YAMAHA OEM Motorcycle parts Motorcycle CLUTCH Reviews

Filter

Write a review and get Webike Points!

Reviews

YAMAHA OEM Motorcycle parts

21 Feb 2024

V-Belt 2DP-E7641-00

Fits: YAMAHA NMAX125 NMAX ABS, YAMAHA GPD150-A NMAX155 ABS, YAMAHA GPD150-A NMAX155 ABS, YAMAHA GPD150-A NMAX155 ABS, YAMAHA GPD150-A NMAX155 ABS, YAMAHA GPD125-A NMAX ABS, YAMAHA GPD125-A NMAX ABS, YAMAHA GPD125-A NMAX ABS, YAMAHA GPD125-A NMAX ABS, YAMAHA NMAX155

Japanese Webike user

5/5

Before it shatters.

[How is it used?
The company asked me to fix the Belt because it was cut off, so I repaired it.
I was torn between KN Kikaku's Japan Reinforced Belt Series (https://www.webike.net/sd/23107471/) and DAYTONA's Reinforced V Belt (https://www.webike.net I was torn between KN Kikaku's Japan Reinforced Belt Series () and DAYTONA's Reinforced V Belt (/sd/22752243/), but the price was the same as OEM, so I chose YamahaOEM for its reliability and peace of mind.

Was the one you received as per Image?
It was in the usual Yamaha bag.

How was your experience with it?
It's OEM and should last about 20,000 km.

[Included Parts:were they on?
Not particularly

[Was there anything that disappointed you?
Nothing in particular, because we are OEM.

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The face should be degreased to avoid slipping of the mounting point and hang→. Also, the belt has a direction of rotation, so be sure to check the direction of rotation before installing the belt. The direction of rotation is sometimes a problem when you are assembling in a brain-dead state.
Since you are opening the cover and replacing the belt, you should replace the slide piece and the roller at the same time to avoid having to do it twice. View detail

YAMAHA OEM Motorcycle parts

20 Feb 2024

Prate, Flixion 341-16321-13

Fits: YAMAHA XS650B, YAMAHA XS650, YAMAHA XS650D, YAMAHA XS650SE-11, YAMAHA XS650SE, YAMAHA XS650E-006, YAMAHA XS650E, YAMAHA XS650_2F, YAMAHA XS650SF, YAMAHA XS650F, YAMAHA XS650SG, YAMAHA XS650G, YAMAHA XS650SH, YAMAHA XS650H, YAMAHA XS650SJ, YAMAHA XS650SK, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1, YAMAHA R1

skooby

5/5

Genuine Yamaha Clutch Friction Plate for FJ1200 1992

This was one of those jobs that was desparately wanted doing as this clutch has been needing attention for quite a while now. Time for the new clutch plates to sort it out completely. This order was for the friction plates, I purchased the full set of these along with the steel plates for the full overhaul. I was very pleased to see that Webike could actually get these for me. The price was really good and for the set was far better than I could source locally here in the UK. As I already had a few other parts in my basket waiting to checkout, this cut down the shipping and spread it across all the parts. All arrived in tact and perfect condition in less than a week via EMS fast service. Webike packed all my items out securely and with some additional bubble wrap. 100% perfect when I got them. Not really bought many clutch plates for this model Yamaha but when I do, I always go for the genuine ones which I know will work exactly as they should. At this price, it would be foolish not to buy genuine. The tolerances for each plate was the same as the specs in the manual. There was no oiliness or contaminants so these were good to fit. You do not have to soak these friction plates but adding a little oil to the other steel plates is a good idea. Fitted pretty easily and quickly and now ready for the season ahead. Thanks Webike, great job. View detail

