Reviews
![MONO LINE Rear Single Shock [MZ Series] MZ366](https://img.webike-cdn.net/catalogue/images/50511/117-2312001_01_TS.jpg)
Fits: YAMAHA RZ250R, YAMAHA RZ250RR, YAMAHA RZ250, YAMAHA RZ350
YSS yh Rear Suspension
When installing, the lower seal is too tight to insert the shaft.
The lower Seal was not installed in this replacement project.
The grease needs to be replaced periodically, although there is no problem in operation.
View detail
![VX Series Chain 520VX3 Silver [with Caulk (ZJ) Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_S&S_P_TS.jpg)
Fits: KAWASAKI KLX650SR, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA SRX400, YAMAHA MT-03, YAMAHA MT-25, HONDA FTR250, HONDA CRM125, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI KLX230, KAWASAKI KDX250SR, SUZUKI DR200, YAMAHA YZF-R3, YAMAHA XJ6NA, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, HONDA CBR500R, HONDA Rebel300
I like the chain
I purchased it on the recommendation of a motorcycle friend at the same meeting. I replaced the chain last year and have been using it for 10 months. Compared to the existing factory chain, the shifting is smooth and the direct connection is very good. I chose silver as the color and it looks very clean, so I feel refreshed every time I drive. -------------------------------------------------- -------- I purchased it on the recommendation of a motorcycle friend at the same meeting. I replaced the chain last year and have been using it for 10 months. Compared to the existing factory chain, the shifting is smooth and the direct connection is very good. I chose silver as the color and it looks very clean, so I feel refreshed every time I drive. Powered by Google Translator View detail
![VXSeriesChain 530VX3 Silver [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/73326/0517_530VX3S&S_togo_TS.jpg)
Fits: HONDA CB1100RS, HONDA CB1100EX, HONDA CB1100, HONDA CB1100 type II, HONDA CB1100, HONDA CRF1100L(Africa Twin), HONDA CBR1000RR SP, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000F, HONDA CBF1000, HONDA CBR1000F, HONDA CBR1000F, HONDA CB750K6, HONDA CB900 HORNET, HONDA CB900F (BOL D'OR), ROYAL ENFIELD BULLET 500EFI, ROYAL ENFIELD ContinentalGT
Best Balance Choice
If you consider the product as a consumable item without overdoing it, you will end up with the best balance. The Chain Cut & Crimp tool is also a beautiful choice. A bit of a geek's touch, isn't it? The silver color is a nice touch. View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Simple is Best!
It is a perfect score because it was intended to reinforce the License Plate. 。
It is excellent in terms of strength, texture, and cosmetics.
It is not suitable for dress-up purposes, as it has almost no dress-up effect.
View detail
Fits: YAMAHA RD350, YAMAHA RD350, YAMAHA RD350B, YAMAHA RZ350L, YAMAHA RZ350NCII, YAMAHA RZ350N, YAMAHA RZ350N, YAMAHA YZF600RKC, YAMAHA YZF600RK, YAMAHA YZF600RJC, YAMAHA YZF600RJ, YAMAHA YZF600RHC, YAMAHA YZF600RH, YAMAHA YZF600RGC, YAMAHA YZF600RG, YAMAHA YZF600R (YZF600RWC), YAMAHA YZF600R (YZF600RW), YAMAHA YZF600R (YZF600RVC), YAMAHA YZF600R (YZF600RV), YAMAHA YZF600R (YZF600RTC)
Genuine Yamaha Bearing for YZF600 2001
This bike came in for a bit of an overhaul in the engine department and needed a few parts to finish the project. One of the main issues was a bad transmission bearing which when removed had seen better days. The bike did have over 95,000 miles on it so was probably due anyway. Finding the right part was easy as I used the tools Webike provide in their help section and then I cross referenced it on Yamaha schematics to be sure. The bearing was surprisingly good value and better than I could source locally. With some other smaller parts, I got them all shipped together using EMS as my couier. My order arrived in 5 days, undamaged and perfect condition throughout. The bearing did come in the Yamaha box and was padded with bubble wrap around the outside. The bearing itself is a pretty big one for this bike. The hard part was getting the old one out as there were also some corrosion on that. The new bearing runs smooth, has a slick movement and fitting in perfect with the right drift tool. There is a long way to go before this bike can be started again but just the mechanical movement by hand and there were no nasty sounds coming from that area now. Job done. Thanks Webike, great work. View detail
Fits: APRILIA SX50, HONDA NSR80R, KAWASAKI KZ1000 Police, KAWASAKI LeoStar, PEUGEOT Speed Fight 2 WRC, ROYAL ENFIELD Britt 500, ROYAL ENFIELD BritClassic, ROYAL ENFIELD BritClassic Deluxe 535, ROYAL ENFIELD Lightning Custom 535, YAMAHA 125R, APRILIA SR125, APRILIA SR150, APRILIA Mojito Custom 50, BETA EVO 80 JUNIOR, BETA EVO 80 SENIOR, BETA rr 2t 250 enduro, HONDA CRM250, HONDA CRM250R, HONDA CRM50, HONDA CRM80
watchman
For Stock.
