Reviews
Fits: SUZUKI GSX-S750AL9, SUZUKI GSX-S750YAL9, SUZUKI GSX-S750ZAL9, SUZUKI GSX-S750ZL9, SUZUKI GSX-S750AL8, SUZUKI GSX-S750AZL8, SUZUKI GSX-S750L8, SUZUKI GSX-S750ZL8, SUZUKI GSX1300RAL9, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSX1300R, SUZUKI GSX1300R, SUZUKI GSX1300RAZ, SUZUKI DR200SE, SUZUKI GSX1300R, SUZUKI GSX1300R, SUZUKI GSX1300R
Bolt for fixing CHOINORIFootCowl
[How is it used?
FootCowl by SUZUKI/CHOINORI (Footrest) to be Bolt to fix to the Frame.
I purchased 4 OEM Parts because they were missing when I purchased the vehicle.
How was your experience with it?
OEM Parts for your peace of mind. No problem.
How did it compare to other products?
As the part number says, it is M6×16mm Bolt, so you can get it at Home centretc.
However, OEM Parts are also not that expensive, which is good.
[Points to note]
Care should be taken not to lick it with Overtorque.
View detail
Fits: HONDA C125, HONDA C125, HONDA C125, HONDA C125, HONDA CRF150R, HONDA CRF150R, HONDA CRF150R, HONDA CRF150R, HONDA CRF150RB, HONDA CRF150RB, HONDA CRF150RB, HONDA CRF150RB, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R
Torque rod replacement
GPX Popz125
I purchased this to replace a Torque rod.
The rubber washer that was originally attached to the bolt had deteriorated and cracked. When the bolt was tightened, it turned too much and the screw threads of the bolt became worn and had to be replaced all together.
Sizec. was no problem, and I was able to install it.
I used the product for a few days with the original Bolt on it until it arrived, so I'm replacing it.
I had a Trouble with a screw thread that was licked by Timing and would not come off! I had a trouble that I could not remove the screws due to the licked screw threads, but I removed them with a Gold saw from Daiso.
▼ Purchases
Rubber, Stotspar Arm Kutsi 43434-286-000
BoltA, Brake Stotspar 92811-10000
Washer 8MM 90505-425-000
Nut, 6 kaku 8MM 94001-08000-0S
We did not purchase PinSplit this time, so we used the same one as before, but the shape did not fit slightly, so we plan to purchase additional ones.
View detail
Fits: SUZUKI Gixxer, SUZUKI Zixer(150)
Air filter installation is quite large
As an air filter, it is a very ordinary 3, but 5 is because it is affordable and very ordinary.
The replacement procedure for the pre-2020 model can be found by Googling, but the replacement procedure for the post-2020 Gixxer 150 cannot be found by Googling, so I will describe it here.
(1) Remove the in-hemp palm clamps from the harness and rubber sheet to facilitate work.
The top two are easy, and the Right Side is by turning over the Rubber sheet. The problem is the yellow color of the lower side.
?Insert and remove the Driver's shaft from the depression where it enters the Tail cover; the Screw will fall completely out and down. It is wise to pinch it with the Tweezers before it is about to come off. the ground without getting caught in the Cover or anything else when it falls out.
When the screws on the front side cannot be accessed by shifting the harness, the screws on the side cover can be removed by removing the screws, pulling them slightly toward the front, and making space for the driver to be inserted.
(5) Remove and replace the collapsed packing on the lid side and the box side as it looks like a drill, and place the air filter in the box.:Set feeling and not hooked, so I put it down.
(6) Attach the two screws with yellow color circle on the bottom of the lid side, and carefully insert the lid from the front to prevent the screws from falling off. If you have a super strong magnet driver, you may be able to put it on afterwards and insert it through the narrow gap, but it seems to be very difficult.