YAMAHA OEM Motorcycle parts

28 Dec 2023

Slider 4HC-17653-00

Fits: YAMAHA YP250 MAJESTY, YAMAHA YP250 MAJESTY, YAMAHA YP250 MAJESTY, YAMAHA YP250 MAJESTY, YAMAHA YP250 MAJESTY, YAMAHA YP250 MAJESTY, YAMAHA YP250 MAJESTY, YAMAHA YP250 MAJESTY, YAMAHA YP250 MAJESTY, YAMAHA YP250A MAJESTY ABS, YAMAHA YP250A MAJESTY ABS, YAMAHA YP250A MAJESTY ABS, YAMAHA YP250A MAJESTY ABS, YAMAHA YP250C MAJESTY C, YAMAHA YP250C MAJESTY C, YAMAHA YP250C MAJESTY C, YAMAHA YP250C MAJESTY C, YAMAHA YP250C MAJESTY C, YAMAHA YP250C MAJESTY C, YAMAHA YP250C MAJESTY C

Japanese Webike user

4/5

MAJESTYCBeltMaintenance

I think it is a periodic replacement part, but there is no Manufacturer's instruction. View detail

YAMAHA OEM Motorcycle parts

28 Dec 2023

Cam 4HC-17623-00

Japanese Webike user

4/5

MAJESTYCBeltMaintenance

My impression is that this is a design policy that intentionally reduces strength and does not put a burden on other components, although it increases the frequency of replacement, as a personal opinion. View detail

YAMAHA OEM Motorcycle parts

28 Dec 2023

Weight 4HC-17632-00

Japanese Webike user

4/5

MAJESTYCBeltMaintenance

OEM parts to check durability View detail

YAMAHA OEM Motorcycle parts

23 Dec 2023

Spacer 1 4HC-17654-00

Japanese Webike user

4/5

MAJESTYCBeltMaintenance

Nothing in particular for MinorParts View detail

YAMAHA OEM Motorcycle parts

03 Dec 2023

Nat. 90179-20010

Fits: YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09

skooby

5/5

Genuine Yamaha Nut for Front Sprocket on FZ6

This was a replacement front sprocket nut I needed after replacing the front and rear sprockets and chain. The old nut was a little worse for wear and had gotten a bit chewed up with removal and reinstalling over a few times. These are not supposed to last multiple removals. Finding the correct part was not hard as I just used the toosl Webike provide and cross reference with Yamaha schematics sections. The price from Webike was excellent. I alreayd had a few other parts for purchasing so got them all shipped toghether which also saved a few pounds. My package arrived safely and everything was intact. The nut is very well made and very clean on the threads. Went on nice and smoothly. Veyr pleased witht he outcome and well worth buying a new one after 2 removals to be safe. View detail

YAMAHA OEM Motorcycle parts

03 Dec 2023

Plate, Cratsch 2 2H7-16325-00

Fits: YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA BOLT, YAMAHA BOLT, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA BOLT, YAMAHA BOLT, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES

skooby

5/5

Genuine Yamaha Clutch Steel Plates for YZF-R1 2002

This was one of those jobs that was desparately wanted doing as this clutch has been needing attention for quite a while now. Time for the new clutch plates to sort it out completely. This order was for the steel plates, I was very pleased to see that Webike could actually get these for me. The price was really good and for the set was far better than I could source locally here in the UK. As I already had a few other parts in my basket waiting to checkout, this cut down the shipping and spread it across all the parts. All arrived in tact and perfect condition in less than a week via EMS fast service. Webike packed all my items out securely and with some additional bubble wrap. 100% perfect when I got them. Not really bought many clutch plates for this model Yamaha but when I do, I always go for the genuine ones which I know will work exactly as they should. At this price, it would be foolish not to buy genuine. The tolerances for each plate was the same as the specs in the manual. There was no oiliness or contaminants so these were good to fit. I always add a little oil to the steel plates to help with fitting. Fitted pretty easily and quickly and now ready for the season ahead. Thanks Webike, great job. View detail