It is a standard product and safe.
View detail
Fits: YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA XSR900, YAMAHA XSR900, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ85, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09
TZr50R Oil Filler Cap O-ring
[How is it used?
Used for EngineO/H of YAMAHA/TZr50R.
This item is an O-ring of Oil Filler Cap.
It is not a part that needs to be replaced, but we replaced it because it was a good opportunity to do so.
How was your experience with it?
OEM parts are the only choice for engine parts. There is no problem with quality.
I compared it with the old O-ring, but the old one was still hardened.
Oil does not leak from this area, but does it affect the pressure application?
How did it compare to other products?
There is no Other Brand Product, so there is no comparison. Even if there were, OEM would be the only choice.
[Points to note]
I installed it while taking care not to twist it during installation.
Grease is also applied just in case.
View detail
Fits: APRILIA SX50, HONDA NSR80R, KAWASAKI KZ1000 Police, KAWASAKI LeoStar, PEUGEOT Speed Fight 2 WRC, ROYAL ENFIELD Britt 500, ROYAL ENFIELD BritClassic, ROYAL ENFIELD BritClassic Deluxe 535, ROYAL ENFIELD Lightning Custom 535, YAMAHA 125R, APRILIA SR125, APRILIA SR150, APRILIA Mojito Custom 50, BETA EVO 80 JUNIOR, BETA EVO 80 SENIOR, BETA rr 2t 250 enduro, HONDA CRM250, HONDA CRM250R, HONDA CRM50, HONDA CRM80
Plug replacement
Regular Plug replacement for CRM. It is a little bit covered. View detail
Fits: HONDA CBR400R, HONDA CBR400R, SUZUKI STREET MAGIC II, SUZUKI WOLF50, SUZUKI STREET MAGIC, SUZUKI RM80 LX, SUZUKI RM80 LW, SUZUKI RM80 V, SUZUKI RM80LT, SUZUKI RM80 LV, SUZUKI RM80, SUZUKI STREET MAGIC 110II, SUZUKI STREET MAGIC 110, SUZUKI swish, SUZUKI WOLF125, SUZUKI GN125E, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI WOLF200, SUZUKI BIG BOY
XG250 TRICKER
I use it on my XG250 TRICKER.
The Motorcycle Cover is a consumable item, so this thickness is sufficient for this price.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Necessary and sufficient
Solidly made, thick and strong enough.
It is necessary and sufficient since it is installed for the purpose of preventing distortion and bending of the Number.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Number Protection
I installed it to prevent the Number from bending. So far, it works well because it does not bend when it hits.
Also, it's very heavy.
View detail
Fits: KAWASAKI KLX650SR, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI KLX230, KAWASAKI KDX250SR, SUZUKI DR200, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XJ6NA, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA SRX400, YAMAHA MT-25, YAMAHA MT-03, HONDA FTR250, HONDA CRM125, HONDA 400X, HONDA 400X, HONDA AX-1, HONDA CB223S
For CB250F
.Actually this item i could not found in my country (VX Series Joint Link 520VX3). Finally I bought it from webike. It is original. Very good packaging.fast shipping.I am happy to deal with the webike team View detail
Fits: HONDA CRF450RX, HONDA CRF450L, HONDA CRF250M, HONDA CBR400R, HONDA CBR250RR, HONDA CB250R, HONDA 400X, HONDA 400X, KAWASAKI Z250, KAWASAKI Z650, KAWASAKI VERSYS, KAWASAKI VERSYS, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI Ninja 650, KAWASAKI KLX230, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250, SUZUKI SV650X
How it feels to use Daido vx3Silver chain on NINJA2 Helmet50Rr
It is a very nice Chain that fits NINJA2 Helmet 50Rr effectively. The Silver finish is rust free and will fit any color of body. View detail
Fits: DUCATI 1098 S TRICOLORE, YAMAHA FZR250, DUCATI 749, DUCATI 748, DUCATI 748SPS, KAWASAKI ESTRELLARS, TRIUMPH DAYTONA675, MV AGUSTA BRUTALE-S, DUCATI 748SP, DUCATI 748S, DUCATI 748RS, DUCATI 748R, KAWASAKI ESTRELLARS LIMITED EDITION, DUCATI 749S, DUCATI 749R, DUCATI 749 DARK, DUCATI 1098 S, KAWASAKI ELIMINATOR 125, DUCATI STREETFIGHTER848, DUCATI 1299
I think it is necessary and sufficient.
This is just my personal opinion, but I think it is not a PeLePera, and considering the price, I think it is satisfactory enough. View detail
![VXSeriesChain 520VX3 Gold [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_G&G_P.jpg)
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Chain is DID
The OEM chain rusts quickly, so we changed to a plating chain for appearance.
Gold is still beautiful.
Plating on the corners gradually becomes thinner and thinner as it is scrubbed for cleaning.
The color will fade,
If you don't like it, Silver plating is recommended.