(7) Pattern and Quantity:Since it is not a mechanism that can be set, the screw holes must be aligned and the lid and box must be set so that the front and rear quantities are well aligned.:Pair (for Left and Right) While moving the screws to the upper side, check the position of the Screw holes and temporarily fix the upper Screw. Before and after thisQuantity:Pair (for Left and Right) You might have a pretty good hunch that shaking it up to
(8) Align the screws on the lower side with the screw holes, and insert the screwdriver through the slit as you did when you removed the screw.
Tighten the screws on the side cover and put back the inHemp palmock to finish the work.
If you do this work often, you may get used to it and be able to do it in about 20 minutes, but if you fall into a screw or some other strange place and get stuck, it is Large strange to take it out. I think it took me about an hour to do Small because I had to be very careful.
Once I do it once, I might be able to make it a little smoother next time, but it's hard to do anyway.
It is a good Element to remove it rather often, but you may not want to do this step unless you are in a desperate situation.
View detail
Fits: SUZUKI GSX-R125 ABS, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125 ABS 100th Anniversary Collar, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125 ABS
OEM Parts, so nothing is amiss.
OEM Parts, so you can be sure of the quality. It may also be cheaper than Other Brand Products. If you don't have any special requirements, we recommend you to use OEMFilter.
The driver is located in a rather troublesome place on the GSX-125Series, but it is not a problem in the sense that it is not something that needs to be replaced often. You will need to have the right tool for the job.
View detail
Fits: SUZUKI GSX-R125 ABS, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125 ABS 100th Anniversary Collar, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125 ABS
This is also consumable.
The car has reached 5,000 km on the odometer and is being replaced.
Replaced OEMAir cleaner with OEMAir cleaner as is.
If you have ever driven a car or motorcycle, you have often heard this word. Air cleaner
The engine produces a mixture of gasoline and air taken in from the outside, which is sent to the piston to drive the engine. The air needs to be filtered because there is a risk of foreign substances if it is sucked in as it is.
→Air cleaner role.
[Types of air cleaners
Dry." When Screwcass formula." There are two types of
(i) Dry." ‥
Dry filter paper or non-woven cloth is used, and when soiled, the Element can be cleaned by blowing Compressor air from the inside to the outside.
The Element is bellows-shaped with a mountain fold and a valley fold, but since more dirt accumulates in the valley portion when viewed from the intake side, Dust may pop out on the Sheng Large when air blowing.
→GSX-R125 is this Type.
(2) Screwcass formula." ‥
Like Sponge Element filter oil, the oil on the surface of the element adsorbs even the smallest dust particles, but since the oil is blown away by air blowing, cleaning is prohibited in principle. When the time comes to replace the oil, we will replace it without hesitation.
Do I need to replace the air cleaner?
Air cleaner (Air Filter) to beautify the air entering the Carburetor or Injection./Air Element) may malfunction if not replaced in moderation.
What if the air cleaner gets dirty?
Dirty air cleaners reduce the amount of air that is sucked in, causing the engine to malfunction, resulting in reduced fuel economy and acceleration performance.
As an example, if the sponge of a wet filter is ragged, too much air will be allowed to enter, resulting in higher combustion temperatures and possibly destroying the engine.
Also, in the injection systems used in recent motorcycles, if the intake air volume decreases due to a plugged air filter element, the fuel injection volume is corrected accordingly, and the air-fuel ratio may remain unchanged. However, even if the plug is not covered, a decrease in air volume will naturally lead to a decrease in power, so the condition of the AirFilter element is still important.
How often should I change my Motorcycle's air cleaner?
The air cleaner, which removes air pollution, should be replaced after approximately 5,000 km, and driving with a dirty air cleaner can reduce fuel efficiency. 。 There are two types of air cleaners, wet and dry, and the replacement time for both types is approximately 5,000 km.
Based on the above ...
Why did you choose OEM Air cleaner again this time?
Fat:Almost no external air cleaner for GSX-R125 has been released (laugh).
There is a backdoor method for OEMs to increase intake airflow by removing the air cleaner's punching with a nipper or something, but I'm afraid of the risk (lol).