YAMAHA OEM Motorcycle parts

13 Sep 2023

Plate, Frixillon 4H7-16321-02

Fits: YAMAHA FZ750N, YAMAHA FZ750U, YAMAHA FZ750U, YAMAHA TDM850, YAMAHA TDM850, YAMAHA TDM850, YAMAHA TDM850, YAMAHA FZ-6 (FZS6V), YAMAHA FZ-6 (FZS6VC), YAMAHA FZR1000A, YAMAHA FZR1000AC, YAMAHA FZR1000B, YAMAHA FZR1000BC, YAMAHA FZR1000D, YAMAHA FZR1000DC, YAMAHA FZR1000E, YAMAHA FZR1000EC, YAMAHA FZR1000F, YAMAHA FZR1000FC, YAMAHA FZR1000G

skooby

5/5

Genuine Yamaha Clutch Friction Plates for FZR6 2014

Time for some new clutch plates to help complete this part of the overhaul. This order was for 2 of the clutch friction plates, I did not purchase the full set of these as it was clear that only 2 were needed. I was very pleased to see that Webike could actually get these for me. The price was really good and for the set was far better than I could source locally here in the UK. The other steel plates were already in my basket along with the new springs and this meant ordering them all together actually cut down on the shipping per item. I do use EMS for the delivery as they just get the order delivered quickly. Arrived in less than a week. All the plates were packed really well and extra bubble wrap was added to the box to fill any space. Everything arrived in one piece with zero damage. No point in trying to save money and getting after market clutch plates as they don't last as long as OEM ones. The plates had a nice sharp but not dangerous macinging on them and very precise and perfectly to the tolerances on the manual. Fitted really well and pretty quickly, ready for the season. Thanks Webike, great job. View detail

Gas kettle, Crank case Cover- 2 1RC-15461-00

YAMAHA OEM Motorcycle parts

15 Jun 2023

Gas kettle, Crank case Cover- 2 1RC-15461-00

skooby

5/5

Genuine Yamaha Gasket Crank Case Cover 2 for MT09 2020

I needed this for a 2020 Yamaha MT09 I have got in my garage. This is a crank case cover gasket number 2. Also I had to change the actual crank case for this too so a new gasket was a good purchse. The part number was found using the methods I generally use, either the help pages that Webike supply or direct to the manufacturer websites etc. I found the price of these was really good and better than I could source locally here in the UK, just like the other gaskets. As this was part of a larger order with many other Yamaha parts, the shipping worked out to be briliiant. Everything was very well packed and arrived via EMS within a week of ordering. All the empty space was filled with air pockets and bubble wrap. Most of the parts were packed in the genuine OEM packaging anyway. Webike even taped the outer box to ensure, nothing could fall out or escape during transit. The parts all arrived in perfect condition. The gasket was kept nice and flat and did not suffer any bends or mishapen in any way. This is an essential gasket so I had to take a little care in fitting it. Didn't take too long and everything was back together and ready for firing up. The gasket fits perfectly and along with the new crank case, that is one more thing finished off. Very happy with the result. Thanks Webike for your hard work. It really is appreciated. View detail

YAMAHA OEM Motorcycle parts

01 Jun 2023

Oil Seal(3Y1) 93102-14209

Fits: YAMAHA XT250, YAMAHA XT250G, YAMAHA XT250, YAMAHA XT250H, YAMAHA XT250J_198, YAMAHA XT250J, YAMAHA XT250K, YAMAHA XT250K, YAMAHA XT250L, YAMAHA XT250L, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY

