Reviews
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F
FOR CB250F
I am happy to deal with the webike team.Actually this item i could not found in my country (Valve,Rim (Pirelli) 42753-KBS-901). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail
Fits: YAMAHA PW50, YAMAHA PW50, YAMAHA PW50, YAMAHA PW50, YAMAHA PW50, YAMAHA PW50, YAMAHA PW50, YAMAHA PW50, YAMAHA PW50, YAMAHA PW50, YAMAHA PW50, YAMAHA PW50, YAMAHA PW50
Genuine Yamaha Wheel Plate 1 for PW50 2021
This was a lovely little bike that we purchased as a present but it did need some attention due to a small accident and being dropped from a van. Careless but fixable. These were one of the last parts that would finish off the build so no point gettting any cheap after market ones when the price Webike sell these for is so cheap. A full set of these for front and rear wheels cost less than you would think. Now a hard part to find as they only fit the PW50 bike and for a lot of years too. I had a few other parts in my order and got them all shipped using EMS as my preferred courier. EMS just get your order to you faast which is perfect. The order arrived in 5 days from shipping and all the parts were in tip top condition. These plates were padded inside the box and got no damage. They are a lovely and well though out part, especially as these bikes are used by youngsters. They serve a vital part and keep littel feet and hands out of the wheels. It does happen and I have seen some kids get broken fingers and arms because the bikes did not have these fitted. ANyway, the bike look amazing and very pleased with the purchase. Brilliant. View detail
Fits: HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D2, HONDA CRF1000D2, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F
Genuine Honda Dust Seals for CBR500R 2018
This bike had an issue with a split dust seal for the rear wheel. Probably the cause of removing the rear wheel bearings and not seating correctly. Not too much of a problem and finding the correct seals was not hard at all. These seals do fit a lot of bikes and I do have some usually in stock but I ran out. I used the Webike help pages and then cross referenced with Honda schematics to make sure they were the same ones. The price Webike had these for was really good value and better than locally sourced. I did have a few other small parts in the basket so I just ordered them all together and this then saved some shipping costs too. EMS is who I use these days as they just get your order to yopu quickly. 5 days from shipping and the order arrived at my door. The small parts in the order were all packed really well and padded to stop any damage. These seals came in their own little Honda packets. I did order a few of them so I have some in for other bikes. The seals themselves are pretty supply but with the right amount of rigidity. They were well moulded and this is usually the case anyway from Honda OEM parts. Very pleased with the purchase and the bike rear wheel now has a good seal to kepp all the UK crap out. Thanks Webike. View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-09
Genuine Yamaha Nut for MT09 Tracer
As we were changing the front and rear sprocket for the MT09 Tracer 2019 it was time to change out the nut and washer for it too as you are not really meant to keep on using these parts due to deterioration upon removal and reinstallation. The nut here is the Genuine Yamaha one as it is always going to be the best option. The correct part was found using the tools Webike provide and cross referencing with Yamaha's own schematics. Webike price was excellent as always and better value than anywhere else I have found. With some other parts in my order, all were shipped together with EMS and arrived in perfect condition in 5 days from shipping. All the parts were in their own individual packets and inside a bubble wrapped envelope for security. The nut itself is a well made and well machined nut. The edges are not sharp but they are crisp and clean. The threads are very precise and no notchiness or stickiness was found upon installation. It went on super easily and with the lock washer also purchased in place, this nut is going nowhere. Thanks Webike, great job. View detail
Fits: HONDA VTR250, HONDA VTR250, HONDA VT750, HONDA VT500FT, HONDA VT500FT, HONDA VT500FT, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT1100, HONDA VT1100, HONDA VT1100, HONDA VT1100, HONDA VF750, HONDA VF750, HONDA VF750
FOR CB250F
Actually this item i could not found in my country (DUST SEAL (22X42X7) (ARAI) 91252-MC7-003). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail
Fits: HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
FOR CB250F
Well, I finally got it.Actually this item i could not found in my country (RADIAL BALL (6204UU) (NSK)). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail
Fits: HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R/R, HONDA NX650, HONDA NX650, HONDA XL600V, HONDA XL600V
FOR CB250F
I am happy to work with the webike team. Actually this item i could not found in my country (RADIAL BALL (6203UU) 96150-62030-10). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail
Fits: HONDA NR750, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP
Front Disc
The front disc seemed to have a damage at the time of maintenance, so it was replaced with a new one.