◯Fearing that the setting of →Injection, which raises the intake air volume, may become incorrect (changing the air-fuel ratio), which may affect fuel economy and driving performance.
It is not used for racing, but for touring and other main purposes.
How to exchange
Remove the Seat. You can use the Hexagonal Wrench, an automotive tool, to remove the Seat.
↓
(2) Remove the Battery. When you remove them, do so in the order of Minus→Plus.
↓
(3) Pull Fuse BOX and Wiring out of the way.
↓
Remove the lid of the Air Cleaner Box with Phillips Screwdriver.
↓
(5) Remove the old Cartridge-type air cleaner.
↓
(6) Place the new air cleaner in the box.
↓
(?) ?→? Return to the bottom in this order to complete the process. 。
[After exchange]
◎Engine blowout has been lightened. 。
◎Fuel economy also improved to 42 km→46 km.
◎Idling is also stable.
If the vehicle is equipped with a carburetor, it is possible to manage even if the intake air volume is increased by applying carburetor settings, etc. But when it comes to injections, I think it is not possible to cheat because they are very precise.
The AirFilter element→ is just as important for motorcycles as the mask for people. It is true that more intake air = more power, but I think it is necessary to be aware of the risks associated with this.
View detail
Fits: HONDA C70, HONDA C70, HONDA C70, HONDA C70, HONDA C70, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
Great part
Genuine Honda part, and new. It has beautiful finish. Reliable. It met my need for a well-made replacement part. Fits, perfectly, in the my motorcycle. I recommend it. View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
Reliable OEM Product
[How is it used?
I bought a used CBR600RR PC40 and after riding it for over 2 years, I decided it was time to replace it, so I looked at the Parts List.
How was your experience with it?
The fit is perfect and secure.
Since it was the first replacement, we removed most of the cowls and tank covers and accessed the air cleaner box.
Remove the Screw of the Air Cleaner BOX, and then remove the Quantity of the Air cleaner element.:Remove the 2pc Screws. Be careful not to drop them into the Throttle body at that time.
All I had to do was replace it by following the same procedure. It was my first time working with Smooth, but I was able to replace it with Smooth using only information from Net.
However, after 2 years and 10,000 km, the air cleaner was not too dirty before replacement.
How did it compare to other products?
[Points to note]
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650R
Securely mounted.
[How is it used?
The front suspension of a VTR1000SP-2 I recently purchased from an acquaintance was converted to an SC59 CBR1000RR. The front fender was forcibly installed from a VTR1000SP-2.
I bought this item to install a Front Fender for my SC59 CBR1000RR.
Was the one you received as per Image?
Insert the Grommet into the mounting hole of the Front Fender. The collar with the brim is then inserted and bolted to the front fender. The OEM parts are very well thought out.
How was your experience with it?
The usual HondaOEM Parts arrived. There is no doubt about it.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It feels good to properly combine and install these parts.
View detail
Fits: HONDA C125, HONDA C125, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650R
Refresh
[How is it used?
The front suspension of a VTR1000SP-2 I recently purchased was converted to an SC59 CBR1000RR. The front fender was forcibly installed from a VTR1000SP-2.
I bought this item to install a Front Fender for my SC59 CBR1000RR.
Was the one you received as per Image?
Insert it into the mounting hole of the Front Fender. A collar with a brim is then inserted and bolted to the front fender. The OEM parts are very well thought out.
How was your experience with it?
The usual HondaOEM Parts arrived. There is no doubt about it.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Rubber-based parts deteriorate, so it's a good idea to replace them periodically. They also protect the parts, so it is better to replace them before they stop functioning.
View detail
Stable OEM Parts
[How is it used?
Air Filter was replaced together with SUZUKI/CHOINORI during CarburetorO/H.
The originally attached Filter was marginal because it fell apart when I touched it with my fingers.
How was your experience with it?
The OEM parts have been used without any problems.
The price is low, so if you haven't changed it, you should.
How did it compare to other products?
CHOINORI has a small number of Other Brand Products, but OEM Parts are not discontinued, which is helpful.
