Reviews
Fits: YAMAHA sulfur oxide (SO, SO2, etc.), YAMAHA SR400, YAMAHA SR500
[webike Monitor] It purchased for formation of Separate handle. Since it went out and an angle was lost more than it considered, it Removes only with a Fitting, the board of an Aluminum is processed, and the Handle was kept from hitting
[webike Monitor] It purchased for formation of
Separate handle.
Since it went out and an angle was lost more than it considered, it
Removes only with a Fitting, the board of an Aluminum is processed, and the Handle was kept from hitting a Tank.
I did not have necessity, even if it used the Separate handle.
Since it goes out truly and an angle is lost, when you use it on a public road, please
Take care and operate.
View detail
[Webike Monitor] This product was purchased in order to equip with the Side bag. I think that it is appropriate and I will fully be able to use as quality even if it sees from a price. , however this product cannot be attached when the pu
[Webike Monitor] This product was purchased in order to equip with the
Side bag.
I think that it is appropriate and I will fully be able to use as
quality even if it sees from a price.
, however this product cannot be attached when the pure Carrier is attached.
Although tried repeatedly, the Stay of a pure Carrier interferes and the mounting hole of a Back support does not come to a fixed position.
It is replied that the attachment equipped with a pure Carrier is not checked when you think whether to be my skill shortage and Mr. KIJIMA is asked.
The direction which purchases this product generally should also have many directions which consider and purchase loading of a Motorcycle in addition to fashionability.
If it becomes, even if it has attached the pure Carrier, it is sold or I regard the product with which it can equip as notes of being unable to perform simultaneous wearing with a pure Carrier being required.
Since the Design and the function are pleasing as
products, I would like to extend a Stay, or to process and attach a mounting hole.
As
evaluation, I will carry out critical evaluation.
I think that evaluation differs from me for the direction which is not equipped with
pure Carrier.
Because it is a good article as a product.
View detail
Fits: HONDA MONKEY
"I purchased it as it corresponds to LED and attached to LED-ized DAX, it blinked for the time being, but it was an afterglow state faintly at the time of putting out lights... When the relay corresponding to LED of another manufacturer on hand was attac
"I purchased it as it corresponds to LED and attached to LED-ized DAX, it blinked for the time being, but it was an afterglow state faintly at the time of putting out lights... When the relay corresponding to LED of another manufacturer on hand was attached without a method, it blinked normally and the afterglow state at the time of putting out lights was also nothing! It seems that leakage current is probably flowing into the base of this relay. Although DAX correspondence was not written in the instruction though it says Monkey correspondence, it is embarrassment that it cannot use for the same engine. Therefore, evaluation is one star severely..." View detail
When attached for the time being, the cut of the spline by the side of a kick was coarse, and it did not suit with the engine side spline and did not enter smoothly. Since it was unavoidable, a spline was united to some extent and equipped by a rubber ha
When attached for the time being, the cut of the spline by the side of a kick was coarse, and it did not suit with the engine side spline and did not enter smoothly. Since it was unavoidable, a spline was united to some extent and equipped by a rubber hammer. The pedal position of the kick did not become a right angle to the car doby this time and leaning to the front side about 20 degrees when a kick was opened in order to kick, since it was attached somehow... For the time being, I could kick and step on, but I had a sense of incongruity. I'm thinking to replace to the rusty kick attached before. Therefore, evaluation is one star severely. View detail
![[IDEAL] Shift Spindle Holder](https://global.webike-cdn.net/photo/article/77/1331260982477L.jpg)
Although it is this product that heard the information that a Shift touch became brave and purchased it, a Shift becomes difficult to enter not to mention change of whether whose how to attach me was bad, a thing with bad how to ride, and a Shift feeling
Although it is this product that heard the information that a Shift touch became brave and purchased it, a Shift becomes difficult to enter not to mention change of whether whose how to attach me was bad, a thing with bad how to ride, and a Shift feeling is not felt.
Incidentally the state where it equipped with the Back step made from a MORIWAKI was equipped with this product.
There may also be affinity with a Back step.
The Position of the
Back step was the rearmost top.
It is regrettable that
appearance was not able to exhibit the function as expected only in beautiful goods.
It may be congenial if it is a Back step of the company.
If restricted in the case of me, it became such evaluation though it was regrettable.
