Reviews
![Screw Flat 4X12 [93600040120G]](https://img.webike-cdn.net/catalogue/images/102641/93600040121G_TS.jpg)
Fits: HONDA CB500X, HONDA CB500F, HONDA CB150R, HONDA CB300R, HONDA REBEL1100, HONDA REBEL1100, HONDA REBEL(-1999), HONDA REBEL(-1999), HONDA REBEL(-1999), HONDA REBEL(-1999), HONDA REBEL(-1999), HONDA REBEL(-1999), HONDA REBEL(-1999), HONDA REBEL(-1999), HONDA REBEL(-1999), HONDA REBEL 500, HONDA REBEL 500, HONDA REBEL 500, HONDA REBEL 250, HONDA REBEL 250
Screw of master cylinder cap
I have a Screw for FBrake's Master cylinder cap,
This is a replacement for a Rust that was out.
It is OEM Product, so there is no problem.
View detail
Fits: HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S
O-ring of Oil drainCap
I was looking for a good replacement, so I bought it.
The OEM Product is inexpensive, so it is sufficient.
View detail
Fits: HONDA TLR200, HONDA TLR200, HONDA TLR200, HONDA TLR200, HONDA NX650, HONDA NX650, HONDA NX650, HONDA NX650, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA NX250 AC, HONDA NX250 A, HONDA NS50F A
Speedometer Cable Set Screw
This Screw was hard and did not turn when the Tire was replaced before, and was slightly tarnished.
With the FCB400TOverhaul, we used the Impact Driver to remove it this time.
It is not impossible to reuse it, but I had to replace it because it would cry if it stuck again.
It's inexpensive and there's nothing wrong with it.
View detail
Fits: HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000D, HONDA CRF1000D
Oil level gauge O-ring
I was looking for a good replacement, so I bought it.
The OEM Product is inexpensive, so it is sufficient.
View detail
Fits: HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA VFR750F
Side cowl fixed
Side cowl fixed bolt is replaced with a new one.
You will receive a replacement part number:64508-ML7-010.
It seems to be a common part with different part numbers.
The tightening part is still -.
I hope they will sell ?.
View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
Neither good nor bad
After driving about 20,000 km in 3 years since replacing the external suspension, I felt that it was worn out, so I replaced the external suspension with an OEM Rear Suspension instead of overhauling it.
Motorcycle Rear Suspension
Rear Suspension (Rear shock) improves stability and maneuverability during riding by mainly absorbing the road surface gap. 。 To briefly introduce the structure, there is a Spring around a component called Damper, and the Damper absorbs (dampens) the impact received by the Spring, so that the Spring does not jump around forever.
[Merit of Motorcycle Rear Suspension
The impact of the impact when running can be reduced.
→ Better ride quality.
Damage to the vehicle body is also reduced. 。
In addition, suspension keeps the tire in place on the road surface by absorbing shock. 。
As a result, stable Grip can be ensured.
Of course, the Rear Suspension also has a standard life span, or replacement or overhaul.
The life of the Rear Suspension. For Motorcycle
The timings that should be considered for overhaul of the suspension are generally about 20,000km or about 2 years.
What kind of symptoms do you often hear about Rear Suspension going bad?
Downs Symptoms of Motorcycle
...Curve has become difficult to turn.
The height of the car seems to have been lowered.
... while running "Giggle." The noise is called "noise".
This may occur when symptoms such as the following appear. In such a case, it is Overhaul replacement regardless of the distance or the number of years.
I thought about replacing it because I felt the lack of convergence of the road surface Gap and the strange noise with my Case.
When it comes to replacement, I think we have two choices:external and OEM.
The characteristics of each are
Outside the Company Overhaul is possible. Expensive. Rides crisp and clear.
[OEM] The basic overhaul is not possible (but it may be cheaper to buy one). （It is hard because it is designed for tandem and loading. It is more suited for touring than for sports. Durability is higher than external ones.
I went back to OEM because the outside is Overspecifications. Durability and price were the deciding factors.
The length of normal suspension = 320mm.
Replacement is easy.
(1) Stand Center Stand.
↓
Remove one side at a time and replace one side at a time.
