Reviews
Fits: KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA
Please examine things carefully as this is a Large cut-off place.
We are currently working on a Restore of the immovable ESTRELLA,
We recently replaced a Camshaft Chain Tensioner.
Since the head cover was opened at that time, the head gasket was also replaced.
The original reason for the oil leak was the wear of the Tensioner, but since the oil was leaking through the →Gasket, the Gasket was unusable.
It would be wise to replace it. Basically, Gasket is not reusable.
Gasket and packing are used in various places, but what is the function of the gasket attached to the head cover?
[Head Gasket]
Gasket between the Cylinder block and Cylinder head of an internal combustion engine.
The seal must be strong enough to keep the internal pressure of the cylinder from escaping and to prevent coolant and engine oil from flowing into the cylinder, and it must have the highest strength of all the gaskets used for engines.
Why do we have to replace it?
Material of Head Gasket is Rubber 。
It deteriorates when exposed to outside air. In addition, the oil and the mixture of air are exposed to the air, so it is a very severe condition.
Deterioration may be severe.
[When it deteriorates...]
Oil cannot be held in place, which naturally leads to a decrease in oil.
As a result, the → combustion chamber suffers Damage! 。 The reduction in Oil will cause the Engine to burn out, further increasing repair costs and time.
The difference is obvious when you consider the cost of Gasket and the time it takes to change Gaskets (laughs).
Better to replace it before that happens.
Replacement Procedure] 〜For ~Head Gasket~.
Remove the head cover.
↓
The rubber rim on the reverse side of the head cover is the Gasket.
↓
(3) Remove it by pinching it with the tip of Tweezers or Radio pliers.
↓
(4) Clean the area where the Gasket was installed with parts cleaner, etc.
↓
(5) Place the new Gasket on the reverse side of the Head cover. Align the position properly.
↓
(6) Adjust the Head cover to the original position and tighten the Bolt to complete.
[After exchange]
Oil leakage near the head cover has been completely eliminated.
However, there is an oil leak near the oil pump.
I am glad that after the purchase, I never had to open the Engine area at all.
Is Gasket a low-cost or OEM product?
Gasket is easily available at low prices and is often convenient and substitutable, but OEM products should be recommended.
Since the durability of the engine area and other parts is required for durability, it is better to choose an OEM product or a product equivalent to an OEM product if you intend to drive the car for a long time.
View detail
Fits: KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250
Genuine Kawasaki Resonator Gasket for KX250 1997
I need a lot of parts to get this old and slightly damaged bike back on the road, these small parts are definitely needed for that purpose. Finding the gasket part number was easy using the help pages from Webike. I did not really pay much for shipping as most of the parts were small and pretty light. Even though I got the fast service from EMS, the price was still very good. All arrived with me in less than a week. The gasket was in perfect condition and Webike kept this nice and flat so not to distort the shape. The flexibility is enough so not to be an issue if it gets caught whilst installing. All the mount holes aligned correctly and fitted in less than half an hour. Now this is one of the many jobs that is completed, onto the next one for this old girl. The service I got from Webike was brilliant. Thanks a lot Webike. View detail
Fits: KAWASAKI KDX220R, KAWASAKI KDX220SR, KAWASAKI KDX220SR, KAWASAKI KDX220SR, KAWASAKI KDX220R, KAWASAKI KDX220SR, KAWASAKI KDX220SR
Genuine Kawasaki Resonator Gasket for KDX220
I need a lot of parts to get this old and slightly damaged bike back on the road, these small parts are definitely needed for that purpose. This was for the resonator gasket on the KIPS cover. Finding the gasket part number was easy using the help pages from Webike. I did not really pay much for shipping as most of the parts were small and pretty light. Even though I got the fast service from EMS, the price was still very good. All arrived with me in less than a week. The gasket was in perfect condition and Webike kept this nice and flat so not to distort the shape. The flexibility is enough so not to be an issue if it gets caught whilst installing. All the mount holes aligned correctly and fitted in less than half an hour. Now this is one of the many jobs that is completed, onto the next one for this old girl. The service I got from Webike was brilliant. I will continue to come back for all my OEM parts to you guys. Thanks a lot Webike View detail
Fits: KAWASAKI KX80/KX80-II, KAWASAKI KX112, KAWASAKI KX100, KAWASAKI KX100, KAWASAKI KX100, KAWASAKI KX100, KAWASAKI KX100, KAWASAKI KX100, KAWASAKI KX100, KAWASAKI KX100, KAWASAKI KX85-II, KAWASAKI KX85-II, KAWASAKI KX85-II, KAWASAKI KX85-II, KAWASAKI KX85-II, KAWASAKI KX85-II, KAWASAKI KX85-II, KAWASAKI KX85-II, KAWASAKI KX85-II, KAWASAKI KX85-II
