Reviews
Fits: YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YFZ-R1, YAMAHA YZF-R6 W/ FLAMES, YAMAHA YZF-R6 W/ FLAMES, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1, YAMAHA R1, YAMAHA R1, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6
Replaced with a new part
My first purchase from your site... Shipping was good and very fast, I used EMS... Well packed and everything arrived fine!!! Original products in original packaging in the best quality!!! Thank You Webike!!! View detail
Fits: KAWASAKI ESTRELLA-RS LIMITED EDITION, KAWASAKI ESTRELLA-RS LIMITED EDITION, KAWASAKI ESTRELLA-RS LIMITED EDITION, KAWASAKI ESTRELLA-RS LIMITED EDITION, KAWASAKI ESTRELLA-RS LIMITED EDITION, KAWASAKI ESTRELLA-RS, KAWASAKI ESTRELLA-RS, KAWASAKI ESTRELLA-RS, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA
ESTRELLA's Crying Place
I started Restore of ESTRELLA, which was immobilized after I stopped riding it.
I was looking for the cause of the problem I felt at the time I was riding and was concerned about the restoration of the engine.
One of the causes we considered and replaced was the Piston ring.
[Piston ring]
Simply put, it is the Seal of compressed Gas.
The Piston ring acts as a seal when compressing the fuel/air mixture inside the Engine's Cylinder. 。 This maintains the pressure in the combustion chamber and keeps the Engine's Power.
Why did you think it was a Piston ring? ◆Why did you think of Piston ring?
*Looks like it's going up Oil.
Oil is running high...White smoke from the exhaust system while driving and engine oil is running low.
This is a symptom of oil wear→ Oil leaking from the gap between the Piston and Cylinder. Then, it is possible that the Oil leaks to the outside.
Here, we replaced it with an OEM product, not a low-priced external product, etc.
Piston ring replacement procedure
(1) Remove the cylinder head.
If you drop the Camshaft Chain down, you will have to lower it below the waist, so it is better to hang it with a needle gold with tension.
↓
(2) Remove the Ring of the Stopper with radio pliers and pull out the Piston Pin.
↓
(3) After the Clip is removed, press the inside Pin from the inside to easily pull it out and remove the Piston. 。
(4) Take out the old ring. It is deformed rather than chipped.
(5) Ring is correctly set to Quantity.:Set and Install 。 The order is ExpanderRing → top and bottom SteelRail→ Top ring→ SecondRing.
? Simply assemble in reverse order.
[After exchange]
White smoke from the Exhaust System is gone.
It seems that the Oil uplift was the right way to look at it.
However, the oil leakage does not seem to have stopped.
I would like to start on the next part.
The clearance between the cylinder and piston is very small (around 0.1mm), but this small gap makes it impossible to compress the air mixture and receive combustion pressure without loss.
It seems that there are many cases of malfunctions in ESTRELLA's Initial Model (90's), and one of them is oil leakage.
Initial Model's Piston ring is thin and has low strength.
If you suspect oil leakage as well as oil rise, you should consider replacement.
Oil leaks have not gone away yet, so next we will look at the Camshaft Chain Tensioner.
View detail
Fits: HONDA CRF150R, HONDA CRF150R, HONDA CRF150RB, HONDA CRF150RB, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB650F, HONDA CB650F, HONDA CB650F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F
For CB250F
Genuine product Spark (CR9E 98059-59916) Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
Fits: HONDA VF750, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A
Very good part
Original Honda part, new. It has a beautiful finish. It's trustable. Manufactured to a high quality standard. It appears to have good durability. I highly recommend it. View detail
Fits: HONDA CB900F, HONDA CB900F, HONDA CB750S, HONDA CB750S, HONDA CB750L, HONDA CB750K, HONDA CB750K, HONDA CB750K, HONDA CB750K, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB1100F
Oil change
I am replacing the seal along with the Mission oil change, but it is a bit expensive. It is just a sealing washer, but I feel it is expensive because Bolt is too cheap. View detail
Fits: HONDA CRF150R, HONDA CRF150R, HONDA CRF150RB, HONDA CRF150RB, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB650F, HONDA CB650F, HONDA CB650F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F
FOR CB250F
It's realy genuine and reasonable price.Spark (CR9E 98059-59916). It is Genuine. Very good packaging. Fast shipping. Thanks to the webike team. It Highly recommended. View detail
Fits: KAWASAKI KX450F, KAWASAKI KX450F, KAWASAKI KX450F, KAWASAKI KX450F, KAWASAKI KX450F
Great piston for the price
I have never been led astray on any yamaha oem part and when it came time to split the cases for a bottom end rebuild I added the oem piston kit (does require case split to install the oil sprayer). Immediate power and torque gains throughout with negligible rev impact.webike offers it at the best price. Shipping and packaging is great. Webike is too fast View detail
Fits: HONDA NS-1, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR50
repapering
HRCSticker on the rear cowl.
