Reviews
Fits: HONDA CBR125R, YAMAHA MAJESTYS, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA dunk, HONDA FORZA Si, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA PCX150, HONDA glom, HONDA PCX HYBRID, HONDA PCX150, HONDA PCX150, HONDA CBR250R, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA CBR250R
Convenient for hanging a small shopping bag or Helmet.
I purchased Red.
I installed this on my pcx 125 jk05. I like the fact that the limited space around the handlebar is not sacrificed since it is tightened to the master cylinder and does not require any extra mounts.
It is solidly built and has a good texture.
As it is called a "Convenient Hook," it can be used with no problem if it is just a small bag of groceries at Convenience.
Bags purchased in SUPER large quantities can also be hung, but please note that the foot space will be cramped.
It is also convenient to hook the D Ring of the Helmet during Small breaks.
I think it is such a Must-have item that Scooter should make it a Standard Equipment.
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
When set to full power, it becomes very warm, and when winter comes, it will be active in Large!
When set to full power, it becomes very warm, and when winter comes, it will be active in Large!
The installation went without any difficulty.
View detail
Fits: KAWASAKI Z1000J1, KAWASAKI Z1000J2, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE+, KAWASAKI Ninja H2 CARBON, KAWASAKI Ninja H2, KAWASAKI Ninja H2 SE, KAWASAKI ZEPHYR1100 RS, KAWASAKI 1000GTR, KAWASAKI GPZ1000RX, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100 II, KAWASAKI ZZR1100(C)(ZX-11), KAWASAKI ZZR1100(D)(ZX-11), KAWASAKI ZEPHYR1100
On hot days
When there is no covered parking in the scorching sun!
It is a perfect product!
Very good product! Very easy to install! Very easy to install!
View detail
Fits: KAWASAKI ELIMINATOR 250V, KAWASAKI EN400 TWIN, KAWASAKI ELIMINATOR 750, KAWASAKI ELIMINATOR 900, KAWASAKI 1400GTR, KAWASAKI 1400GTR, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI XF650 FREEWIND, SUZUKI DL650 V-STROM XT, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI V-STROM1000, SUZUKI V-STROM1000
On the SR400.
I use it on my SR400 which I changed to Handlebar Up Type, I chose Large size because I didn't want the tire to stick out.
I took measurements before purchasing, so I was satisfied with the Large size.
As stated in the description, it is not Completely Waterproof.
That is not the issue, as what I am looking for is protection from degradation due to UV light.
The Belt that goes around the body of the car is also a pain to handle, but it has withstood strong winds.
View detail
Fits: SUZUKI GSX-R1100 (GU74A), SUZUKI GSX-R1100 (GV73A), HONDA CBR250RR (MC22), HONDA CBR250R (1-light vehicle MC41), HONDA CBR125R (JC50), HONDA CB750 (RC42), HONDA CB650F (RC83), HONDA CB400SS (NC41), HONDA CB400X (NC47), HONDA CB400SF (NC42), HONDA CB400F (NC36), HONDA CB400F (NC47), HONDA CB400SF (NC39), HONDA CB250F (MC43), HONDA CB1300SF (SC54), HONDA CB1300SF (SC40), HONDA CB1000SF (SC30), HONDA 400X (NC47), HONDA CB1000R (SC60), SUZUKI GSX-S1000 (GT79B)
Finally, it was not available.
I took the time to disassemble the Light area to remove the exterior, but Material:The Rubber Waterproof Cover could not be attached and I gave up on installing it.
It was a waste of time, effort and Gold.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA BROSProduct1, HONDA BROSProduct2, HONDA CB-1, HONDA CB-1 TYPEII, HONDA CB1000R, HONDA CB1000R, HONDA CB1000SF, HONDA CB1000T2, HONDA CB1100, HONDA CB1100SE, HONDA CB1100EX, HONDA CB1100BLACKSTYLE, HONDA CB1100RS, HONDA CB1100E Package, HONDA CB1100RS Final Edition, HONDA CB1100EX Final Edition, HONDA CB1300 SUPER TOURING, HONDA CB1300SF
I will use it next time!
I did not use the Filter this time because I just replaced the Oil and did the Filter next time. The quality seems to be good, so I will try it next time and may continue to use it in the future. The most important thing is the cost performance. View detail
![[MORIWAKI x K&P Engineering] Micronic Oil Filter S1](https://img.webike-cdn.net/catalogue/images/95133/01541-20250-G0_01_TS.jpg)
Fits: HONDA 400X, HONDA AfrIca TwIn, HONDA BROS I (NT650), HONDA BROS II(NT400), HONDA CB-1, HONDA CB-1 II, HONDA CB1000R, HONDA CB1000SF, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300DC X-4, HONDA CB1300SF, HONDA CB1300SB, HONDA CB400F, HONDA CB400Four, HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Easy to see the effect when installed at the same time as Oil replacement
Purchased for the claimed Power and Torque up.
