Reviews
Fixed Bolt
I purchased and installed the Bolt because it was a Honda OEM Product and the selling price was low.
It appears to arrive with alternate part number:93500-050100G.
View detail
Fits: HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA CB300R, HONDA CB300R, HONDA CB300R, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA Z125M, HONDA Z125M, HONDA CBF300N AC, HONDA CBF300N AC, HONDA CBF300NA AC, HONDA CBF300NA AC
Replacement Side Stand Switch Bolt for the Grom
About quality and texture: I am happy with the quality of the special bolt from Honda. Made from steel this M6 bolt is 16mm long with a stepped shaft and large head for securing the side stand switch. About the feeling of use: The special bolt is neccessary to secure the side stand switch without over tightening to ensure correct operation, it's great that the Honda replacement parts are so readily available. Products to buy together: Whenever placing orders here on Webike I always take advantage of the great prices they offer on servicing parts from Honda and add a few to the cart. Difficulty of installation: The process to install takes just a few minutes. Remove the old bolt with a 8mm socket and be sure to keep the switch in position before installing the special bolt. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting Honda quality for a fair price and I have not seen any other options to compare for this special bolt. About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: The Webike OEM parts section will be most helpful for sourcing other parts needed for your repairs. View detail
Fits: HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125
Replacement Side Stand Switch Assembly for the Grom
About quality and texture: I am happy with the quality of the side stand switch assemble from Honda, made up from numerous parts with the main being the electrical rotary switch molded in a plastic housing. About the feeling of use: After some issues starting the motorcycle it was determined that this switch had failed and being learners motorcycle I wanted to have all the safety features operating correctly which is now the case after the replacement switch was fitted, it's great that the Honda replacement parts are so readily available to rectify issues like this. Products to buy together: Whenever placing orders here on Webike I always take advantage of the great prices they offer on servicing parts from Honda and add a few to the cart. Difficulty of installation: The process to install takes an hour, I removed the left side shroud so I could easily access the electrical connection. The front sprocket cover, two engine cover bolts securing the support bracket and the bolt securing the switch in position need to be removed. Make sure the tang on the switch is positioned correctly before positioning the replacement switch on the side stand and reverse the process to complete the install. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting Honda quality for a fair price and I have not seen any aftermarket options to compare. About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: The Webike OEM parts section will be most helpful for sourcing other parts needed for your repairs. View detail
Fits: HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F
OEM Honda switch
My old switch had some kind of issue and would not sense when the stand was down. Finding the correct part was easy using the tools that Webike FAQ's provide to Honda direct. The price was much better than I could get here in the UK so decided, go for it. Shipping was cushioned somewhat as the part was from a larger order so all worked out well. Arrived within a week. Upon receipt, I was initially concerned as the box had a crumple in it but after unpacking it all, there was no damage to the parts inside. Fitted really well and now the switch finally works as it should. Thank you Webike View detail
Fits: HONDA C125, HONDA C125, HONDA C125, HONDA CT125A AC
If you hear a strange noise, please inspect it.
[How is it used?
When I was concerned about the noise when the Center Stand of the SUPER CUB was stowed away, I looked at the underside of the SUPER CUB and found that this part attached to the Center Stand was cracked due to age-related deterioration. It is surprising that there are so many people who hear noises coming from the Center Stand but do not know the cause of the noise.
How was your experience with it?
It is a small part, but after replacing it, the noise when storing the Center Stand disappeared and the "hang" feeling was relieved.
How did it compare to other products?
I don't think there are any other compatible components.
[Points to note]
None in particular. If you have an older SUPER CUB that makes noise from the STAND, it is a good idea to inspect what is going on in this area.
