Reviews
Since high-voltage current flows, a price stretches. Since it is necessaries when attaching the main part of a ballast to a rear side, it has given up. I want you to also carry out cheap structure somehow or other. Probably, it will be OK alth
Since high-voltage current flows, a price stretches.
Since it is necessaries when attaching the main part of a ballast to a rear side, it has given up.
I want you to also carry out cheap structure somehow or other.
Probably, it will be OK although uneasiness remains in heat resistance.
I think that it is very good to carry out the option according to die length.
View detail
Fits: YAMAHA TW200E, YAMAHA TW225E, YAMAHA SR500, YAMAHA SR400
A design is simple, and although a parenthesis is good, the lamp under run of daytime is hard to see. Only for the red of a high beam, it is that it can check. It can use satisfactorily at night.
A design is simple, and although a parenthesis is good, the lamp under run of daytime is hard to see.
Only for the red of a high beam, it is that it can check.
It can use satisfactorily at night.
View detail
Correspondence vehicle type KAWASAKI : The zephyr was equipped in the combination of the swage line pro ZEPHYR750 radial brake master cylinder and by piece type. First of all, since the master cylinder of normal was a premise, the brake hose set had l
Correspondence vehicle type KAWASAKI : The zephyr was equipped in the combination of the swage line pro ZEPHYR750 radial brake master cylinder and by piece type.
First of all, since the master cylinder of normal was a premise, the brake hose set had last-minute hose length.
Then, if a margin is securable for a hose as it is if hose length is somewhat extended with this product (about 20 mm) was considered, and it purchased.
Though it was regrettable, the result interfered in the tank and wearing of it (there is an about 2-mm crevice correctly) was not completed.
It came out and has attached the extension hose of the other company when it comes to the actual condition.
if there is a margin of this about also here although the crevice between it and a tank is about 10 mm ~ 20 mm, cautions are somewhat required, but I think that it is satisfactory.
Those who consider the same combination by a zephyr as a conclusion on which money has been spent as it is recommend you to act as an order maid of the hose.
I think that in the case of honesty and I he was probably able to buy the order maid's hose if the same expense was spent when beginning since it is changing with L character banjo and the extension hose of the other company and parts cost and wages had started, respectively with the set.
For your information, since the hose length of a set is 750 mm, it thinks that it is good exactly at about 800 mm.
View detail
Correspondence vehicle type KAWASAKI : Since it was standard to ZEPHYR750ZEPHYR1100 and ZEPHYRchi and was attached to them, if it matches well somehow was thought and how much effects there are by practical use purchased by appearance as another. Alth
Correspondence vehicle type KAWASAKI : Since it was standard to ZEPHYR750ZEPHYR1100 and ZEPHYRchi and was attached to them, if it matches well somehow was thought and how much effects there are by practical use purchased by appearance as another.
Although a cable tie is used for attachment, about this, I think that the pros and cons are divided.
If it sees from a distant view, it hardly understands, but when it often sees nearby, it is conspicuous, and also since it was a little cheap, we cannot not much recommend you the direction of appearance serious consideration.
After all, although I had stuck for a while, it was not pleasing too and I removed.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr 1100
Correspondence vehicle type KAWASAKI : Since the height of ZEPHYR750 handle does not change, naturally the purpose is appearance. However, since form differs from an under bracket, I think that there is also individual difference, but appearance has g
Correspondence vehicle type KAWASAKI : Since the height of ZEPHYR750 handle does not change, naturally the purpose is appearance.
However, since form differs from an under bracket, I think that there is also individual difference, but appearance has got rather bad.
Therefore, though it was regrettable, it rechanged for the product of the other company.
View detail
![Billet Side Stand/Series [Long Type]](https://img.webike-cdn.net/catalogue/images/2341/74_0073_image-1_TS.jpg)
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
Pigeon thought purchase was carried out from the iron castings of normal. Although the product level was good, it was not able to be used where a center stand is attached. Since the replace from normal was considered, I wanted you to specify that
Pigeon thought purchase was carried out from the iron castings of normal.
Although the product level was good, it was not able to be used where a center stand is attached.
Since the replace from normal was considered, I wanted you to specify that combined use with a center stand is improper.