Vishwa Kau

5/5

Yamaha OEM Oil SEAL Replacement Effort

I'm going to install this new OEM OIL SEAL ON MY 1987 TW200.This OEM oil seal is located under the clucth lifter arm on the left side of the crankcase. First I had to drain the oil first then remove the left side cover (stator side) from the engine .Need to remove the clutch cable from the clutch lifter arm side..pull back the rubber clutch cable cover and loosen the clutch cable adjuster nuts with 12mm wrench.After removing the clutch cable from the clutch lifter arm ,loosen the clutch lifter arm stopper screw with #2 phillips screwdriver.remove the clutch lifter arm stopper screw and washer.remove the clutch lifter arm.Now I can Clearly see the older oil seal.before removing the older oil seal first I have to remove the snap ring with snap ring pliers.remove the older oil seal with a flat screwdriver.drive in the new seal with a suitable driver or socket that has the seam outside diameter as the seal.Install the snap ring into its groove with snap ring pliers. lubricate the clutch lifter arm upper portion with lithium soap based grease and lower portion of the clutch lifter arm apply fresh engine oil.Insert the lifter arm into the crankcase.Fit the spring into place on the lifter arm.Install the stopper screw with a washer so that it fits into the top groove of the lifter arm shaft.Tighten the stopper screw to 12NM/8.7 FT-LB.PUT BACK the left side cover and the clutch cable.don't forget to add fresh engine oil ,You 're Done.I do lot of stuff my self when its come to repair.DIY or Pay Someone smarter.As usual package arrived on time and neatly packed .WEBIEK High Quality Packaging right there. I have been purchasing lot of parts from the webike store a very long time. never had a problem. Webike Shop Provide Great Coustomer service That's TOP Notch.Great Communication and Smooth Transaction. WEBIKE SHOP way Beyond 5star.Thank You So Much!!! Happy Coustomer Right Here. View detail

YAMAHA OEM Motorcycle parts

16 May 2023

V-Belt 2DP-E7641-00

skooby

5/5

Genuine Yamaha Drive belt for NMAX 125 2016

The original belt was a little worse for wear and was slipping due to extreme stretching. Obviously, this was a part that was desperately needed. I found the correct part by cross referencing the Yamaha schematics and Webike help tools. Webike had these at a really good price and better than I could source locally. Along with a few other parts, the shipping was spread out over the whole order, great value. Delivered to my door in 5 days. All very well packed and the belt even came in it's own pack. No problems with anything. The belt is a strong one and this is exactly how it should be. Fitting was a little tricky but once in place, the difference is massive. The bike runs a lot better now and accelerates exactly as it should. Thank you Webike for all your help. View detail

YAMAHA OEM Motorcycle parts

13 Apr 2023

Plate, Frixillon 5XC-16321-00

Fits: YAMAHA WR250F (WR250FF), YAMAHA WR250F (WR250FG), YAMAHA WR250F (WR250FH), YAMAHA WR250F (WR250FJ), YAMAHA WR250FK

skooby

5/5

Genuine Yamaha Clutch friction plates For WR250F 2018 model

This was a job that was needed doing as the clutch has been playing up for quite a while now. Time for the new clutch plates complete. This order was for the friction plates, I purchased the full set of these. I was very pleased to see that Webike could actually get these for me. The price was really good and for the set was far better than I could source locally here in the UK. As I already had a few other parts in my basket waiting to checkout, this cut down the shipping and spread it across all the parts. All arrived in tact and perfect condition in less than a week via EMS fast service. Webike packed all my items out securely and with some additional bubble wrap. 100% perfect when I got them. Not really bought many clutch plates for off roaders but when I do, I always go for the genuine ones which I know will work exactly as they should. At this price, it would be foolish not to buy genuine. The tolerances for each plate was the same as the specs in the manual. There was no oiliness or contaminants so these were good to fit. You do not have to soak these friction plates but adding a little oil to the other plates is a good idea. Fitted pretty easily and quickly and now ready for the track. Thanks Webike, great job. View detail