I put a scratch on it, so I am repurchasing it because I can buy the same OEM ProductSticker.
Perhaps it is because it is not that inexpensive, but it is properly protected and packed with cardboard.
It helps that HondaOEM Product sells the same thing, but every time I buy it, I wish it were cheaper because it is a Sticker.
View detail
Fits: YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09
To correct rattling of Pedal in Rear Sets
Quantity of 1-positionRear Sets in FAZE before.:Pair (for Left and Right) The included Wave washer to prevent rattling of the pedal was not well-seasoned, so it was very soft and rattled easily. I put this YAMAHAOEM Wave washer in and it worked perfectly.:Pair (for Left and Right) I bought two for two minutes.
Incidentally, COERCE's Rear Sets are probably manufactured by the same manufacturer as FAZE, so I believe this part can also be used.
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1, YAMAHA R1, YAMAHA YFZ-R1, YAMAHA YZF-R6 W/ FLAMES, YAMAHA YZF-R6 W/ FLAMES, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6
Genuine Yamaha Screw Set for YZF-R6 2006
I needed to replace the front brake screw set as it the original were failing and the head was mashed nd this did not make the bike look good at all, I decided I would change these for OEM screws as they fit with the age and how it looks on the bike. I went for the standard OEM Yamaha ones as this is what would look best by far. The correct parts was found using the tools Webike provide and cross referencing with Yamaha's own schematics. Best price ever for this set of screws and better than I could source locally. With some other parts in my order, all were shipped together with EMS and arrived in perfect condition in 5 days from shipping. The parts were well packed and no damage was sustained during transit. The screws that were on the bike had gotten a little chewed up but these are absolutely perfect and make the bike now look a lot better. I also purchased a brand new front brake reservoir cover too so the job got done correctly. Works a treat. Very pleased with this purchase, thank you Webike, awesome every time. View detail
Fits: YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1 (YZFR1FB), YAMAHA YZFR1 (YZFR1FCB), YAMAHA YZFR1 (YZFR1FCL), YAMAHA YZFR1 (YZFR1FCR), YAMAHA YZFR1 (YZFR1FL), YAMAHA YZFR1 (YZFR1FR), YAMAHA YZFR1 (YZFR1GCGY), YAMAHA YZFR1 (YZFR1GCL)
Yamaha Master Cylinder used on YZF-R1 2018
I got this as a replacement for the one that was already fitted to the R1 2018 but the seals had stared to go and the front brake was not holding as it should. The ones I have seen here are not great so I wanted to just get a fresh new Yamaha part so I jk ow it will work as it originally should do. I already have access to the Yamaha parts catalogue and this meant finding the right master cylinder was not difficult at all. The price Webike had this for was a bit of a surprise actually and lots better value that where I would usually get my parts from. The shipping cost was pretty good too and I used Fedex as I have used them may times beofre with no issues. My part arrived in about 6 days if I remember correctly. The master cylinder was packed well inside a large amount of wadding inside the outer box. The master cylinder with it being the same as I had just removed went on really fast and once I bled it all up, the front brake now works better than I remember and obviously, this is how is should work. The finish of the master cylinder is weird as it has a texture going off but this feels really nice. Well made part. View detail
Fits: YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT07, YAMAHA MT07
Genuine Yamaha Diapragm Reservoir Gasket for FZ8 2012
