Reviews
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1, YAMAHA R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA YZF-R6 W/ FLAMES, YAMAHA YZF-R6 W/ FLAMES, YAMAHA YZF-R6, YAMAHA YZF-R6
Replaced with a new part
My first purchase from your site... Shipping was good and very fast, I used EMS... Well packed and everything arrived fine!!! Original products in original packaging in the best quality!!! Thank You Webike!!! View detail
Fits: YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA MT10, YAMAHA MT10
Genuine Yamaha Throttle Cable Clamp for YZF-R1 2020
This was bothering me as it was missing for some reason when this bike came in for a service. Yes, it is a simple throttle cable clamp that holds in place going under the front tank but I wanted to add one back. Finding the part was a little tricky but managed to track it down using Yamaha schematics. With a couple of other small brackets and bolts for this bike, I had them all shipped using EMS and my order arrived in 5 days. The packaging for the whole order was excellent and no damage to anything. The clamp came in the Yamaha packet and was inside a bubble wrap envelope. The clamp is well made and fits the shape precisely. The small bolt hole is perfect and aligns as it should. It is finished in the standard satin black Yamaha paint. Job sorted and now my ocd is at rest. Very pleased for a small price. Thanks Webike. View detail
Fits: YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6 WORLD GP 50TH ANNIVERSARY, YAMAHA YZF-R6 WORLD GP 50TH ANNIVERSARY, YAMAHA YZF-R6, YAMAHA YZF-R6
Genuine Yamaha Grip Assy for YZF-R1
This is a replacement for the stock throttle grip that needed changing. I was going to initially just change the grip itself but for the price of this assy I decided why not just get the whole part direct. And, with it being a genuine Yamaha part, I know it's quality will be perfect. So, finding the part was not hard as I already checked Yamaha schematics for this bike. Ther price was superb and added to the basket along with a few other parts. I generally have more than one item per order as it really does cut down on the shipping costs spread through the items. I chose EMS and my order was delivered in 5 days from beiung shipped from Webike warehouse. The box was all sealed and the amount of padding inside to keep my parts safe was excellent. The grip itself came in teh standard Yamaha bag with. The grip part is nice and well, grippy, not totally smoothed out like some grips you can buy. You can really feel the friction when using it. The rubber is nice and soft but it seems like it has been bonded to the throttle tube so it is not coming off in a hurry. What else can I say, Yamaha OEM part and the quality is fantastic. Very happy and looks great once fitted. Thanks Webike View detail
Fits: YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6 WORLD GP 50TH ANNIVERSARY, YAMAHA YZF-R6 WORLD GP 50TH ANNIVERSARY, YAMAHA YZF-R6, YAMAHA YZF-R6
Used in DF200 DJEBEL
It's not the OEM DF200 DJEBEL.
It is a bit complicated, but I installed it on a DF200 DJEBEL with a TM28SScarburetor on a DJEBEL250.
The SEA BASS OEM grips have the throttle cone and grips integrated into one piece, making it difficult to install the grips heater. This is very useful for the Large size.
View detail
Fits: YAMAHA RZ350, YAMAHA FZR400RR, YAMAHA FZR400RR, YAMAHA FZR400RR-SP, YAMAHA MT250 MT-25, YAMAHA MT250 MT-25, YAMAHA MT320 MT-03, YAMAHA MT320 MT-03, YAMAHA MTN250 MT-25, YAMAHA MTN250 MT-25, YAMAHA MTN250-A MT-25 ABS, YAMAHA MTN250-A MT-25 ABS, YAMAHA MTN320 MT-03, YAMAHA MTN320 MT-03, YAMAHA MTN320-A MT-03 ABS, YAMAHA MTN320-A MT-03 ABS, YAMAHA RZ250, YAMAHA RZ250, YAMAHA SRV250S, YAMAHA SRV250
Genuine Yamaha nuts for MT03
These nuts were some spares I was looking for for various Yamaha models as they do come in handy for all sorts of areas. With some other parts for this bike the cost of shipping by EMS was great. Delivered to my door in 5 days with no messing around. Everything was well packed out inside the box and any smaller parts were protected in bubble wrap as required. These nuts are not particualrly special although they are a very fine thread. Not really much I can say about these nuts, they are a generic size but the threads are really clean and free from any debris which could cause issues.Thank you Webike. View detail
Fits: YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6 WORLD GP 50TH ANNIVERSARY, YAMAHA YZF-R6 WORLD GP 50TH ANNIVERSARY, YAMAHA YZF-R6, YAMAHA YZF-R6
Linear response to Accelerator operation
[How is it used?
Mounted on MT-07
Was the one you received as per Image?
It's OEM, so it's just like the Image.
Was the installation difficult?
No special skill is required, but experience and solid manuals are needed to adjust throttle wires.
How was your experience with it?
It is not necessary for those who have a rough accelerator operation, or those who do not open the Axel all the way.
[Included Parts:were they on?
None, Grip and Throttle together.
[Was there anything that disappointed you?