This one has not been effective so far.
What I realized most after the installation and oil replacement at the same time was the improvement in operability.
The familiar doldrums that occur at low speeds are considerably reduced.
The acceleration startup became more straightforward, but this may be due to the Oil.
I would like to continue to monitor the condition closely, but it seems like a change that cannot be noticed unless you ride with an eye on the quality of your driving.
The quality of the product itself is very good and it looks great as a color accent for your feet.
However, it is expensive, or rather too expensive, as a Cost to Filter.
O Ring is required for each replacement, so you need to prepare S1-compatible Rings each time you use a spare 1 pc.
It is for people who want to try various things on their Motorcycle rather than cosmetics.
The same product is available even without this MORIWAKI collaboration, and while it is possible to make a recommendation in terms of self-sufficiency, it depends on the person whether it is necessary or not.
View detail
Fits: HONDA CB400SF, HONDA CB400SB, YAMAHA TMAX, YAMAHA XVS250, YAMAHA XMAX250, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VIRAGO1100, YAMAHA VMAX, YAMAHA MAJESTY250, YAMAHA SR500, YAMAHA TW 200E, YAMAHA TW 200, SUZUKI V-STROM 650, SUZUKI SV650
If you feel up to it, why not give it a try?
OEM Product has deteriorated somewhat and was replaced.
It is really just a fashionable color. It has nothing to do with driving performance.
However, I think it is also important to pay attention to such details as a hobby.
View detail
Fits: SUZUKI ST250, YAMAHA MAJESTY SV, YAMAHA TW200, YAMAHA TW225, HONDA FORZA ST, HONDA FORZA T, HONDA FORZA S, HONDA FORZA X, HONDA PCX150, HONDA PCX160, HONDA ADV150, HONDA PCX125 Hybrid, HONDA CB250R, HONDA CB250F, HONDA CB223S, HONDA CBR250R, HONDA FTR223, HONDA CBR125R, HONDA CB125R, KAWASAKI Z125 PRO
Anodized shines brightly!
It is only exchanged with NORMAL Cap, so it is safe for Sunday mechanic!
It is ideal for dress-up with the color of the car body.
View detail
Fits: HONDA 400X, HONDA AfrIca TwIn, HONDA BROS I (NT650), HONDA BROS II(NT400), HONDA CB-1, HONDA CB-1 II, HONDA CB1000R, HONDA CB1000SF, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300DC X-4, HONDA CB1300SF, HONDA CB1300SB, HONDA CB400F, HONDA CB400Four, HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
For self-satisfaction.
I had about 4 Oil Filters as spares, so I could use the Oil Filters I had for the next 4 years.
I was very confused when I came to purchase the product.
I was wondering if the Gold amount is the same as replacing the CartridgeOil Filter 30+ times for the Gold amount.
However, I was excited and told myself that Engine oil flow is good without Garbage.
Since the purchase, MORIWAKI's Mark and colors have increased my satisfaction.
I also felt a little self-loathing because my motorcycle is a Rebel, so I don't turn it at high rpm, and I was later convinced that the oil fluidity had nothing to do with it.
I still have a CartridgeOil Filter and am considering whether to use it or not.
The sense of ownership is perfect.
View detail
Fits: HONDA Phase TypeS, HONDA PCXe: HEV, HONDA PCX, HONDA Forza S, HONDA phase, HONDA Forza., HONDA Forza., HONDA Forza X, HONDA Forza Si, HONDA ADV150, HONDA PCX160, HONDA Forza X, HONDA Forza Z, HONDA Forza Z, HONDA ADV150, HONDA ADV160, HONDA PCX eHEV, HONDA PCX, HONDA PCX160, HONDA FAZE
It works well
[How is it used?
City driving and Touring.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
A 10mm and 8mm GlassesorBox wrench and a 17mm Spanner are all you need (front and back).
How was your experience with it?
The braking power was as expected, the initial braking is better, and the braking power is as good as the grip.