View detail
It was worrisome from before, and although there was also a means of direct buying from overseas, it was wavering. When net wandering was carried out casually, it sold by Mr. Webike, and since the price was quite cheap from before, I purchased. Al
It was worrisome from before, and although there was also a means of direct buying from overseas, it was wavering.
When net wandering was carried out casually, it sold by Mr. Webike, and since the price was quite cheap from before, I purchased.
Although anyone could do when the mounting arrangement had some knowledge, but it was indicated to construction explanation that a wiring extraction location was not from a meter flesh side but from CPU, although it speaks about the time lag of a display of a gear position well, a meaning after ??? goods of this sort,
Since it is a region of a toy to put it bluntly, please do not expect.
As compared with a friend's thing before bought directly from overseas, the display of the crystalline liquid became markedly legible.
View detail
He wanted to change a blinker and it purchased. It was felt farther than normal small refreshed. Merely ... A screw-thread portion is missing at the time of attachment, and the fixing position has become short a little. Structure is somewhat s
He wanted to change a blinker and it purchased.
It was felt farther than normal small refreshed.
Merely ... A screw-thread portion is missing at the time of attachment, and the fixing position has become short a little.
Structure is somewhat sorry for it to be crude on the whole not only a screw-thread portion but.
View detail
It was felt refreshed after an appearance paddle blinker peculiar to XR exchanging. It is serious for drilling to be required or to connect an electric wire etc., and also considers Wright's light, and I depended for it, and it was allowed to make int
It was felt refreshed after an appearance paddle blinker peculiar to XR exchanging.
It is serious for drilling to be required or to connect an electric wire etc., and also considers Wright's light, and I depended for it, and it was allowed to make into a two stars darkly attachment it became quite good [ appearance ] parenthesizing from the point.
View detail
A blinker change is made and it purchases as a measure against a high flasher. Attachment changes blink speed in engineon/off of a simple thing. Although it blinks at a moderate speed, by engineon, 96 times, with a part for /, it is early at the t
A blinker change is made and it purchases as a measure against a high flasher.
Attachment changes blink speed in engineon/off of a simple thing.
Although it blinks at a moderate speed, by engineon, 96 times, with a part for /, it is early at the time of engineoff, and it blinks.
It is a two stars in saying.
(Whether a variable speed thing is purchased and under examination)
View detail
wiring is too short although it is attachment -- it is . A line must be connected on the way and must be carried out. Although it is operation, the gear ratio of a Fifth-gear Sixth gear is near, and it takes time. Regrettably we cannot not muc
wiring is too short although it is attachment -- it is .
A line must be connected on the way and must be carried out.
Although it is operation, the gear ratio of a Fifth-gear Sixth gear is near, and it takes time.
Regrettably we cannot not much recommend you.
We recommend you the indicator of GIpro DS.
Since wiring is a coupler on type for a long time, it is dramatically easy.
View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 50, HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 50
It attached together with the oil shower head of the company. Since the nipple of an 8-mm hose is high at M10, I think with a hose that this price is cheap. However, the die length of a hose is lacking even to the oil catch tank which I have attac
It attached together with the oil shower head of the company.
Since the nipple of an 8-mm hose is high at M10, I think with a hose that this price is cheap.
However, the die length of a hose is lacking even to the oil catch tank which I have attached, and I will consider it as this evaluation.
Moreover, I would like you to use a 6-mm hose by M8 safely.
View detail
Fits: YAMAHA Apprio, YAMAHA Super Jog Z, YAMAHA Super Jog ZR, YAMAHA Apprio, YAMAHA Super Jog Z, YAMAHA Super Jog ZR
Decrease is also early so that width may be somewhat large. A weight display may be intelligible.
Decrease is also early so that width may be somewhat large.
A weight display may be intelligible.
View detail
Although it is in other impression, since it will flow backwards if it pours in continuously, it is necessary to pour in gradually. Since it still flows backwards somewhat from the wire side, if something closes the wire side (it gathers with a finger
Although it is in other impression, since it will flow backwards if it pours in continuously, it is necessary to pour in gradually.
Since it still flows backwards somewhat from the wire side, if something closes the wire side (it gathers with a finger or is a knob with previous thin pliers) and it is poured in, it is in good condition.
Although there was an attached adapters for phi1 metallic nozzles (product made of resin), an inside diameter was not able to insert the metallic nozzle of phi 1 at all small.
