Reviews
Fits: YAMAHA Axis, YAMAHA JOG Zr, YAMAHA TZR50, YAMAHA TZM50, YAMAHA TW200, YAMAHA SR500, YAMAHA SR400, YAMAHA RZ125, YAMAHA RZ50, YAMAHA SDR, YAMAHA RD50, YAMAHA GT50, YAMAHA GT80, YAMAHA JOG, KAWASAKI KS-2, KAWASAKI KS-1, HONDA LIVE DIOZX, KAWASAKI 750SS, HONDA FUSION, HONDA FREEWAY
Idling is stable
[How is it used?
TZr250RS (3XV) The Idling of the Ignition coil was not very stable and the Piston ring was replaced.
Both OEM Parts and Uotani are expensive, but I was worried about the quality of Chinese products, so I chose this product.
Was the one you received as per Image?
It is quite Orange Body and Plug cord as shown in the picture.
The mounting bracket is only held in place by a screw and can be removed quickly.
Was the installation difficult?
Simply take the Mounting Hardware and replace it with the attached Ignition coil.
A plug cap is also required separately, but I used the NGK plug cap that was originally included.
The Right Side is just the right length for the cord, and the Left Side is too long as it is, so we cut it.
How was your experience with it?
Idling has stabilized considerably, although I have only been using it for a short time.
Both low and high RPMs have been used without problems.
I am satisfied with the resolution of the ailing area.
[Included Parts:were they on?
Plug cap is not included and must be purchased separately if needed.
And, of course, Quantity:1pc., so in 3XV, Quantity:2pc. Set purchase is required.
[Was there anything that disappointed you?
As others have mentioned, the Waterproof Cap is loose and the Ignition coil terminals are bare. (OEMs, too.) So Waterproofness is doubtful.
【Review】
Unstable Idling is now stable and comfortable.
It is a consumable item, and the price is not that high, so there is no harm in replacing it if you do not feel comfortable with the current situation.
View detail
Fits: YAMAHA Remote control jog, YAMAHA Grand Axis, YAMAHA JOG 50, YAMAHA Jog 90, YAMAHA Axis 90, YAMAHA Axis 50, YAMAHA Super Jog ZR, YAMAHA Jog Aprio Type 2, YAMAHA JOG 50, YAMAHA Jog 90, YAMAHA Axis 90, YAMAHA Axis 50, YAMAHA Super Jog ZR, YAMAHA Jog Aprio Type 2
จานดิส สวยงาม คุณภาพดี View detail
Fits: YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Cygnus X, YAMAHA BWS125 (Bewith), YAMAHA Remote control jog, YAMAHA BWS125 (Bewith), YAMAHA Grand Axis, YAMAHA Apprio, YAMAHA Axis 90, YAMAHA SMAX, YAMAHA Majesty S, YAMAHA Majesty 125, YAMAHA vino, YAMAHA Super Jog Z, YAMAHA Jog ZII, YAMAHA BWS100 (Bewith), YAMAHA Jog 90, YAMAHA Grand Axis, YAMAHA Apprio, YAMAHA Axis 90
น้อตสวยงาม คุณภาพดีเยี่ยมยอด View detail
Fits: HONDA ZOOMER(Ruckus), HONDA APE 100, HONDA APE 50, HONDA GORILLA, HONDA GORILLA, HONDA JOKER90, HONDA JOKER Helmet, HONDA ZOOK, HONDA solo, HONDA DREAM50, HONDA Byte, HONDA MONKEY BAJA, HONDA MONKEY, SUZUKI ADDRESS V100, YAMAHA BWS100(BWS), YAMAHA AXIS 90, YAMAHA APRIO, YAMAHA APRIO, YAMAHA GRAND AXIS, YAMAHA JOG (2Cycle)
ไฟท้ายสีแดงสวยงามใช้งานได้ดี View detail
Fits: KAWASAKI KSR-I, KAWASAKI KSR-II, KAWASAKI KS-II, KAWASAKI KSR-110, KAWASAKI Z125PRO, SUZUKI LETS II-S, SUZUKI SEPIA ZZ, SUZUKI SEPIA RS, SUZUKI ShotS, SUZUKI Address Tune, SUZUKI AddressVTune, SUZUKI ADDRESS V50, SUZUKI Address50, SUZUKI ZZ, SUZUKI HI-UPR, SUZUKI GAG, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS110, SUZUKI ADDRESS110
It is said that the size is just right for a grom. If you don`t put a top case on it
I bought the M Size after reading the impressions that it was just right for the Grom, but I had forgotten about the Top case.