The old reservoir diaphragm was not in the greatest of condition when checking the fluid for maintenance. There was a noticible split in part of it and this is no doubt why the braking was useless on this bike. I was not going to leave it like that so decided to get a brand new one from Webike. The part was easy to find using the tools Webike provide and cross referencing with Yamaha schemaics for my own assurance. The price was excellent and better than I could surce locally. Shipped with EMS all my parts arrived in 5 days from shipping. The diaphragm came in teh usual Yamaha packet and aslo inside a bubble wrap encelope for safety. The diaphragm itself is a lovely moulded piece. Very supple and maliable which is of course needed to cope with the constant preseures of the brake fluid. Not too hard to fit as it is just a straight swap out. Now all back together, the brakes now work as they should. Give it a week and I will also bleed the brakes again. Great job, thank you so much Webike, happy customer. View detail
Fits: YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT07, YAMAHA MT07
Genuine Yamaha Front Brake Reservoir Cover for MT10 2019
The front brake reservoir cover had gotten a little bit worn and did not look good for my liking so I decided I would just go ahead and change this for a stock OEM Yamaha one. The correct parts was found using the tools Webike provide and cross referencing with Yamaha's own schematics. The price Webike had this for was excellent and better than I could source locally. With some other parts in my order, all were shipped together with EMS and arrived in perfect condition in 5 days from shipping. My parts were well packed and no damage was sustained during transit. The reservoir cover that was on the bike had gotten a little worn and messed up but this now looks absolutely stunning and make the bike now look a lot better. I also purchased a brand new front brake reservoir cover screws too so the job got done correctly. All works a treat. Very pleased with this purchase and my others in this order, thank you Webike, exceptional work guys as always. View detail
Fits: YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT07, YAMAHA MT07
Genuine Yamaha Front Brake Reservoir Cover for MT10 2019
The front brake reservoir cover had gotten a little bit worn and did not look good for my liking so I decided I would just go ahead and change this for a stock OEM Yamaha one. The correct parts was found using the tools Webike provide and cross referencing with Yamaha's own schematics. The price Webike had this for was excellent and better than I could source locally. With some other parts in my order, all were shipped together with EMS and arrived in perfect condition in 5 days from shipping. My parts were well packed and no damage was sustained during transit. The reservoir cover that was on the bike had gotten a little worn and messed up but this now looks absolutely stunning and make the bike now look a lot better. I also purchased a brand new front brake reservoir cover screws too so the job got done correctly. All works a treat. Very pleased with this purchase and my others in this order, thank you Webike, exceptional work guys as always. View detail
Fits: YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA YZ250FX, YAMAHA YZ250FX, YAMAHA YZ250FX, YAMAHA YZ250FX, YAMAHA YZ450F, YAMAHA YZ450F, YAMAHA YZ450FX
Genuine NGK Spark Plug for Yamaha YZ250F 2018
This is a racing spark plug for the YZ250F 2018. We decided we would try a racing plug for a change to see if there was any difference in performance. Finding the correct plug was not super hard as I already have a bookmark for NGK website and that way it's easy. Webike's price for this part was very good value. A lot lower than I could source locally here in the UK. With some other parts in my basket and shipped by EMS all arrived in 5 days.EMS are good value, very fast in delivering and better than some other couriers. All the items in my order were packed individually by Webike warehouse and all nicely padded out in the box so nothing could get damaged in transit and fill any space with bubble wrap and air pockets so nothing can be bounced about in transit. All arrived at my door perfectly. Didn't take too long to fit, pretty straightforward, after all it's a spark plug. Take your time and you will be just fine. Only time will tell if it has better performacne than the stock plug. Very pleased, thank you Webike for all your hard work and dedication. View detail
Fits: HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R
These gaskets are solid.