We would like to replace all the used bolts with new ones, but it would cost too much to replace all 6 bolts, so this time we replaced only the bolts that looked bad with new ones.
View detail
Fits: HONDA XR250, HONDA XR250, HONDA XR650L AC/B, HONDA XR650L AC/A, HONDA XR650L AC/A, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC
For cb250f
actually this item i could not found in my country (OIL SEAL (25X40X7) 91252-428-000). Finally I bought it from webike. It is GENUINE. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail
Fits: YAMAHA 50X (YW50FXL), YAMAHA 50X (YW50FXW), YAMAHA C3 (XF50AW), YAMAHA C3 (XF50W), YAMAHA C3 (XF50XL), YAMAHA C3 (XF50XR), YAMAHA C3 (XF50XW), YAMAHA C3 (XF50YR), YAMAHA C3 (XF50YS), YAMAHA C3 (XF50ZB), YAMAHA RT100 (RT100M), YAMAHA RT100K, YAMAHA RT100L, YAMAHA VINO (YJ50RN), YAMAHA VINO (YJ50RN), YAMAHA VINO (YJ50RP), YAMAHA VINO (YJ50RP), YAMAHA VINO (YJ50RR), YAMAHA VINO (YJ50RS), YAMAHA VINO (YJ50RS)
Genuine Yamaha O-Ring for VINO 50 CLASSIC
This was a small O-ring that was needed for the Vino 50 that was in teh shop. The original was really bad and had started to split. The part was super easy to find witht the help of the tools available on Webike. The price was brilliant and even though it's only an o ring, would you really want to risk a pathetic aftermarket one which will bring your riding to a halt... no. So, this was also ordered along with a few other parts and the shipping was very good indeed. I used EMS fast service as they do exactly what they say they will, deliver FAST, the end. Arrived with me within a week of ordering all the parts needed. All packaged really well as expected and any space in teh box was filled with bubble wrap and air pockets to protect any smaller and more delicate parts from damage. I now it is just an ring but this is an important one that you should be careful with. When I opened the packet, the o ring was perfect, no tears rips, loose pieces of rubber or anything. Yamaha really do know how to make o rings. It was a nice smooth surface and was flexible but not too much as this could also cause issues. Yes, I have made the mistake of buying cheap alternatives before to my detrement, just ended in disaster and had to get an OEM one anway, just do not waste your money on the cheap crap. Stick to getnuine for these things. Fitted within a couple of minutes. Very pleased with my purchase and from now on, I will ONLY buy genuine OEM for this area. Great service Webike, thank you very much View detail
Fits: HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250RX, HONDA CRF250RX, HONDA CRF250RX, HONDA CRF250RX, HONDA CRF450L, HONDA CRF450L, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R
Great hardware kit they come with thread lock already on them for the price cant beat it
Super nice to just get new bolt.I loved Oem parts Cheap and quality as wellGreat Value Might as well get it everytime you get a new rotor.I always buy a second set of wheels for my bikes. It is just easier to install a wheel instead of replacing a inner tube when a flat occurs. Especially on race day between motos or practice. I always replace old fasteners with new ones with critical operating parts on my bikes. Brake Rotors and Sprockets heat up during any ride time. Stress from heat and all that torque can weaken your bolts (fasteners). Keep your old ones for situational replacements. Just a suggestion but I always do. And even though some of these have nylock nuts or prefab thread-lock do use a dab of "blue" thread-lock upon installment. BTW! scuff your rotors in with 400-600 grip sandpaper too. View detail
Fits: HONDA CRF150R, HONDA CRF150R, HONDA CRF150RB, HONDA CRF150RB, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250RX, HONDA CRF250RX, HONDA CRF450L, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R
if your changing your rear sprocket then you need these
No more using my old bolts,Bought these to use with my new rear wheel. They work as expected. They come with a bit of lock tight on the threads so you don't have to worry about losing a bolt while riding.Good quality, they look great, install as they should and has thread locker already on them. Bolts may lengthen, threats may fail. This is cheap insurance."Replaced the bolts with these when changed sprockets" View detail
Fits: YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA XSR900, YAMAHA XSR900, YAMAHA YZFR1, YAMAHA YZFR1
Genuine Yamaha Nut for MT10 2019