It is not impossible to use it, but I regret that I should have chosen a Large size.
I think the quality is good
View detail
Fits: YAMAHA Zr SUPER JOG (SUPER JOG), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA TW200E, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA Town mate 80 (TOWN MATE), YAMAHA Town mate 80 (TOWN MATE), YAMAHA Town mate (TOWN MATE), YAMAHA Town mate (TOWN MATE), YAMAHA Town mate (TOWN MATE), YAMAHA SR125, YAMAHA SR125, YAMAHA SEROW XT225 (SEROW), YAMAHA SEROW XT225 (SEROW), YAMAHA RZ50, YAMAHA RZ50, YAMAHA Mate/Mate DELUXE (MATE/MATEDELUXE)
Purchased for Yamaha Bobby50
I bought this for Restore for my Yamaha Bobby50.
It has not been driven yet, but it was installed without any problems.
View detail
Fits: APRILIA GULLIVER50, APRILIA RALLY(AIRCOOL), APRILIA SCARABEO50, DERBI Antorcha・Coppa・Diablo, DERBI FDS・GTS・RD-2, DERBI GranPrix74, DERBI Hunter(D+A), DERBI Olimpica・Savanah・Start, DERBI Sport・Variant・Yumbo, DUCATI 1000MHRmille/S2mille, DUCATI 350XL PANTAH, DUCATI 500SL PANTAH, DUCATI 600SL PANTAH, DUCATI 600TL, DUCATI 650SL PANTAH, DUCATI 750SS IMOLA, DUCATI 750SS, DUCATI 750SS, DUCATI 900MHR, DUCATI 900S2
Powerful and reliable iridium spark plug
I'm afraid it's due to our lack of knowledge...
Upon arrival, I installed it without doing anything and it became an Engine malfunction.
I took it to a Motorcycle shop to have it checked out.
I was told that I need to include Oil in the internal Filter.
I would have liked to see an instruction manual or reminder paper included if possible!
View detail
Fits: HONDA CB125R, HONDA CB223S, HONDA CB250F, HONDA PCX125, HONDA PCX150, HONDA VTR-F, YAMAHA Helmet in JOG, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW225, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA GRAND AXIS, YAMAHA AXIS 90, YAMAHA XT250X, YAMAHA WR250, YAMAHA TW200, YAMAHA TW225, YAMAHA JOG90
Recommendation to dress-up around Handlebar
[How is it used?
Installed on a PCX125JF56. the brake master cylinder cap had deteriorated considerably and was very dirty, so I decided to buy this product which can dress-up the cap.
Was the one you received as per Image?
I am very satisfied with the product, the texture and appearance are better than I expected.
Was the installation difficult?
It's easy, just remove the OEM brake master cylinder cap and put it in the same position. I used the supplied bolt to secure it in place.
How was your experience with it?
I am glad I changed it because it is a One Point around the Handlebar and the Tension goes up every time I drive. It is a little Custom, but I think the quality is very good for this price.
[Included Parts:were they on?
It contains an attached fixing Bolt.
The OEM bolt can be removed with a Phillips screwdriver, but I think the supplied special bolt is hexagonal.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA BWS(BWS), YAMAHA BWS(BWS), YAMAHA JOG (both FI Vehicles), YAMAHA VINO, YAMAHA VINO(2Cycle), YAMAHA VINO(2Cycle), YAMAHA Box, YAMAHA Old JOG (27V|48F|1HHH|1KX|1RN), YAMAHA Old JOG system (2EX|2TA|2TE|2JA|3CP), YAMAHA BJ, YAMAHA JOG-EX, YAMAHA AXIS 50, YAMAHA AXIS 90, YAMAHA APRIO, YAMAHA GEAR, YAMAHA GEAR, YAMAHA JOG, YAMAHA JOG (2Cycle), YAMAHA JOG 80, YAMAHA JOG90
VINOsa-26j
I installed it in VINOsa-26j07.
