Reviews
Looks great!
When riding in the rear seat, I felt that the Belt alone would not support my body, and I also wanted to customize the look.
I haven't actually put a person in the Rear seat, so I don't know for sure how stiff it is or how it feels, but when I leaned on it myself, I thought it was sufficient for my needs, so I'm giving it one star.
Design and appearance are still cool.
View detail
Review of the replacement of the size up from L to XL.
They are a replacement for Goldwin Mesh Gloves that I used for several years.
The old MODEL is L Size but I was a little concerned that the wrist portion was a little short.
This time, with the MODEL of item number:GB64180. XL】 【XL I bought it sized up to
The wrist fit just as I wanted, but the extra length at the thumb was a little too large.
It is a bit of a concern, but I think it will go away with familiarity and use.
The design has also changed from the old model, which had a slightly extravagant feel, to a more refreshing design, which is also a replacement.
This was the motivation for the
View detail
Lighter than expected
It is totally lighter than the OEM Bar End.
I bought it for its design, so I have no complaints at all.
The work is easy since all you have to do is remove the bolt and replace it, but since Torque is used on the S1000RR, you may need to prepare tools.
View detail
I was able to replace it properly.
I had a DRC Chain tool in the past, and when cutting a 428 chain, the tip of the tool broke off and I had trouble replacing it, so I was distrustful of this manufacturer's products.
This time, I decided to buy it after seeing other people's impressions and videos that seemed to work, and after considering the labor cost to ask the shop to do it.
I started with Chain cut to replace the 520 Chain and was able to cut it with no problem at all.
The work proceeds according to the instruction manual and is completed relatively smoothly until the Plate is press-fitted.
The last Crimp work, the Body is a little smaller than the Material.:Although it was light for aluminum and required considerable force, we managed to install Crimp.
I think it is a great product that can do everything from cut to crimp with just one tool. The size is larger than the previous version and I think it is stronger.
If you want to replace the Chain and Sprocket by yourself, we recommend this product because it is reasonably priced and works well!
View detail
On the MVX250F.
I used it to fill the front fork with air. It's good because I can fill low pressure like 0.4 properly. View detail
Exactly to a certain Manufacturer's Mesh jacket?
I was looking for a Chest Pad that fits a certain Manufacturer's Mesh jacket and found this product.
(Komine, see review of RSThailand Chi is mounted too low for 2024 MODEL)
I think it is CinderellaFit for me and I am glad I purchased it.
View detail
Highly effective in preventing mud splashes
There was an 85mm gap between the OEM Mud Guard and the inner fender, and there was a lot of mud splashing from that area.
The License Plate and Top case get dirty when driving in the rain, and I was looking for something better and found this product.
This is a dedicated product, so it can be installed without any modification.
If you are not concerned about the torque, you can install it with only a 4mm and 5mm Hexagonal Wrench, and the work time is about 10 minutes.
In the photo, the hexagonal hole has a plug, but the plug is not included.
Surface is Carbon Style PP (Polypropylene) Made of.
The OEM Mud Guard has a reflector, but this one does not, so you will need a separate license frame with reflector or a reflector that can be tightened together with the license plate.
View detail
![STUNT EVO 2 AIR FLOW [StuntEvo TwoAir flow] Gloves](https://img.webike-cdn.net/catalogue/images/117177/STUNT_EVO2AIR_FLOW_wht_TS.jpg)
It's cool
Cool, love the design.
Knuckle part feels like it hits a little (room for improvement).
View detail
StylingUp and Improved usability
Styling couldn't be better.
However, the difference is Large because the OEMSeat is too comfortable, but the Cornering by the appearance and the load from the buttocks is much improved.
View detail
Fits: GASGAS EC250, GASGAS EC300, GASGAS EC250F, GASGAS EC350F
Installed on MY2023 EC250
I bought this for my GasGas EC250 MY2023 which I always use for forest road touring.
Since it is used for slightly intense forest road touring, the exterior is quickly falling apart.
I always buy the Exterior Kit from Poly sports because I can buy the whole set at a very reasonable price.
The quality is no different from OEM products, and there is no tendency to crack, which is common with Chinese plastic parts, making it very useful.
View detail
It needs to be shifted a little and put on the 2024 CBR600RR.