YAMAHA OEM Motorcycle parts

13 Apr 2023

Plate, Cratsch 2 5NL-16325-00

Fits: YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F 50TH ANNIVERSARY, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250FB, YAMAHA YZ250FB, YAMAHA YZ250F, YAMAHA YZ250F

skooby

5/5

Genuine Yamaha Clutch plates For WR250F 2018 model

This was the second part of the clutch replacement job that was needed doing as the clutch has been playing up for quite a while now. Time for the new clutch plates complete. This order was for the clutch plates, I purchased the full set of these. I was very pleased to see that Webike could actually get these for me. The price was really good and for the set was far better than I could source locally here in the UK. The other friction plates were already in my basket and this meant ordering them all together actually cut down on the shipping per item. I do use EMS for the delivery as they just get the order delivered quickly. Arrived in less than a week. All the plates were packed really well and extra bubble wrap was added to the box to fill any space. Everything arrived in one piece with zero damage. No point in trying to save money and getting after market clutch plates as they don't last as long as OEM ones. I always add a little oil before fitting the steel plates as it just makes things easier. Fitted really well and pretty quickly, ready for the season. Thanks Webike, great job. View detail

YAMAHA OEM Motorcycle parts

12 Apr 2023

Plate, Frixillon 5XC-16321-00

Fits: YAMAHA WR250F (WR250FF), YAMAHA WR250F (WR250FG), YAMAHA WR250F (WR250FH), YAMAHA WR250F (WR250FJ), YAMAHA WR250FK

skooby

5/5

Genuine Yamaha Clutch friction plates For WR250F 2018 model

This was a job that was needed doing as the clutch hasbeen playing up for quite a while now. Time for the new clutch plates complete. This order was for the friction plates, I purchased the full set of these. I was very pleased to see that Webike could actually get these for me. The price was really good and for the set was far better than I could source locally here in the UK. As I already had a few other parts in my basket waiting to checkout, this cut down the shipping and spread it across all the parts. All arrived in tact and perfect condition in less than a week via EMS fast service. Webike packed all my items out securely and with some additional bubble wrap. 100% perfect when I got them. Not really bought many clutch plactes for off roaders but when I do, I always go for the genuine ones which I know will work exactly as they should. At this price, it would be foolish not to buy genuine. The tolerances for each plate was the same as the specs in the manual. There was no oiliness or contaminants so these were good to fit. You do not have to soak these friction plates but adding a little oil to the other plates is a good idea. Fitted pretty easily and quickly and now ready for the track. Thanks Webike, great job. View detail

YAMAHA OEM Motorcycle parts

31 Mar 2023

Klatschbos Assembly 4C8-16370-11

Fits: YAMAHA YFZ-R1, YAMAHA YFZ-R1 (YZFR1WC)

skooby

5/5

Yamaha YZF-R1 2007 Clutch Boss Assy

I very rarely have to change out clutch boss fitments but it is becoming more frequent with older bikes coming in now, These parts are not really ones that break without something going horribly wrong inside the clutch. Or, someone has tried a DIY job and not got everything in the right place. Yes, this also happens woth age and as this bike is a 2007 model, it really is a good time to change it out. A new part it is then. I found the right part by using the help pages Webike provide and the links to top manufacturers. I also cross referenced just in case there were any variants I needed to be aware of. The price of the assay was really good and a heck of a lot better than I could get from the UK. This part was included with other parts I needed for other jobs. Because of the multiple parts in my order, the shipping cost was spread nicely across all of them and worked out really good value. My go to courier these days is EMS fast service, they do deliver in quick time and my order was sat at my door on the 5th day after ordering. All the parts in my order were nicely packed and any empty space was filled with bubble wrap and air pockets. I did like how they wrapped this clutch boss with a bit of other bubble wrap. Although these parts do take a beating, you really don't want to receive a damaged part before you start. No chance of that here, Webike do an excellent job packaging everything very well. The assy is a work of art and it's just a pity no one will hardly ever see it. The finish is smooth with no sharp edges, each of the sides are perfectly machined. Really impressive part. I had already stripped down the clutch so this was just a simply replace and bolt back in. The clutch friction and steel plates that were removed were in remarkable condition and did not need replacing anyway, These were already set out in order so it was just a case of reversing for fitment. The final result was a clutch that worked as it should. All ready for the upcoming track season. Happy customer. Thank you Webike for the great service. View detail