The tube of the inside diameter phi 1 was purchased and used in the home center.
It was in good condition.
If there is nothing well, it will be troubled, but user-friendliness is unsatisfactory.
View detail
SV1000 was equipped. Since it is a form similar to the root of the pure blinker, this LED blinker (ST173) comes exactly. As it is, it is buried in a cowl and I think that it is necessary from the front to carry out the kiln of the spacer etc. sinc
SV1000 was equipped.
Since it is a form similar to the root of the pure blinker, this LED blinker (ST173) comes exactly.
As it is, it is buried in a cowl and I think that it is necessary from the front to carry out the kiln of the spacer etc. since blink cannot be seen at all.
In addition, since the pedestal twisted off and carried out is all a plastic, suddenly, I put in power too much and have broken it (although bitter smile appearance is the highest, it is a fairly regrettable result here.).
View detail
It attached to the HARDY MX handle type II. Since it was a general-purpose type, anticipation was carried out, but attachment is not fitted nicely. The lever was cut short, however the angle of a guard and a handle might adjust, it did not suit, b
It attached to the HARDY MX handle type II.
Since it was a general-purpose type, anticipation was carried out, but attachment is not fitted nicely.
The lever was cut short, however the angle of a guard and a handle might adjust, it did not suit, but since the brake & clutch lever asked the guard, with the sledge hammer, it struck in bubbles and attached, but considerable unreasonableness has started the bolt of the bar end portion, and the bolt is actually bent and attached.
Although appearance is also good for a direction with time to process components and a tool and it is recommended, as this price, I feel not much that it is not high for C/P.
View detail
w which is looking for MONO which there is [ MONO ] no die length not much and a mirror wants to be conspicuous, and arrived at the mirror of cod roe -- although the mirror stopped surely being conspicuous, visual field nature is quite bad -- peevish [ co
w which is looking for MONO which there is [ MONO ] no die length not much and a mirror wants to be conspicuous, and arrived at the mirror of cod roe -- although the mirror stopped surely being conspicuous, visual field nature is quite bad -- peevish [ come out and ] ...
if a mirror is seen with a run, back can hardly be seen by vibration -- This (sweat) ... (sweat) it is the touch the mirror is attached for the time being (smile) -- it is -- since, although a recommend cannot be carried out to the direction which thinks visual field nature as important,
In the direction which a mirror wants to be conspicuous from visual field nature like me, it is a recommend.
View detail
Though it was regrettable, a size did not suit a super sherpa. (It is slightly long) Although still attached, a gripping feeling (smile) is the touch which may be solid. It is merely somewhat thin. But a price is cheap and unavoidable. I t
Though it was regrettable, a size did not suit a super sherpa.
(It is slightly long) Although still attached, a gripping feeling (smile) is the touch which may be solid.
It is merely somewhat thin.
But a price is cheap and unavoidable.
I think that I will use a little in between.
Should a size suit to recommend!!!
View detail
![Front Fork Boots]](https://global.webike-cdn.net/photo/article/26/1241194018426L.jpg)
It attached to SR400. From attachment, although a photograph is a thing for eight months, it is transforming the part now. Is it related although it is a pure softer raw material? Boots do not fit Faulk again as a photograph. The boots are mor
It attached to SR400.
From attachment, although a photograph is a thing for eight months, it is transforming the part now.
Is it related although it is a pure softer raw material? Boots do not fit Faulk again as a photograph.
The boots are more delicately [ than an outer tube ] larger, and the level difference is made.
Although fixation is an attached cable tie, it is not awesome as a photograph.
It is not the metal in an article image but a product made from a plastic.
There are few stages of bellows more thickly pure.
Quality is ? although it is cheap.
View detail
It chose only in the style. Appearance is rather good. However, attachment somewhat requires a device. Since a sheet front is worn with a tank, it has made and floated stay. Otherwise, will paint application of a tank come off immediately?
It chose only in the style.
Appearance is rather good.
However, attachment somewhat requires a device.
Since a sheet front is worn with a tank, it has made and floated stay.
Otherwise, will paint application of a tank come off immediately?
Degree of comfort? The hips are painful.
Since it is G craft, he expected to a slight degree and has bought it.
Although the parenthesis became good, aren't they two stars in cost effectiveness?
View detail