View detail
Fits: HONDA CH250 A, HONDA CH250 AC, HONDA CH80 A, HONDA CH80 A, HONDA CH80 A, HONDA CH80 A, HONDA CH80 A, HONDA CH80 A, HONDA CH80 A, HONDA CH80 A, HONDA CH80 A, HONDA CH80 A, HONDA CH80 A, HONDA CH80 A, HONDA CH80 A, HONDA CH80 A, HONDA CH80 A, HONDA CH80 A, HONDA CH80 A, HONDA CH80 A
I was able to use it for LIVE DIO ZX'02.
After 20 years, the STAND started to crackle and touch the road surface when banking or going over bumps, so we replaced it.
But the replacement was quite troublesome.
That said, since it is a STAND Spring, I realized the moment I removed the deteriorating OEMSpring that if I stood the STAND up, I would have to extend the Spring longer, and if I angled it to make it easier to hang the Spring on the STAND, it would not stand on its own!
I started working alone, although it would have been better if someone had supported me.
It was impossible for me to stretch the Spring and put it on while supporting the car body in a position where it was difficult to apply force.
It is not a soft Spring that can be stretched with one hand.
After 40 minutes of fighting under the blazing sun, we gave up and tipped the body over for installation.
It was over in seconds.
If you are going to install it, invite your friends to do it.
This item was not listed as a compatible car model, but it is the same length and shape as the original Spring.
The cracks in the mounting holes, which is a chronic disease of Live Dio's STANDSpring, have progressed considerably, and it will soon be time to purchase a Side Stand….
It also has a STAND lock, so I'd like to use Center Stand as much as possible….
After installation and running, it looks good as it seems to be harder to install.
Therefore, the number of Stars is not so much for this product, but for HONDA's DIOOEMSTAND, taking into account the overall evaluation and the difficulty of Spring's installation.
View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR
Together with Side Stand Replacement
Also purchased to replace OEMSide Stand!
I feel that the STAND takes better because it is OEM and new.
Recommendation to replace when old.
View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
Side Standfor Replacement!
Purchased to replace OEMSide Stand!
It is OEM Product, so it is safe. I think it is possible to exchange Side Stand without purchasing it.
I replaced it just in case.
View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CB650F, HONDA CB650F, HONDA CB650F, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
For Side Stand Replacement!
Used when OEMSide Stand is installed!
This is an OEM Washer, I needed two.
View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
Replace with OEM
[How is it used?
Purchased to be OEM from Short Stand
Was the one you received as per Image?
It is an OEM Product, so it is as per Image.
Was the installation difficult?
Just replace it. Might be a little difficult?
How was your experience with it?
I feel that the stability has increased with the change from Short Stand to OEM.
[Included Parts:were they on?
STAND's Bar On Lee.
[Was there anything that disappointed you?
There is none
View detail
Fits: HONDA PCX150, HONDA PCX150, HONDA ADV150, HONDA CB50R A, HONDA WW150 AC, HONDA WW150 AC, HONDA WW150A AC, HONDA WW150A AC
exchange
The side stand was not moving well and the spring was corroded, so it was replaced with a new one.
The same Honda OEM Product, and the price was reasonable, so it was a great help.
View detail
Fits: HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M
Side Stand Switch
About quality and texture - Good quality, solid plastic housing. About the feeling of use - Good safety switch to keep in operation, especially for someone learning to ride. Products to buy together - If you have a faulty switch you can choose to bypass it with this product from Kitaco, product# 676-9000910. Difficulty of installation - Medium level of difficultly, mainly for some covers requiring removal and routing the wiring. Cost performance and comparison with other products - Quite expensive but if you want an operating side stand switch you have no other option. About shipping and packaging - Packaged perfectly and all items arrived safety. This sea freight combined order was very well priced. Any concerns, cautions, or advice when purchasing - If you are troubleshooting your motorcycle also take into consideration the clutch perch switch. View detail
Fits: HONDA CRF300L AC, HONDA CRF300LA AC
from unbranded (S) Change to!
From CRF250LStandard (S) in order to change it to (S) I am planning to install a long Side Stand for View detail