[Points to note]
This Filter is wet type, so it is necessary to moisten the Oiletc. during installation.
But be careful not to put too much on, as it will drip through the gaps in the FilterBox.
View detail
Fits: HONDA PCX150, HONDA WW150 AC
Genuine Honda Air FIlter for PCX150 2012
New air filter needed for this baby of a bike. I have had other air filters before and not been overly impressed. Decided to go for stock genuine Honda for a change. Finding the correct part was simple and I used the help pages Webike provide and cross referenced with Honda schematics to confirm. The price was really good for a genuine Honda and as I had other items in the order, the shipping was cushioned somewhat and very reasonable. Delivered by EMS standard within a week of placing the order. After removing most of the top body work, the air filter is relatively easy to install, it's putting everything back which is a pain. The filter itself looked really good and a proper piece of Honda kit. Very happy with this item. Thank you Webike View detail
Fits: HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
For CB250F
About quality and texture genuine productAbout quality and texture Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging View detail
Fits: HONDA XR250, HONDA XR250, HONDA XL600V, HONDA XL600V, HONDA XL600V, HONDA XL600V, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S
CB250F MUFLER PROTECTED RUBBER
This is used to protect the bend in case of any shock Genuine product -Rubber, FrontFender Mau 61103-357-000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
Fits: HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90
Recommendation to Power up with a safety margin
I recently changed my carburetor to a PB16 and went from Powerful to a 90for OEM air cleaner.
At that time, I only had an OEM 50 air cleaner box on hand, and the size of the Element and the box did not match, so I replaced it with a 90 OEMAir cleaner box.
What is Air cleaner box?
But after all the bore ups and high camshafts and stuff, why go back to the air cleaner box?"
The reasons are as follows.
What does the air cleaner box do?
The air cleaner box prevents rainwater, dust, or dirt from entering the air cleaner.
The box enclosure also has the merit of reducing the noise generated by the air cleaner and stabilizing the air delivered to the carburetor.
[Merit]
◎Filters air and is designed to prevent moisture from entering the box even on rainy days, so clean and stable air can be sent to the Carburetor. 。 Depending on the geometry, the feeRing changes slightly when re-accelerating. (In extreme cases, some people make their own air cleaner boxes.)
[Demerit]
Custom vehicles suffer from a lack of power due to the fixed amount of air intake. For this reason, many custom vehicles are equipped with power filters and other products from other brands.
The effect of the air cleaner box.
Air Chamber effect.
It regulates air temperature and rectifies airflow." In short, it is an effect to send air within a certain range to the Engine without causing sudden changes in air pressure or temperature by temporarily storing air that has been taken in.
→ Thanks to this effect, you can ride in summer or winter, sunny or rainy, without carburetor setting.
Effect as an intake pipe
The ...box itself plays an important role as an intake pipe.
Long intake pipe = Air cleaner box
The RPM generated by the →LargeTorque will be lower. 。 Removing the intake pipe = Power Filter
→The RPM generated by the most LargeTorque is increased, and the low-speed Torque is weakened. ▲ The combustion state also changes as the Engine characteristics change, and at certain RPMs the combustion temperature is higher than NORMAL, shortening the Engine's life.
After installing the air cleaner box
Torque seemed to have been physically Torque seemed to have been physically Torque seemed to have been physically Torque seemed to have been physically Torque seemed to have been physically Torque up up 。
Idling, of course, has become quieter while driving and I can hear the Engine better.
I ran it on a rainy day to test it out, and the Engine was stable without any squeaking.
Carburetor setting was done with a box, and it ran with the same setting from summer to winter, but no setting change was necessary.
? No exuberant acceleration toward high rpm.
→Mild means.
Removing the air cleaner box, like the power filter, will increase the intake air volume, so the engine power itself will increase.
However, even if this Power goes up, it is not possible to ride on rainy days, or it is necessary to re-carburetor setting in summer and winter.
Almost maintenance-free in the box, same setting throughout the year, but power is there.