I wish the color was Black.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA R6 (YZFR6SRC), YAMAHA R6S (YZFR6SV), YAMAHA R6S (YZFR6SVC), YAMAHA R6S (YZFR6SXB), YAMAHA R6S (YZFR6SXL), YAMAHA YFZ-R6S (YZFR6SW), YAMAHA YFZ-R6S (YZFR6SWC), YAMAHA YZFR6 (YZFR6R), YAMAHA YZFR6 (YZFR6RC), YAMAHA YZFR6 (YZFR6SR), YAMAHA YZFR6S (YZFR6SYB), YAMAHA YZFR6S (YZFR6SYCB), YAMAHA YZFR6S (YZFR6SYCL), YAMAHA YZFR6S (YZFR6SYL)
Genuine Yamaha Grip Assy for YZF-R6 2008
There was an issue with the throttle grip gfor this R6. I found that you cannot just buy the throttle grip tube but have to get the entire assy. Not a problem for Webike, they even stock these. I was fine with this anyway as I also needed the grip too. Happy days I found the correct part pretty easily using the Yamaha schematics. Webike price was superb and better than I could source locally. With a few other parts my order was shipped with EMS and arrived in 5 days. When I unpacked the order, all the parts were individually wrapped so there was no damage to anything. The grip assy is a really neat part and already comes assembled so there is no messing around trying to get the grip onto the throttle tube. Made my life a lot easier. The grip is super sticky, not adhesive sticky but grippy sticky. The holes for the throttle cables is cleanly cut and they went in like butter. When all fitted, you can tell it is a new set up, it is smooth as silk to twist and also looks really cool. Another happy customer, thank you Webike. View detail
Genuine Yamaha Cable Holder for V STAR 650 CLASSIC 2010
A small part that does an important job. This is the cable holder for the V Star 650 Classic that was missing when it came in. I found the part using the tools available from Webike help pages. The part was easy to find then. Although essentially, you could get away with not having one of these cable holders, why would you when you can source them easy enouhg from Webike at a great price. I had a few other parts in my order and all were shipped with EMS. The package arrived in 5 days and everything was in perfect 100% condition. The cable holder is tough plastice with a massive hole specifically for the cables to move vertically as needed. The clip grommets are perfect, all in tact and no snapped pieces or extra bits still attached from the moulding process. They clip into place really easily and with no effort. Now my cables are where they should be and no danger of anything getting tangled. Very please with how the bike looks now and this part really finished it off. The retro look is still as it should be. Thank you Webike. View detail
Fits: YAMAHA MT250 MT-25, YAMAHA MT250 MT-25, YAMAHA MT320 MT-03, YAMAHA MTN250 MT-25, YAMAHA MTN250 MT-25, YAMAHA MTN320 MT-03, YAMAHA MTN320 MT-03, YAMAHA MT320 MT-03, YAMAHA MT03
Cheaper than expected.
[How is it used?
I bought this to refresh my MT-25, which has done quite a bit of mileage.
I am totally OK with Other Brand Products, but I ended up choosing OEM because there were few other options in OEM Length and it was the least expensive.
Was the one you received as per Image?
It is a very ordinary Clutch Cable.
Nut for installation is of course included.
Was the installation difficult?
The clutch wire replacement itself is easy, as Cowl is also the smallest.
Pliers and pliers for turning Spanner and Adjuster of general sizes are sufficient.
After replacement, test run for adjustment.
How was your experience with it?
We replaced the OEM with OEM, so naturally we did not notice any difference.
It was replaced as preventive maintenance before the Wire ran out.
[Included Parts:were they on?
Nut on the Engine fixing side is included.
Don't forget to have your tools and wire grease ready.
[Was there anything that disappointed you?
Not particularly
【Review】
I thought the price would be a little higher since it is OEM Parts. I thought the price would be a little higher since they are OEM parts, but I'm glad it was less expensive than I thought it would be.
There was no particular problem with the original Clutch Wire, but it was too late to replace it after it broke.
View detail
Fits: YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6 WORLD GP 50TH ANNIVERSARY, YAMAHA YZF-R6 WORLD GP 50TH ANNIVERSARY, YAMAHA YZF-R6, YAMAHA YZF-R6
Diversion from other companies.
As you can see in the picture, the diameter is larger than OEM, so it is a little bit higher Solo.
I have only replaced it as is and adjusted the play of the Axel, but I am satisfied with it.
I feel that the rattle in the handlebar axis direction is a little too large, so I will try to reduce the rattle by using another timing.
I put some Washers in the Bar End and now I am avoiding it.
View detail
Fits: YAMAHA YZ450F MONSTER (YZ450FPME), YAMAHA YZ450F (YZ450FPL)
Used for WR250R
The Cushion for the Taper Handlebar is Large, which is good for safety, but it makes it difficult to turn the key on the WR of TRAIL vehicles.
The top Cover was torn and looked bad, so we replaced it with this one from OEM.
Although it is a small type, the rubber is quite soft and has perfect cushioning.
Also, since it is OEM, it has YAMAHA's Logo, which makes it more cohesive.