View detail
Fits: その他 , HONDA 400X, HONDA 400X, HONDA videotape recorder, HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX150, HONDA PCX, HONDA PCX, HONDA PCX, HONDA GROM, HONDA GROM, HONDA GROM, HONDA FORZA, HONDA CBR400R, HONDA CBR400R, HONDA CBR400R, HONDA CBR250RRR, HONDA CBR250R
Image changes
It was a good decision to buy it because the Tension goes up every time I ride. View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
good heated grip
Second time use kijima heated grip. I used gh08 last time and this time gh10. It is quite easy for install and internal switch makes handle bar clean. Highly recommend this heated grip. View detail
Fits: HONDA GB350, HONDA FORZA-SI, HONDA PCX160, HONDA ZOOMERX, HONDA GB350S, HONDA PCX125, HONDA MONKEY125, HONDA PCX125 Hybrid, HONDA glom, HONDA PCX125 E:HEV, HONDA PCX150, HONDA DAX125, HONDA Universal(for Φ22.2 Handle), HONDA CT125CT110 HUNTER CUB, HONDA CL250
Attach your phone to the HandlebarCenter
Purchased to attach a Smartphone Folder to the HandlebarCenter of a GB350S.
It was easy to install as it was only an OEM Product and replacement.
Handlebar operability remains unchanged.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB125R, HONDA CB223S, HONDA CB250R, HONDA CB400SS, HONDA CB650R, HONDA CB650R, HONDA CBR1000RR, HONDA CBR400R, HONDA CBR600RR, HONDA CBR650F, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA CRF250, HONDA CRF250L, HONDA CRF250M, HONDA CRF250RALLY S
Easy dress-up!
I bought it as a dress-up! I knew I wanted to enjoy the ride and be satisfied with the look of the car. The work itself is super easy! Just remove the screws, replace them with OEM ones, and install them again.
The DAYTONA is high quality and I was satisfied with its appearance and large size! I'm not sure if it's the price or the quality, but if you want to be satisfied with the look and feel of the product, please install it!
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Bright!
I bought a used VINODELUXE Valve because it was out of stock, so I looked for it and found it.
It is not made in China, which I have never heard of, and which I sometimes see on Amazon and other places. The brightness is nothing compared to the Normal valve. It is bright! It is enough for the speed range of a moped.
It may be a problem on the vehicle side, but switching from Low to High is smooth, but conversely, when changing from High to Low, I feel that it changes with a slight one-tempo13 delay.
View detail
Fits: KAWASAKI Z1000J1, KAWASAKI Z1000J2, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE+, KAWASAKI Ninja H2 CARBON, KAWASAKI Ninja H2, KAWASAKI Ninja H2 SE, KAWASAKI ZEPHYR1100 RS, KAWASAKI 1000GTR, KAWASAKI GPZ1000RX, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100 II, KAWASAKI ZZR1100(C)(ZX-11), KAWASAKI ZZR1100(D)(ZX-11), KAWASAKI ZEPHYR1100
CB1300SB.
It can be easily attached to the Large type Screen of Pooch with only the Base of the RearBOX on the Handle mirror.
The box needs to be removed.
I think it is indispensable for can-two and long-distance overnight touring.
The blindfold would also provide security.
View detail
Fits: HONDA VTR250, YAMAHA MT03, HONDA Forza300, HONDA CB500X, HONDA CB500F, HONDA CB150R, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, HONDA HORNET250, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA CROSSCUB110, HONDA APE 50, HONDA XR100MOTARD
well done
I don't have enough space on my bike handlebars.
I needed a bracket to fix the phone holder and a place to mount the Insta360,
This product solved it once and for all.
Daytona products never disappoint
Installation takes about 5 minutes. Quality is also lacking. -------------------------------------------------- -------- Because there is no right place in the bike handle I needed a bracket to fix the cell phone cradle and a place to mount the Instagram 360, This product has been solved at once. Daytona products are not always disappointed Installation is enough for 5 minutes. Quality is also lacking. Powered by Google Translator
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Purchased as Base for Smartphone Holder
I purchased two of these as a base for my Smartphone Holder, Gopro, and MINI TaBrett. They are easy to install, but you will need a Hexagonal Wrench, which is not included in the package. The only drawback is that the shortest bolt is too long, and the material of the bolt is not indicated. View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Discreet and easy to remove and install RAM Holder
Yamaha Bolt R-Spec, this mount is attached to the position above the Handlebar ClampLeft with the supplied M8.
RAM Holder can be easily detached and attached.
Quantity Holder a little outwardly.:If set, it will not interfere with the Meter.
Where the limited space of the Handlebar does not have to be sacrificed for Mount,
Also, when the Holder is removed, this Mount should be unobtrusive.
Quantity the phone:It is useful when I ride with Set.
I used the same RAMBase on another motorcycle for about 3 years and got a small crack on the round-headed rubber.
I guess it depends on the frequency of use and the environment in which the Motorcycle is stored, but at this price, it makes sense.
View detail