Genuine Kawasaki Cylinder Base Gasket for KX85 2007
This bike was desparately in need of a new gasket for their KX85 2007 as the previous owner just did not keep up with maintenance at all. With it being a small off road bike, they do take a bit of work during riding but up keep is no excuse. Not a big deal. I found the correct part number from Kawasaki schematics etc. Webike price was really competitive too. A few other parts with this were ordered together by EMS and delivered in 5 days. All my order was delivered with no issues, all the gaskets were kept flat so not to damage. This gasket is not a big one but it does have some intricate details that need to be correct to fit the cylinder. You can see it has been manufacturered the right way and not cheaped out on it. It is sturdy and has a slight flexibility. All the holes aligned with the fitment and went on pretty easily too. Fitted quickly but precisely in just under an hour with everything else put back together. Very pleased with this one, the bike does sound a lot better and I know it will last a fair few years to come. Thanks Webike. View detail
Fits: KAWASAKI KDX220SR, KAWASAKI KDX220SR, KAWASAKI KDX220SR, KAWASAKI KDX220SR, KAWASAKI KDX220SR, KAWASAKI KDX220R, KAWASAKI KDX220R
Genunie Kawasaki Base Gasket for KDX200 2003
This bike was desparately in need of a new gasket for their KDX200 2003 as the previous owner just did not keep up with maintenance at all. With it being a small off road bike, they do take a bit of work during riding but up keep is no excuse. Not a big deal. I found the correct part number from Kawasaki schematics etc. Webike price was really competitive too. A few other parts with this were ordered together by EMS and delivered in 5 days. All my order was delivered with no issues, all the gaskets were kept flat so not to damage. This gasket is not a big one but it does have some intricate details that need to be correct to fit the cylinder. You can see it has been manufacturered the right way and not cheaped out on it. It is sturdy and has a slight flexibility. All the holes aligned with the fitment and went on pretty easily too. Fitted quickly but precisely in just under an hour with everything else put back together. Very pleased with this one, the bike does sound a lot better and I know it will last a fair few years to come. Thanks Webike. View detail
Fits: KAWASAKI KX125, KAWASAKI KX125, KAWASAKI KX125, KAWASAKI KX125
Genuine Kawasaki Cylinder Base Gasket for KX125 1997
This bike was desparately in need of a new gasket for their KX125 1997 as the previous owner just did not keep up with maintenance at all. With it being a small off road bike, they do take a bit of work during riding but up keep is no excuse. Not a big deal. I found the correct part number from Kawasaki schematics etc. Webike price was really competitive too. A few other parts with this were ordered together by EMS and delivered in 5 days. All my order was delivered with no issues, all the gaskets were kept flat so not to damage. This gasket is not a big one but it does have some intricate details that need to be correct to fit the cylinder. You can see it has been manufacturered the right way and not cheaped out on it. It is sturdy and has a slight flexibility. All the holes aligned with the fitment and went on pretty easily too. Fitted quickly but precisely in just under an hour with everything else put back together. Very pleased with this one, the bike does sound a lot better and I know it will last a fair few years to come. Thanks Webike. View detail
Fits: KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KDX250SR, KAWASAKI KDX250SR, KAWASAKI KDX250SR, KAWASAKI KDX250SR, KAWASAKI KDX250R, KAWASAKI KDX250R, KAWASAKI KDX250R, KAWASAKI KDX250R
Genuine Kawasaki Reed Valve Gasket for KX250 2000
I was a little surprised I could still source one of these direct from Kawasaki to be honest. I had previously checked but the local Kawasaki dealer could not locate and offered after market one. This was simple not what I had in mind so searched Webike and was pleased I could actually get an OEM one. Finding the part was not hard as I used the tools on Webike help pages and cross referenced with Kawasaki schematics for this model of bike. Very good valueand probably the same price as an after market one. So, why would you buy anything else than OEM. I do always order more than one part per order as this saves on shipping costs essentially. I go for EMS these days as they just get your order with you fast. This was no exception, arrived with me in perfect condition in 5 days from shipping. The reed valve is exactly what I needed as the old one was starting to split and bits flake off. Not really weird with the age of the bike and the use it has had. Anyway, the reed vale gasket was in a b=nice Kawasaki packet and kept nice and flat by Webike. The construction was excellent and the gasket was fitted really easily. Now I can confirm the bike runs a lot better and does not need over fuelling as it did. One happy customer. View detail