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
The quality of the product is very good, however fit is not the best. It does not line up with the existing fairing for the section which runs along the bottom of the tail light (you can see gap in the picture). This can be made better by placing addition
The quality of the product is very good, however fit is not the best. It does not line up with the existing fairing for the section which runs along the bottom of the tail light (you can see gap in the picture). This can be made better by placing additional washers under the rear spaces which are provided with the kit, but still not the perfect alignment. better off buying factory standard fender for $30 and mofifying that in my opinion. I would have expected better for the $150 paid. View detail
6 mm was purchased for muffler exchange of a bandit 1200. After having purchased since it was cheap and KTC, but not understanding with a photograph but arriving, he noticed, but by fixation, there is GATA and it is very worrisome so that connection o
6 mm was purchased for muffler exchange of a bandit 1200.
After having purchased since it was cheap and KTC, but not understanding with a photograph but arriving, he noticed, but by fixation, there is GATA and it is very worrisome so that connection of a hex and a socket may be a bolt.
In Cau Ken, famous HAZETTO, and PB of a par rank belt, I think that there is no such thing.
a KTC tool -- Cau Ken -- it is alike, it compares and structure is not quite satisfactory at the same price zone.
It is regrettable.
View detail
Fits: SUZUKI GSX1300R HAYABUSA, SUZUKI GSX-S1000ABS, SUZUKI GSX-S1000F ABS, SUZUKI SV650X ABS, SUZUKI SV650ABS, SUZUKI BOULEVARD400, SUZUKI GEMMA
what is being treated by HOMUSEN (Joyfull O -- new) was torn -- a sake -- having purchased -- although -- HOMUSEN -- having bought it -- a thing -- the direction lasted long. I think that the influence by a wind was great since it was what does not ha
what is being treated by HOMUSEN (Joyfull O -- new) was torn -- a sake -- having purchased -- although -- HOMUSEN -- having bought it -- a thing -- the direction lasted long.
I think that the influence by a wind was great since it was what does not have a belt in a center.
(with the outdoors and no roof) The direction of outdoor parking recommends you a type with a belt in the middle.
View detail
Fits: HONDA Byte, HONDA ZOOMER, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO
Since it was good touch when it was purchased and used for the yamahas JOG before, it was purchased and tried to use it for honda zoomers this time but, and probably because the engine itself was powerless, the not much good physical feeling was not made.
Since it was good touch when it was purchased and used for the yamahas JOG before, it was purchased and tried to use it for honda zoomers this time but, and probably because the engine itself was powerless, the not much good physical feeling was not made.
The acceleration feeling could also be weak at the touch which only rotation goes up, and most speedup could not be found.
Since fuel consumption only worsened, it returned to normal.
View detail
Although the snap ring pliers of KTC were used until now also, since the tip had shifted delicately by a fixed type, a claw purchases this product. When changed into the claw curved 90 degrees, the tip had shifted about 2 mm. It is not speaking.
Although the snap ring pliers of KTC were used until now also, since the tip had shifted delicately by a fixed type, a claw purchases this product.
When changed into the claw curved 90 degrees, the tip had shifted about 2 mm.
It is not speaking.
View detail
When pulling out a wire, it cannot pull out round and round like video. In order not to escape from the upper key which cannot be canceled although the key was put in in order it will act as Locke for the first time and to cancel. It threw away.
When pulling out a wire, it cannot pull out round and round like video.
In order not to escape from the upper key which cannot be canceled although the key was put in in order it will act as Locke for the first time and to cancel.
It threw away.
They were inferior goods.
View detail
It comes with 2 missing bolts and the finishing inside is not smooth so be careful as it is prone to leak. For the price I can't say it worth the money.
It comes with 2 missing bolts and the finishing inside is not smooth so be careful as it is prone to leak. For the price I can't say it worth the money. View detail
Fits: Others MODIFY, Others CR-I, Others CR-II, Others CR-IV
I think that it is very good to be lowered simply. However, the state where it lowered covers impending, and in the state where it is running exactly, unless a boundary line lowers a face in the neighborhood of a rearview mirror, it does not look good
I think that it is very good to be lowered simply.
However, the state where it lowered covers impending, and in the state where it is running exactly, unless a boundary line lowers a face in the neighborhood of a rearview mirror, it does not look good.
If it and light are received, irregular reflection will be carried out and the rainbow-colored flare ? will come on all sides.
It is standard, since the rainbow mirror which followed is removed for summer, it cannot evaluate, but if it can cover to lower to a slight degree anyway, I will think very good kana.
I think that it is different fairly if it falls by 1 more cm.
I think whether even if it will not put in a dent so that a nose may be avoided for a center portion if it says more and uses a straight, do not become a problem, and the cover range spreads and a few becomes better.