I think it depends on where you want to go.
I used to enjoy the peppy performance, and I also felt the benefit of having the Power Filter attached (lol), so I can sympathize with you on that!
But recently I've been wanting to ride more comfortably and anytime, so I've become a more stable BoxSpec.
For reference as an option.
View detail
Fits: SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125L, SUZUKI DR-Z125L, SUZUKI DR-Z125L, SUZUKI DR-Z125L, SUZUKI DR-Z125L, SUZUKI DR-Z125L
Genuine Suzuki Air Filter for DR-Z125 2015
This was a part that needed changing on the DR-Z125 bike that came in for a service. The air filter was pretty bad and very dirty which was only having a negative effect on the bike's running. The correct air filter was easy to find using the tools and help section on Webike pages. I also cross referenced with Suzuki schematics for my own peace of mind. The air filter was really good value and slightly cheaper than I could source locally at my nearest Honda parts dealer. I chose EMS for my courier as they just get my orders delivered fast. 5 days from shipping my order arrived. Everything in the order was extra well packed with bubble wrap for security. The air filter is not a massive one especially for such a small bike but you do need it to fit as it should. The old one had gotten a little funny shaped asn was not sitting right. This one however, fits perfectly. The air filter came in the usual Honda packaging. Fitting is easy, the filter is not doing what it is supposed to do and the bike does sound better for it. Brillaint work Webike. Happy customer. View detail
Fits: SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI GSX1300R, SUZUKI GSX1300R, SUZUKI GSX1300R, SUZUKI GSX1300RAZ, SUZUKI GSX1300R, SUZUKI GSX1300R, SUZUKI GSX1300R, SUZUKI GSX1300R, SUZUKI GSX1300RAL9, SUZUKI Hayabusa GSX1300R
Genuine Suzuki Air Filter for GSX1300R Hayabusa
New air filter needed for this monster of a bike. I have had other air filters before and not been overly impressed. Decided to go for stock genuine Suzuki for a change. Finding the correct part was simple and I used the help pages Webike provide and cross referenced with Suzuki schematics to confirm. The price was really good for a genuine Suzuki and as I had other items in the order, the shipping was cushioned somewhat and very reasonable. Delivered by EMS standard within a week of placing the order. After removing most of the top body work, the air filter is relatively easy to install, it's putting everything back which is a pain. The filter itself looked really good and a proper piece of Suzuki kit. Very happy with this item. Thank you Webike View detail
Genuine Yamaha Air Filter for MT09 2017
New air filter needed for MT09 2017 model. I have had some other aftermarket air filters before and not been overly impressed. Decided to go for stock genuine Yamaha for a change. This part has already been superseded so should be pretty good. The price was really good for genuine Yamaha and as I had other items in the order, the shipping was cushioned somewhat and very reasonable, Delivered by EMS and arrived in 5 days of placing the order. After removing most of the top body work, the air filter is relatively easy to install, it's putting everything back which is a pain. The filter itself looked really good and a proper piece of Yamaha kit. Everything is nice and well manufactured as you would expect from a stock part. The fins are even and no signs of any disturbance. Overall, a really nice looking air filter. Very happy with this item. Thank you Webike View detail
Fits: HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90
CUB90OEMTube
Purchased with Bore up of CUB.
I wanted to use the OEM Air cleanerBox, but the CUB50OEM had a small intake diameter, so I changed to this one.
The length of the tube itself remains the same, but the diameter is considerably larger.
View detail
Beautiful part
Excellent new and genuine Honda part. 8x100 flanged screw in excellent condition. Robust part, with beautiful finish and intact. The product was very well packaged, in a cardboard box, as well as sealed and stored with bubble wrap and air. Delivery in satisfactory time. I highly recommend it. View detail
Fits: HONDA VT750C2F, HONDA VT750C2F, HONDA VT750C2F, HONDA VT750C2F, HONDA VT750C2F, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VF750CD
FOR CB250F
.Actually this item i could not found in my country (carburettor air breathing filter). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail