-DAVIDSON FLSTS Heritage Springer, HARLEY-DAVIDSON FXSTD Deuce, HARLEY-DAVIDSON FXCW Locker, HARLEY-DAVIDSON FXCWC Rocker C, HARLEY-DAVIDSON FLSTSB Crossbones, HARLEY-DAVIDSON FLS Softail Slim
SUPOSUTA XL1200S was equipped. The hand was small, and at the time of touring, although the second half was in the quite hard situation, it has been improved considerably. Since a price is also handy compared with a misumi etc., it is recommended
SUPOSUTA XL1200S was equipped.
The hand was small, and at the time of touring, although the second half was in the quite hard situation, it has been improved considerably.
Since a price is also handy compared with a misumi etc., it is recommended in the direction ! a few also wants to improve the fatigue of a hand for the time being.
View detail
Before, when having ridden on the bandit 1200S, it had equipped. Since there was no money, it had equipped with buffing by private paint application. Attachment of attachment was completed also for itself comparatively simply [ those days ]. [ who
Before, when having ridden on the bandit 1200S, it had equipped.
Since there was no money, it had equipped with buffing by private paint application.
Attachment of attachment was completed also for itself comparatively simply [ those days ]. [ who was still a maintenance beginner ]
Although it is the effect ... Because it is made of aluminum, he is worried by reinforcement.
It stands and enters inside also in a GOKE grade.
honest -- (?) -- since it will fall, or it becomes and it enters inside -- the exchange only for 1 time (repair) -- it is necessary to carry out
Although surely the engine circumference is protected, considering cost and durability, it is the honesty ?.
Although charm is light to be sure, I think that it is not speaking if the reinforcement of a protector is low.
If it asks for robustness and defense nature and will search for an authentic positive one for lightness, we will recommend you to use a slider and the skid pad.
Although there may also be wearing in respect of looks exceptionally .... It is if a direction with a sub frame is good in that case?
View detail
Fits: KAWASAKI BALIUSI, KAWASAKI XANTHUS, KAWASAKI ZEPHYR400 χ, KAWASAKI ZXR750, KAWASAKI ZXR250, KAWASAKI ZXR400, KAWASAKI ZX-7RR, KAWASAKI ZRX400, KAWASAKI ZX-7R, KAWASAKI , KAWASAKI , KAWASAKI Zephyr χ, KAWASAKI ZRX400, KAWASAKI ZX-7R, KAWASAKI ZX-7RR, KAWASAKI ZXR250, KAWASAKI ZXR400, KAWASAKI ZXR750, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Varios I
Since attachment was bolt on, it went to the smooth. Since practicality is not using the stand after attaching these parts, it is unknown, but I think that it is good for the dress-up of the circumference of rear one up.
Since attachment was bolt on, it went to the smooth.
Since practicality is not using the stand after attaching these parts, it is unknown, but I think that it is good for the dress-up of the circumference of rear one up.
View detail