Fits: KAWASAKI KX500 (KX500-E9), KAWASAKI KX500 (KX500-E8), KAWASAKI KX500 (KX500-E7), KAWASAKI KX500 (KX500-E6), KAWASAKI KX500 (KX500-E5), KAWASAKI KX500 (KX500-E4), KAWASAKI KX500 (KX500-E14), KAWASAKI KX500 (KX500-E13), KAWASAKI KX500 (KX500-E12), KAWASAKI KX500 (KX500-E11), KAWASAKI KX500 (KX500-E10)
Genuine Kawasaki Cylinder Base Gasket for KX500 2001
This bike was desparately in need of a new gasket for their KX500 2001 as the previous owner just did not keep up with maintenance at all. With it being a big off road bike, they do take a bit of work during riding but up keep is no excuse. Not a big deal. I found the correct part number from Kawasaki schematics etc. Webike price was really competitive too. A few other parts with this were ordered together by EMS and delivered in 5 days. All my order was delivered with no issues, all the gaskets were kept flat so not to damage. This gasket is not a big one but it does have some intricate details that need to be correct to fit the cylinder. You can see it has been manufacturered the right way and not cheaped out on it. It is sturdy and has a slight flexibility. All the holes aligned with the fitment and went on pretty easily too. Fitted quickly but precisely in just under an hour with everything else put back together. Very pleased with this one, the bike does sound a lot better and I know it will last a fair few years to come. Thanks Webike. View detail
Fits: KAWASAKI GPZ400R, KAWASAKI GPZ400R, KAWASAKI FX400R, KAWASAKI FX400R, KAWASAKI FX400R, KAWASAKI FX400R, KAWASAKI FX400R
Genuine Kawasaki Carb Holder for GPZ400R 1989
A small job but this carb seal for the GPZ400R 1989 model was needed as the old one deteriorated over time. Finding the part was pretty straight forward by using the tools Webike provide. When I checked on Webike to see if they had the part, luckily they had so added to my order. With some other parts, all were delivered by EMS in 5 days. The boot is good quality as I expected anyway from Kawasaki and having had these kind of parts previous. Old ones are susceptible to damage but it's rare, they usually just deteriorate with age of lack of maintenance just like this one. The cost of this part was really good value. It came in it's own little packet and no damage in transit. The material is some kind of rubber but strengthened, not 100% sure with what but a new boot will do the job great. Very happy with the ourchase. Thank you Webike. View detail
Fits: KAWASAKI D-TRACKER, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLA CUSTOM
Genuine Kawasaki Hose Clamps for KLX250SR 1996
These were purchased as replacement for the KLX250SR that is in my storage container. I know I only need 1 but at this price is was silly not to get a few as spares as these do fit a lot of other Kawasaki models etc. The correct part was found suing the tools and help pages provided by Webike. Great source of information at you finger tips. With a few other parts I had all these shipped together with EMS and my order arrived in tip top condition in 5 days. The clamps are nothing too special but they are the correct size for the hose I need to clamp. No point in buying clamps that are not fit for purpose and incorrect sizing, They are a lovely glossed out black colour and blend in nicely to the rest of the bike. The adjuster is smooth and does not get caught up whilst tightening. Very pleased with this purchase. And now I have a few spares, maybe a few other jobs will get dome too. Thank you Webike. View detail
Fits: KAWASAKI KX65, KAWASAKI KX65, KAWASAKI KX65, KAWASAKI KX65, KAWASAKI KX65, KAWASAKI KX65, KAWASAKI KX65, KAWASAKI KX65, KAWASAKI KX65, KAWASAKI KX65, KAWASAKI KX65, KAWASAKI KX65, KAWASAKI KX65, KAWASAKI KX65, KAWASAKI KX65, KAWASAKI KX65, KAWASAKI KX65, KAWASAKI KX65, KAWASAKI KX65, KAWASAKI KX65
Genuine Kawasaki Head Gasket for KX65 2017
This bike the KX65 2017 definitely needed a new gasket as the previous owner just did not keep up with maintenance at all. With it being a off road bike, they do take a bit of work during riding but up keep is no excuse. Not a big deal. I found the correct part number from Kawasaki schematics etc. Webike price was really competitive too. A few other parts with this were ordered together by EMS and delivered in 5 days. All my order was delivered with no issues, all the gaskets were kept flat so not to damage. This gasket is not a big one but it does have some intricate details that need to be correct to fit the cylinder. You can see it has been manufacturered the right way and not cheaped out on it. It is sturdy and has a slight flexibility. All the holes aligned with the fitment and went on pretty easily too. Fitted quickly but precisely in just under an hour with everything else put back together. Very pleased with this one, the bike does sound a lot better and I know it will last a fair few years to come. Thanks Webike. View detail