As we were changing the front and rear sprocket for the MT10 2019 it was time to change out the nut and washer for it too as you are not really meant to keep on using these parts due to deterioration upon removal and reinstallation. The nut here is the Genuine Yamaha one as it is always going to be the best option. The correct part was found using the tools Webike provide and cross referencing with Yamaha's own schematics. Webike price was excellent as always and better value than anywhere else I have found. With some other parts in my order, all were shipped together with EMS and arrived in perfect condition in 5 days from shipping. All the parts were in their own individual packets and inside a bubble wrapped envelope for security. The nut itself is a well made and well machined nut. The edges are not sharp but they are crisp and clean. The threads are very precise and no notchiness or stickiness was found upon installation. It went on super easily and with the lock washer also purchased in place, this nut is going nowhere. Thanks Webike, great job. View detail
Fits: HONDA CN250, HONDA CN250, HONDA CN250, HONDA CN250, HONDA CN250, HONDA CN250, HONDA CN250, HONDA CN250, HONDA CN250, HONDA CN250, HONDA CN250, HONDA CN250, HONDA CN250, HONDA CN250, HONDA CN250, HONDA CN250, HONDA CN250, HONDA CN250, HONDA NSR50R, HONDA NSR50R
Was good
I was able to use it without any problems. Good. View detail
Fits: HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CBR600F2, HONDA CBR600F2, HONDA CBR600F2, HONDA CBR600F2, HONDA CBR600F2, HONDA CBR600F2, HONDA CBR600F2, HONDA CBR600F2
Genuine Honda Bearing Radial Ball for CB900F 2007
This is the replacement OEM wheel bearing for the CB900F rear wheel. Over time these do fail and if you catch them before they totally go you can get away with a straight swap out. This was the case here and to be honest, pretty lucky to find it when I did. The correct part was super easy to find and it does fit a lot of Honda bikes anyway so readily available. You could go for after market bearings but why mess witht he best and just go for the OEM Honda ones. Shipped by EMS and arrived in 5 days. The guard was well packaged and protected very well in foam. The bearing is nicely made, has a sweat smooth rotation and just feels quality. There is no notchiness and as I said, it runs totally freely. Fitting is not super difficult either but just make sure you do it correctly the first time or get a qualified mechanic to do it. Nice job, well pleased, very happy customer. Thank you Webike, great job. View detail
Fits: HONDA C70, HONDA C70, HONDA C70, HONDA C70
While I was replacing the Tire.
While I was replacing the Tire.
Rust Rust Adjuster was replaced with a new one.
It's beautiful, but...
Nut and Washer should have been new as well.
View detail
Fits: HONDA C70, HONDA C70, HONDA C70, HONDA C70
Somehow replaced with a new one.
I don't want to be covered in rust.
I somehow replaced it with a new one.
The new design does not improve the effectiveness of the functionality of the system, but it does make it more efficient.
Psychological and mood issues. (Lol)
View detail
Fits: SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE
Genuine Suzuki Front Wheel Bearing for DR650 2004
Due to maintenance the bearings on the fron wheel needed replacing. Rather than go for aftermarket ones, we went for the genuine Suzuni ones. No point in messing around for poor fitment. The correct bearing was found using the help tools on Webike pages. The cost of the bearings was really good value. Better than I thought if I am honest. The old ones were not fully done with but there was slight movement so this was only going to get worse over time. With a few other parts shipped together by EMS all arrived at my door in 5 days. Very well packaged and in perfect condition, Having already removed the old bearings, it was clear that these were going to fail very soon, compared to the new ones, the movement was clunky and notchy unlike the new ones which were silky smooth. The bearing are super clean and run really well. No complaints from me on that score. Fitting bearings you do need to take a littel care. If you do not have an adequate drift then you could damage them before even the first ride. Luckily, I have a lot of tools to help with this and to get them fitted perfectly. The wheel now does not sound and feel like it is on a tractor lol Thanks for the help Webike, great work. View detail
Fits: HONDA NSR50R, HONDA NSF100 A
แข็งแรงตรงรุ่นที่ต้องการส่งไวมาก View detail
Fits: HONDA NSR50R, HONDA NSF100 A
ของแท้ทำจากเหล็กคุณภาพดีมากๆ View detail