↓
(3) Apply Grease to the stop points of each of the Frame and Swing Arm.
after replacement
I think it's much better than the external one that was damaged.
OEM is not bad, if you use it in Touring Main.
View detail
Fits: HONDA NSR250R, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP
Replace with new one
This is a replacement along with Bolt replacement.
It is like thin Packing, but Wound-proof? Prevention of loosening? It is not cheap. It is not cheap.
View detail
Fits: HONDA CBR400RR, HONDA CBR400RR
Bolt
The Right Side fixed bolt is replaced with a new one.
It seems to have been changed to the alternative part number:64508-ML7-010, but the tightening part is still ? shaped.
I would prefer a ?-tightened shape.
View detail
Fits: HONDA NSR50R, HONDA NSR50R, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR
exchange
Side cowl demountable bolt, replaced with a new one.
I would like to have a cross, but it seems that OEM new products are changing to -.
I hope they will change to Cross Type.
View detail
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100
New installation
NutClip to fix the center cowl installed in the cowl section again, new installation.
It was helpful to be able to purchase the product from HondaOEM Product.
View detail
Fits: HONDA GL1500CF, HONDA GL1500CF, HONDA GL1500CF, HONDA GL1500CF, HONDA GL1500CF, HONDA GL1500CF, HONDA NSA700A AC, HONDA NSA700A A
Replace with new one
The installed product was out of date, so it was replaced.
I would like to replace all of them, but they are not that cheap, so I am replacing 1pc.
View detail
Fits: HONDA C125, HONDA C125, HONDA C125, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500
Replace with new one
I purchased this product to replace the fixed bolt in the Tail lamp section.
It seems to be a special Bolt, available at the same HondaOEM, and the price is reasonable.
View detail
Fits: HONDA NS-1, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR50
HRCSticker
I bought this for spare parts.
The texture of HondaOEMHRCSticker is not bad, but it is difficult to apply to curved surfaces. It is difficult to stick it on curved surfaces. If air gets in and you try to reapply it, it will tear.
View detail
Fits: HONDA NS-1, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR50
HRCSticker
HRCSticker on RearCowl side, I am repurchasing due to failure to attach.
I thought I was going to paste it so that it was nice and straight and no air would get in, but …...
I plan to repurchase, this time sticking it so it won't fail.
View detail
Fits: HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA XR70R A, HONDA XR70R A, HONDA XR80R A, HONDA XR80R A, HONDA XR80R A, HONDA XR70R A, HONDA XR100R A, HONDA XR100R A
Replace with new one
Left Side Fixed Bolt is replaced with a new one.
The price is not that much, and it helps that it is available at HondaOEMBolt.
View detail
Fits: HONDA CB1100, HONDA CB1100N, HONDA CB1100, HONDA CB1100, HONDA CB1100S
Replace with new one
The color of the footpeg section was old and was purchased to be replaced with a new one.
It was sold by HondaOEM Product, which was a great help.
View detail
Fits: HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D2, HONDA CRF1000D2, HONDA ADV150
Fixed
I purchased this product to replace the existing Tail Lamp with a new one because it was badly rusted.
It was helpful that the product was sold under the same HondaOEM Product as the installed product.
View detail
Fits: HONDA C125, HONDA C125, HONDA C125, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500
Fixing Screw
I bought it to fix the Tail lampFixing Screw on the Rear because it was missing.
HondaOEM and the price was low, so it was very helpful.
View detail
Fits: HONDA C125, HONDA C125, HONDA CB1100, HONDA CB1100N, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA NCW50, HONDA PCX150, HONDA PCX150, HONDA PCX150
OEM Product, so no problem.
Used in Overhaul of Front fork.
Other Brand Product would have been fine, but the price was almost the same.
Purchase this OEM Product.
There is no problem.
View detail
Fits: HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA XR70R A, HONDA XR70R A, HONDA XR80R A, HONDA XR80R A, HONDA XR80R A, HONDA XR70R A, HONDA XR100R A, HONDA XR100R A
Cowl fixed
I purchased this bolt to replace the left side fixed bolt, which was rusted and old.
It was helpful to be able to sell and purchase the product through HondaOEM Product.
View detail