The Scooter was given to me by a friend, but it was very dirty and the engine was not running.
After removing the six screws from the case, clean the inside of the case, remove the primary and clean it with an air gun, add NORMAL 5g and Weight Roller Grease, and insert the roller in the correct direction for installation! (Some say that Scooter now does not apply Grease to the Weight Roller.)
Primary tightened with 30Nm. (If it is over-tightened, the KRAN will be ruined, and if it is not tight enough, it will come off while driving.)
Also, don't forget the direction of travel for Belt!
View detail
Fits: YAMAHA JOG90, YAMAHA JOG90, YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA GRAND AXIS, YAMAHA GRAND AXIS, YAMAHA AXIS 90, YAMAHA AXIS 90, YAMAHA BWS(BWS)
ท่อ kn ใส่ yamaha ใครไม่ชอบเสียงดังจัดไปครับ View detail
Fits: KAWASAKI KSR-I, KAWASAKI KSR-II, KAWASAKI KS-II, KAWASAKI KSR-110, KAWASAKI Z125PRO, SUZUKI LETS II-S, SUZUKI SEPIA ZZ, SUZUKI SEPIA RS, SUZUKI ShotS, SUZUKI Address Tune, SUZUKI AddressVTune, SUZUKI ADDRESS V50, SUZUKI Address50, SUZUKI ZZ, SUZUKI HI-UPR, SUZUKI GAG, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS110, SUZUKI ADDRESS110
Large satisfied
It is quite solidly made and I am satisfied with Large!
Just size for Z125PRO as well.
Heat Insulating Material that can be affixed to the Exhaust System portion and
Don't let it flap in the wind.
I also like that it comes with a Belt!
View detail
Fits: YAMAHA Jog 90, YAMAHA Axis 90, YAMAHA Jog 90, YAMAHA Axis 90
life prolonged
1994 CYGNUS XC125T The car has traveled 28,000 km.
While commuting to work, the engine suddenly started spinning out of control, and I thought the belt had snapped, but upon closer inspection, I found that the splined part of the wheel had been shaved off.
I was thinking it was time to part ways with Spline, but this hub has the same diameter as a fraction of Spline, and I thought it might work, so I ordered it.
I ordered wheels for the GYRO, thinking they would work, and although some modification was required, they were able to run. Tires only fit 110/60R12, DURO only.
View detail
Fits: SUZUKI birdie, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA Cygnus, YAMAHA Cygnus, HONDA APE 50, HONDA GORILLA, HONDA SUPER CUB 50 (AA04), KAWASAKI KDX125/SR, KAWASAKI KDX250SR, SUZUKI LETSG, SUZUKI LETS4, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI ADDRESS V100
bulb-out replacement
I was looking for a product that was out of bulbs and the same etc. as the installed product, found this one and purchased it.
The price is reasonable and I hope it has some longevity.
Brightness and other aspects of the Level are fine for normal use.
View detail
![AluminumBillet master cylinder cap[DCR]Type-3](https://img.webike-cdn.net/catalogue/images/105539/09080243_5f56715ce9ca3_TS.jpg)
Fits: HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA glom, HONDA FORZA250, HONDA CB125R, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA FTR223, HONDA CB223S, HONDA CBR250R, HONDA CB250F, HONDA CBR250RR, HONDA VTR, HONDA VTR-F, HONDA CBR400R, HONDA CB400F, HONDA 400X, HONDA FAZE
"cool
Cool, but the O-ring is thick and deforms when tightened.
Oil oozes, although it is not clear if that is the reason or not.