View detail
Fits: YAMAHA RD350, YAMAHA RD350, YAMAHA RD350, YAMAHA RD350, YAMAHA RD350B, YAMAHA RD350B, YAMAHA RZ350L, YAMAHA RZ350L, YAMAHA RZ350NCII, YAMAHA RZ350NCII, YAMAHA RZ350N, YAMAHA RZ350N, YAMAHA RZ350N, YAMAHA RZ350N, YAMAHA FZ750N, YAMAHA FZ750S, YAMAHA FZ750S, YAMAHA FZ750U, YAMAHA FZ750U, YAMAHA YZF-R6
Genuine Yamaha Circlip for FZ6R 2014
As with when ever I change out bearings regardless of where, if the circlip is also available, I do tend to change these out too. No point putting a previously removed circlip on a new build. Yes, it might look ok but the tension is never going to be what it actually should be. So, finding the right circlip was as straight forward as finding the bearing. Using the tools Webike provide on their help pages and cross referencing for my own peace of mind on Yamaha schematics. The price was excellent as expected. With some other parts for this bike in my basket already, I had them all shipped together to save a little shipping fees. EMS is my courier of choice as they just get the orders delivered fast with no fuss. Upon arrival, the box was well packaged and all the smaller parts were individually packed for safety. The circlip came in the standard Yamaha packet. Not really much I can say about this circlip, it is well machined, the perimeters are within spec. The quality is plain to see but until you attempt top put it in place, you are never going to know how it fits. With no issues on the install, I can say, this is a top quality part and that was the finish of the main bearing in the transmission replacement. Very pleased with the out come, the engine sounds healthy once again. Thanks Webike. View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
CB250R installed.
I installed it on my CB250R. Affordable and easy to see.
It's just right because it doesn't stick in the Motorcycle seat.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA YZ450F, YAMAHA RZ350R, YAMAHA SR400, YAMAHA SR500, YAMAHA WR450F, YAMAHA XTZ-750XTZ750 SUPERTENERE, YAMAHA YZ250, YAMAHA YZ250X
Have you become snappier?
[How is it used?
I bought it because I use Enduro as my main and use Clutch a lot for logs and gullies.
Was the one you received as per Image?
It is exactly as shown in the Image. I even feel that it is packed more Compact than I expected.
Was the installation difficult?
Simply replace the existing clutch spring that is holding it in place, and if you work with the motorcycle on its side, you don't even need to pull the oil out. You just need to make sure that the spring is properly seated in the Retainer groove.
How was your experience with it?
Since the last time I rode the Washer, there was a little bit of free time, so I could not say that there was a drastic change! I used only one washer, so I may add another washer to change the characteristics a little more.
[Included Parts:were they on?
The bolt has a countersunk hole to reduce friction and a hexagonal head. The torque is 10Nm, but if you do not have a hexagonal tool, you will have to tighten the bolt by feel.
[Was there anything that disappointed you?
No, it is not. This time the test was at low speeds, so I am looking forward to seeing what happens at high speeds.
View detail
![VXSeriesChain 530VX3 Gold [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/73326/0517_530VX3_G&G_P_togo_TS.jpg)
Fits: HONDA CRF1100L(Africa Twin), HONDA CB1100RS, HONDA CB1100EX, HONDA CB1100, HONDA CB1100 type II, HONDA CB1100, KAWASAKI Z750B, KAWASAKI Z400FX, KAWASAKI Z400GP, KAWASAKI Z550FX, KAWASAKI Z400FX, KAWASAKI W1, KAWASAKI W1SA, KAWASAKI W3, KAWASAKI Z250FT, KAWASAKI VULCAN800 DRIFTER, KAWASAKI VULCAN800 CLASSIC, KAWASAKI Ninja ZX-9R, KAWASAKI VULCAN800, KAWASAKI Ninja ZX-9R
(Caution) LINKs are not enough for the model that is compatible with the product.
I made arrangements after confirming the model of the car to which it was compatible.
It was 2 LINKs short.
I'm sorry I didn't check the current Piece count properly.
Very disappointing
The following were listed as compatible models, but in reality they were 100 LINKs.
• Z550FX
? Year:80-82
Number of links on the OEM 98
I have wasted Gold, so I will give this rating.
View detail
![VXSeriesChain 520VX3 Steel [with Clip(FJ)Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_Steel_P.jpg)
Fits: HONDA REBEL(REBEL)500, HONDA CRF450RX, HONDA CRF450L, HONDA CRF250M, HONDA CBR400R, HONDA CBR250RR, HONDA CB250R, HONDA 400X, HONDA 400X, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Used for SL230.
I bought this for touring with my SL230. If I had the budget, I would have purchased a plated or anodized coated chain, but this time I compromised with steel. I chose this one because I can ride long touring without worrying about durability and maintenance (although of course I will maintain it after long touring).
I have only used it for about 500 km, but the surface has rusted due to moisture, my fault for choosing Steel, but I am disappointed. Next time I will buy one with surface treatment.
View detail