Ultimate kit for my CRF250R. Turned it into a competitive weapon. The cylinder gaskets that Oem provide with are very good quality. I had to replace my head gasket due to overheating and blowing it, I think it blew because I got too much oil on the stud when I lowered them in and it got on the head gasket and leached under it. The new gaskets worked great since.but with as hot as my bike was running, I'm glad the gasket blew before anything else did!! View detail
Fits: YAMAHA BOLT, YAMAHA BOLT, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA XSR900, YAMAHA XSR900
Genuine Yamaha Screw for MT07 2020
This was the screw for the MT07 2020 front reservoir. These are generally screws that if you do not have the right attachment that you can easily mess them up. This is the case here. The previous owner had used the wrong cross head bit and chewed up teh screw entirely. This meant I literally had to drill out the top of the screw to get it undone. I was also sorting out the diapgragm for this bike so it did need to come off. The correct screw was super easy to find as I already had the schematics from Yamaha and used the tools Webike provide anyway. The cost of the pair of screws was really good and with the rest of the parts I needed, I got them all shipped together. EMS is who I use these days as they just get the job done in great time. % days from shipping is when the order arrived. All the parts were very well packaged and the screws also came in a genuine Yamaha packet. They are really small but are very well machined. They have a black paint coating in the regualr satin finish. The threads are crisp and clean and free from flakes of metal. The went in perfectly and that is now one more job ticked off the long list for this bike. Great work Webike, very happy. View detail
Fits: YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA XSR900, YAMAHA XSR900, YAMAHA YZ85, YAMAHA MT07
Genuine Yamaha Diaphragm, Reservoir for MT07 2020
The old reservoir diaphragm was not in the greatest of condition when checking the fluid for maintenance. There was a noticible split in part of it and this is no doubt why the braking was useless on this bike. There was brake fluid seaping out of the reservoir and the owner was unsure why. This is why. I was not going to leave it like that so decided to get a brand new one from Webike. The part was easy to find using the tools Webike provide and cross referencing with Yamaha schemaics for my own assurance. The price was excellent and better than I could surce locally. Shipped with EMS all my parts arrived in 5 days from shipping. The diaphragm came in teh usual Yamaha packet and aslo inside a bubble wrap encelope for safety. The diaphragm itself is a lovely moulded piece. Very supple and maliable which is of course needed to cope with the constant preseures of the brake fluid. Not too hard to fit as it is just a straight swap out. Now all back together, the brakes now work as they should. Give it a week and I will also bleed the brakes again. Great job, thank you so much Webike, happy customer. View detail
Genuine Honda Cylinder Head for CR125R 2003
This is a friends bike that came in for a major job. The cylinder had been previously damaged with a busted piston ring and was basically beyond repair. The best option was to get a brand new Honda cylinder head and bite the bullet. The head was not too hard to find the correct part number but I was pleasantly surprised that Webike could atually get this part for me. I used the tools provided by Webike to hunt the correct part and cross referenced with Honda schematics. Although the price is pretty expensive, it is a lot cheaper than my local Honda dealer could get me a deal on. With a couple of other small parts already in my basket, I had them all shipped together with EMS. My order arrived in 5 days from shipping and all the parts were in pristine condition. The cyclinder head came in it's own Honda box and was well packed so there was no damage. The cyclinder head is a great part, it is clearly cast but that just means it is done right. The cylinder innder is machined very well and is precise to the tolerances I expected. With the other parts I had already sourced, including the piston, rings etc, the job was done in relatively good time. Now this bike has had a new lease of life and breathes again. Very happy with purchase and the service Webike proved me. Great work. View detail
Genuine Yamaha Cylinder Gasket for YZF125R 2014
This is the final part for the YZFR125 cylinder and psiton rebuild due to piston rign failure and some help for the owner of the bike. This part was the cylinder gasket. The original gasket was in good shape but still, why reuse when Webike sell the new ones for not much outlay. There is no real point in changing just one part when you essentially need the whole kit to do the job right. The part was not hard to find and I used the tools Webike provide and cross referencing with Yamaha schematics. All my parts were shipped together via EMS and arrived with me in perfect condition in 5 days solid. This gasket along with the other cylinder head gasket was kept nice and flat and came on the regular Yamaha cardboard. Perfect as always. Now all the parts are here and in place I can start the big job of the rebuild and finally get this little bike back where it belongs, the open road. Thank you Webike for the great effort you put into every order. Very much appreciated. View detail