View detail
![AluminumBillet master cylinder cap[DCR]Type-3](https://img.webike-cdn.net/catalogue/images/105539/09080249_5f5672ab55afa_TS.jpg)
Fits: HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA glom, HONDA FORZA250, HONDA CB125R, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA FTR223, HONDA CB223S, HONDA CBR250R, HONDA CB250F, HONDA CBR250RR, HONDA VTR, HONDA VTR-F, HONDA CBR400R, HONDA CB400F, HONDA 400X, HONDA FAZE
I like the colored GuardCover.
Install the diaphragm so that it does not bite, but this is not particularly difficult. Since the installation is changed from a cross screw to a hexagonal screw, be sure to install with the proper torque so as not to overtighten.
I was a little concerned about the fact that it says "Made in Taiwan" and "Parenthesis" on the lid.
I have been using it for over a month now and have had no problems with it.
View detail
Fits: YAMAHA JOG, YAMAHA JOG50, YAMAHA JOG90, YAMAHA GRAND AXIS, YAMAHA BWS100, YAMAHA APRIO, YAMAHA AXIS 50, YAMAHA AXIS 90, YAMAHA SUPER JOG, YAMAHA SUPER JOG ZR, YAMAHA Vertical TypeJOG80, YAMAHA REMOTE CONTROLLER/JOG , SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G
ตอนนี้ได้รับแล้ว รอไม่นานถือว่าไวมากๆ สั่งมาหลายรอบแล้ว สินค้าตรงตามสั่งทุกครั้ง ไม่เคยมีชิ้นไหนชำรุด หรือ เสียหาย ของมีคุณภาพ ทั้งหมดเป็นของแท้ 100% ราคาถูกกว่าที่อื่นเยอะเลย โดยรวมถูกใจมากๆ เดี๋ยวสั่งของเรื่อยๆๆแน่นอนครับ ถูกใจและพอใจมากๆ View detail
Fits: YAMAHA GRAND AXIS, YAMAHA GEAR, YAMAHA Active, YAMAHA RS100, YAMAHA NMAX155, YAMAHA NMAX125, YAMAHA BW'S50, YAMAHA CUXI, YAMAHA FORCE, YAMAHA BW'S100, YAMAHA BJ, YAMAHA GTR, YAMAHA BW'S125, YAMAHA JOG Aprio, YAMAHA Axis 50, YAMAHA Axis 90, YAMAHA Axis Z, YAMAHA Axis Street, YAMAHA Grand Majesty 250, YAMAHA Grand Majesty 400
good quality
My motorcycle is YAMAHA NMAX155. The gearbox port screw of this car is plastic, which will crack after a long time and cause the gear oil to leak out. I bought this KN Planning gearbox oil drain screw on webike. It is Aluminum CNC anodized surface, durable and will not be corroded. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. The gearbox screw of this car is plastic. After a long time, it will crack the gear oil. The aluminum CNC anode oxidation surface, strong durability will not be corroded. Powered by Google Translator View detail
Fits: YAMAHA JOG, YAMAHA JOGZ, YAMAHA JOG, YAMAHA AXIS90, YAMAHA JOG90, YAMAHA AXIS, YAMAHA JOG
It's a quintessential KN product that can be pimped out!
The OEM Product is expensive, so I was looking for one and found this product from KN. (Cheapness) I wanted them to do their best. View detail
Fits: KAWASAKI KSR-I, KAWASAKI KS-I, KAWASAKI KSR-II, KAWASAKI KS-II, KAWASAKI KSR-110, KAWASAKI Z125PRO, SUZUKI LETS II-S, SUZUKI SEPIA ZZ, SUZUKI SEPIA RS, SUZUKI ShotS, SUZUKI Address Tune, SUZUKI ADDRESS V50, SUZUKI AddressVTune, SUZUKI GAG, SUZUKI HI-UPR, SUZUKI ZZ, SUZUKI Address50, SUZUKI ADDRESS V100, SUZUKI ADDRESS110, SUZUKI ADDRESS V100
Even with the Rear Carrier attached, it's almost wrapped around.
The Exhaust System heat-resistant cloth was peeled off as if the glue had floated off due to exposure to rain, but it is still usable without any problems.
I can't hide it under the Wheel, but I'm sure it wouldn't be a problem with the Rear box on?
View detail