2024 CBR600RR compatible products (?) but it hits in the search results as
The shape of the knee side is slightly different, so it needs to be shifted and applied.
The glue was coming off a little bit, but other than that, I'm satisfied!
View detail
It's a hassle to search and ask for help! For those who want to
In the overhaul of SEROW225, I disassembled the upper waist, so I needed a whole set of Gasket.
I thought that OEM is the best in terms of quality, but if I accumulate a lot of intentions, it will cost a certain amount of gold, and there were some parts that I was not sure whether to change or not, so if I can replace all of them at this price, it is easy.
The quality of the product is absolutely fine. It is totally usable.
View detail
Fits: HONDA DAX125, HONDA MONKEY125
Is it essential in modern times?
Good product
When you live a life where your phone is indispensable, battery is always a concern.
The USB port gives me a sense of security.
If you read the Instruction Manual carefully, I think it is gentle as a work S-Kill.
However, it is necessary to pay attention to the removal and installation of the light cover (plating parts) and the fit of the wiring.
View detail
substitute for an another
I bought this for a replacement for a plastic hammer that had a scratch or dent on the head. View detail
Ideal for lightweight
Installed on 8BK-RG74J.
No loss of horsepower with regulated engines = can be converted by replacing the Exhaust System. but there was not much change at the JMCA, where the regulations are tighter.
In the 250cc class, the Large body only varies by 1 to 2 horsepower no matter which Exhaust System is selected, so this Exhaust System is recommended for weight reduction purposes.
As for the sound, the 8BK is almost 90db OEM, so you hardly notice any change in volume, but some parts have a thicker sound depending on the RPM.
In terms of sound quality, I think you would feel more change with Planus or WR's Slip-on Silencer.
The quality, however, the accuracy of the front pipe was quite poor, and it did not fit neither the Engine nor the Center pipe, so it had to be installed while bending it with Lever.
Although less expensive than other Full Exhaust Systems, it would have been nice to have a more accurate product.
When installing the Silencer, it is recommended to temporarily fix the Exhaust Band and Bracket and then install the Bracket on the body of the vehicle, as it is quite difficult to install the Exhaust Band if you follow the Instruction Manual.
Also, although not mentioned in the Instruction Manual, it was necessary to change the Wiring position of the O2 Sensor.
The OEM position is fixed in front of the Clutch cover, but once removed and placed through the rear.
Although it has a few drawbacks, it does not look like other people's and can be lightened to a large width, so I think it is recommended for people who are visually oriented.
View detail
It looks good
The Exhaust Guard is fixed to the Exhaust Band, so it was difficult to align the Exhaust Guard and had to be removed and reattached 6 to 7 times. (It's a hassle.) Coordination.
There was not enough heat seat to cover the entire surface, so I applied the heat seat on the main side of the pipe, which is hotter.
It was installed without modification, but there is interference with the catalytic converter, so if you are concerned about this, you will need to shave it down or do other work.
View detail
Durability of Dial formula
The lid of the Dial under the Right Side came off less than a year after purchase, which is a shame because the Boots themselves are well made and have a good spec. feel. The size is the same as normal use, but there was no problem. The walking feeling was not hard and it was not hard to go down and walk around. View detail
Silver insert color is nice.
Installed in conjunction with Grip replacement.
Since the motorcycle has many plating parts on the body, silver was selected as an accent to the handlebar's black.
The color is good and the Silver looks good.
We considered heavier products, but chose this product with less thickness considering the width when parking.
View detail
Mirror is quite thin.
Installation is very easy and requires no special tools.
Mirror is quite thin, and before installation I can see right through their faces." However, when used outdoors, it seems to be surprisingly translucent.
Color:I chose Sky Blue, but the vision is yellowish.
It is uncomfortable at first, but eventually your brain compensates and you don't care.
but the visibility is still NORMAL. [Color] Compared to Clear, it falls off. It feels much darker, especially when entering Tunnel.
I knew that, but it seemed darker than I had imagined, Visibility." is -2
Also, the Shield is now hard to raise and lower. Quality and texture was set to -1.
View detail
Save money compared to buying at Rose!
The color stands out and gives it a custom feel, and as a manufacturer, I feel secure. I usually use OEM products, but I bought this product for fractional adjustment as well.
The quality and appearance were satisfactory.
View detail