Reviews
I will recommend it..
When installing, it is necessary to remove Side cover and Blinker etc. once, but it can be installed easily with just labor. I am recommended because it is well-fitted and Cost performance is also good.. View detail
Early! Cheap! Easy!
Remove NORMAL while reading Papapa Instruction Manual, Complete installation on papapa.
It was over in a short time.
There is no Bracket attached to Reflector, so it is necessary to prepare separately if with Reflector.
Because NORMAL is quite heavy, I refreshed it.
I think that it is also possible to attach Helmet holder and pole stands after a bit of remodeling.
View detail
Cospa Good!
We are on the S1000RR of MODEL 2016. Since I mentioned 2012, I thought that it might not be attached ... but it came with Exactly.
It was the cheapest S1000RR Fender lessKit I was looking for, but I am satisfied with my firmness.
Not only this Fender lessKit, but also those who want to port NumberHolder of bmw at the same time, it is considerably difficult to remove Number Holder unless there are thin Pliers etc.. As I saw in the third photo, I took it about 3 hours using the slotted screwdriver and I could do it off.
I'm not complaining about this product, but I think that one who is bought should pay attention to the following points.
- Angle of Number is constant and can not be adjusted to my favorite angle.
- A bit heavy
Is it a lol?
If you do not stick to the angle it will be cool enough by this ^ ^
View detail
Firm, design is also good!
Even without attaching License Plate Holder, it can be attached without processing. It looks SMART, I thought that it fits this Motorcycle well. Wiring was saved because 2-pole Coupler was also included. Installation is easy. View detail
It is Cool.
I wanted to make the circumference around Rear so I exchanged it.
Image changes quite a bit after replacement.
I think mud bounding is equivalent, but I do not mind because I do not ride on a rainy day.
View detail
Fits: YAMAHA Bolt CSpecifications, YAMAHA Bolt, YAMAHA Bolt
Installation is completed.
I could easily install it even with amateur myself. But electric Wiring had a different color, so it took a while. Others was a product without complaint. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Refreshing with Favorites
It is still light with Aluminum's point as it is a thick Stay Easy to install The LED's License Plate Light is also solid and Wiring can be installed without any difficulties. It is my favorite. View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
Attached to CB 400 SF
As OEM deteriorated and it became White っ ぽ い, I made it to the Simple HURRICANE Fender Eliminator Kit in searching various things.
Working time can be worn in about 1 hour.
(You can do it in a short time if Screw leaves early)
There was no particularly difficult part of work, so even an amateur can wear it.
I thought that it was okay to pick Made by HURRICANE as exterior with Refreshing after installation.
There is no Reflector, so do not forget to buy Large things.
View detail
Fits: KAWASAKI ER-6n, KAWASAKI NINJA400 (2014-), KAWASAKI Ninja 650
Pannier case bracket measures
When purchasing NINJA 650, I attached the Pannier case I was longing to, but I actually found out that I never used it (Seat bag is sufficient). However, when the Pannier case is removed, a large bracket will remain as shown on the photo Left. Meanwhile, a mechanic of a shop that is indebted, Bracket for Pannier case had to wear it while adjusting variously, so it was said that it can not be easily returned to the end at the last if removed.
As a result of considering whether it can be replaced by the necessary minimum Small limit, the Fender Eliminator Kit of this product on the photo Right (Reflector is Beg MODE : By using the Reflector Kit Slim, cheap!), We could replace it with Pannier bracket secretly as shown in the picture Right so that it was as clear as under Right.
The problem is that it takes about an hour to replace (Tandem bar replacement, Wiring replacement, Number change) is.
View detail
Fender Eliminator
I found a place I was looking for Fender Eliminator Kit because STORETFIGHTER does not match the uncrowded Fender. We purchased inexpensive things with HURRICANE and famous Manufacturer too. Easy to install and License Plate Light attached with Extra Processing Not Required in about 1 hour. it's recommended.
View detail
Blinker's position is good.
Compared to products of other companies Blinker is in a high position,
I did not hesitate from the affordable price
"Number base & Reflector W 122" It is use together with.
I think this Fender Eliminator KIT looks good on CBR 650 F.
I think the LED is a little too bright.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI NINJA1000 (Z1000SX)
It may be cheap anyhow.Work was completed in about 1 hour only depending on how to remove the Fender investigated in a description and a Net also for attachment.Since the LED section also serves as an exclusive Connector, there is also no necessity for wi
It may be cheap anyhow.Work was completed in about 1 hour only depending on how to remove the Fender investigated in a description and a Net also for attachment.Since the LED section also serves as an exclusive Connector, there is also no necessity for wiring processing. View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI NINJA1000 (Z1000SX)
Although the Manufacturer besides wearing was inquiring to Ninja1000, this product excellent in the Cost performance was used. Processing in particular is also unnecessary and it is the completion of wearing at a Bolt on. The Number light of LE
Although the Manufacturer besides wearing
was inquiring to Ninja1000, this product excellent in the Cost performance was used.
Processing in particular is also unnecessary and it is the completion of wearing at a Bolt on.
The Number light of LED is good touch.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
What also has a form where a price is also reasonable and it is simple was looked for. The License lamp is also attached and an enclosed description is also polite. Structure is splendid although I think that a Number may have an angle to a slight degre
What also has a form where a price is also reasonable and it is simple was looked for. The License lamp is also attached and an enclosed description is also polite. Structure is splendid although I think that a Number may have an angle to a slight degree. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Nice Design! In the minimum component constitution, they are a Simple and a functional Parts. All parts required for attachment are also attached, and it can attach very easily. Especially the place that the power cord for the Number light
Nice Design!
In the minimum component constitution, they are a Simple and a functional Parts.
All parts required for
attachment are also attached, and it can attach very easily.
Especially the place that the power cord for the Number lights of LED can exchange from a Coupler especially without processing wiring by the side of vehicles was good.
View detail
very nice quality product, fitted very easily and quickly! stainless steel is mirror like and strong and lines up perfectly to existing holes
very nice quality product, fitted very easily and quickly! stainless steel is mirror like and strong and lines up perfectly to existing holes View detail