I don't know about durability, but it's half the price of a Large type Cushion, so it won't hurt if it breaks.
Installation also Tie BandQuantity:This is a simple 2pc job.
View detail
Fits: YAMAHA XMAX, YAMAHA XMAX, YAMAHA XMAX, YAMAHA XMAX, YAMAHA XMAX, YAMAHA XMAX, YAMAHA XMAX, YAMAHA XMAX, YAMAHA XMAX, YAMAHA XMAX, YAMAHA XMAX, YAMAHA XMAX, YAMAHA XMAX, YAMAHA XMAX, YAMAHA YZFR3 MONSTER (YZFR3AMME), YAMAHA YZFR3 MONSTER (YZFR3AMME), YAMAHA YZFR3 MONSTER (YZFR3AMME), YAMAHA YZFR3 MONSTER (YZFR3AMME), YAMAHA YZFR3 MONSTER (YZFR3AMME), YAMAHA YZFR3 MONSTER (YZFR3AMME)
Very good
My motorcycle is YAMAHA NMAX155, and the buckle of this car often falls off. The quality of the buckle of the auxiliary factory purchased from other websites is not good, but the accessories of the original factory are reassuring. Although it is a small accessory, the packaging of webike is very good, I am very satisfied View detail
Fits: YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT
Good original grips!
Everything is great! I take in this store is not the first time! Everything arrives on time and in secure packaging! I recommend this online store! View detail
Fits: YAMAHA AG200, YAMAHA YP250 MAJESTY, YAMAHA YP250 MAJESTY, YAMAHA YP250 MAJESTY, YAMAHA YP250 MAJESTY, YAMAHA YP250 MAJESTY
This is a standard OEM diversion.
Tell us how you use it]
This is a rubber cover for the lever lock (part number 36X-83965-00) used in the Yamaha AG200. I installed a special rubber cover because it looks like it will rust after a while of use.
Was the one you received as per Image?
The squishy Rubber cover is very flexible.
Was the installation difficult?
If the lever is OEM, I don't think it will be fiddly, but if it is an adjustable lever, it will be a bit of a pain. I use ZETA Pivot Lever CP/Clutch 4-fingers for Public Road Folding TypeClutch lever on my D Tracker, and the SpringCase protrudes on the bottom side of this lever, so the Rubber I sprayed silicon spray on the inside of the cover to make it more slippery, and then managed to push it in. Because of the protrusion, the entire rubber cover was pulled in one direction, so the belt for fixing the rubber cover also seemed to fit in a limited way.
How was your experience with it?
It was difficult to install, but so far I have not had any Gap or dislodgement while using it.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
View detail
Fits: YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6 WORLD GP 50TH ANNIVERSARY, YAMAHA YZF-R6 WORLD GP 50TH ANNIVERSARY, YAMAHA YZF-R6, YAMAHA YZF-R6
Adapted from GSX-R125
In preparation for the GSX-R125 High Solo, I bought this because I heard that the R6 can be used. The size is slightly different, so I need to put a spacer on the bar end.
The Grip is a little sticky when I received it, so I gave it a quality -1.
View detail
Fits: YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA ZUMA 125, YAMAHA ZUMA 125, YAMAHA ZUMA 125, YAMAHA ZUMA 125, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VMAX
Yamaha OEM Nut, Crown
Original nut in the rearview mirror on Yamaha YZF R1 RN12 05. The nut is screwed into the mounting of the rear-view mirror and because of this it is tightly holding a rearview mirror, does not give the rear view mirror moving. View detail
Fits: YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA XSR900, YAMAHA XSR900, YAMAHA XSR900, YAMAHA XSR900, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA MT09, YAMAHA MT09
Yamaha OEM Nut
The original nut in the windshield on the YAMAHA YZF R1 RN12 05. The quality of the nuts is excellent. I bought from you to replace my old nuts. Because they were badly worn out. If the nuts are tightly clamped, then over time, the nuts in the windshield begin to crack. The main thing is not to squeeze them strongly in the windshield. The nuts are for securing the windshield. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1
Yamaha OEM THROTTLE CABLE ASSY
The original throttle cable for YAMAHA YZF R1 RN12 05. I bought it to replace my old throttle cable. Because the old throttle cable, it broke. I also bought a gas cable in stock. View detail
Fits: YAMAHA R1, YAMAHA YFZ-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1, YAMAHA R1, YAMAHA R1, YAMAHA R1, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YFZ-R1 (YZFR1WC)
Yamaha OEM HANDLEBAR
The original handle on the YAMAHA YZF R1 RN12 05. The material is good, strong, lightweight. After the previous owner, I changed the handle, as it broke on the mounts. I installed a different handle, now everything is fine. The right stick was hard to find in the aftermarket on the YAMAHA R1. I have fallen off my motorcycle several times, the handles are strong and even. View detail
YAMAHA OEM CABLE, CLUTCH
I bought from you several times a clutch cable for a Yamaha YZF R1 RN12 05, because the cable was torn. Also available in stock. I plan to buy more in stock. View detail