As [ become / although taking up and down was heavy at first, while using / light ] .. It is becoming more honest and more honest that the location which falls in right and left had shifted.
Instead of the sunglasses of a winter season, although instead of [ of the windscreen (goggles) of summer ] was thought and being purchased, the role is considered to be the kana given sure enough.
light smoke + (inner) smoke standard in winter, and summer -- the smoke + (inner) -- the standard rainbow mirror is used.
View detail
Fits: HONDA LEAD125, HONDA DIO110, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125
The Kitaco springs are physically smaller size than stock standard ones in the Pcx already,when you installed them they are stretched where as the stock ones are not. My rpm clutch engagement dropped down by 200rpm. Not a good product....
The Kitaco springs are physically smaller size than stock standard ones in the Pcx already,when you installed them they are stretched where as the stock ones are not. My rpm clutch engagement dropped down by 200rpm. Not a good product.... View detail
Fits: HONDA LEAD125, HONDA DIO110, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125
Not a good product, physically smaller than original Honda spring when fitted already stretched and will drop your rpm clutch engagement by 200rpm. Not a good product...
Not a good product, physically smaller than original Honda spring when fitted already stretched and will drop your rpm clutch engagement by 200rpm. Not a good product... View detail
Fits: KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750
If it restricts to the viewpoint of conformity, it will be below brand-name parts. We cannot recommend you at all. A photograph is in the state which grasped the clutch. A portion without the screw thread at the tip of a mouthpiece is long, an
If it restricts to the viewpoint of conformity, it will be below brand-name parts.
We cannot recommend you at all.
A photograph is in the state which grasped the clutch.
A portion without the screw thread at the tip of a mouthpiece is long, and the dust cover of a rubber becomes narrow touch (it removed).
Moreover, a mouthpiece is long, and Tyco and since it is near, a folding angle will be attached to a wire.
The nylon of the circumference of Tyco has jumped out in the place run about 50 km after exchange.
Details are careless considering the elegance only for a vehicle type.
Since it is not quite satisfactory, it will exchange for brand-name parts.
View detail
purchasing to reserving, since it is compact -- the time of sudden rain -- Coco -- about -- although it was used, since it was dangerous although wearing on a magic tape was in heavy rain, it being loose, being caught in a shift and separating, he removed
purchasing to reserving, since it is compact -- the time of sudden rain -- Coco -- about -- although it was used, since it was dangerous although wearing on a magic tape was in heavy rain, it being loose, being caught in a shift and separating, he removed.
It does not use since then.
Since the cover or the like learned by experience, it purchased waterproof shoes.
View detail
Although it yearned after the carbon design and being purchased, it will curve like a squid after wearing in several days, and has separated from the surroundings. Before sticking, it was useless although he thought that it stuck on the beauty firmly
Although it yearned after the carbon design and being purchased, it will curve like a squid after wearing in several days, and has separated from the surroundings.
Before sticking, it was useless although he thought that it stuck on the beauty firmly with slight warmth with the dryer as the oil film.
it is a seal -- since it was comparatively expensive, it was regrettable.
Although it may exhaust, I would like you to do one's best in an adhesive part a little longer.
View detail
He thought whether for a portion with few standups which go to a storage part from a battery box to have the crack ?, and to have worried with whether the goods will be returned to the badness of structure of too much goods, when it took out from a box fi
He thought whether for a portion with few standups which go to a storage part from a battery box to have the crack ?, and to have worried with whether the goods will be returned to the badness of structure of too much goods, when it took out from a box first, but to hide, if it attaches, and it attached as it is.
There is no reinforcement to the extent that it will say whether to break into two equal parts from middle, if it does not take care until it carries out temporary attachment to a car body.
Although what is necessary is just to attach ...
The screw which it is as in play [ ? ] and processing (gap of a hole) is required if it cannot attach by beginners by one monochrome copy, and stops a regulator is not attached, and an instruction manual is to a home center in the middle of work.
The circumference of rear one can feel the style after wearing very refreshed, it can also adjust the angle of a number free, and becomes a race ish.
It is a one star, although a future improvement is expected and it may be severe criticism.
View detail
The description (corresponding to un-[ gasoline ]) to the goods which actually arrived although gasoline correspondence is written and being purchased... Since product number suits, is it the written mistake in a net? I would like you to correct immediate
The description (corresponding to un-[ gasoline ]) to the goods which actually arrived although gasoline correspondence is written and being purchased... Since product number suits, is it the written mistake in a net? I would like you to correct immediately.
.
View detail