Reviews
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000
To new.
When replacing a tire, it is replaced with a new one.
The installed product was quite old, so it was new and clean.
The price was not that high, which helped.
View detail
Fits: KAWASAKI Z250SL, KAWASAKI Z250SL, KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI NINJA 250SL ABS, KAWASAKI NINJA 250SL ABS, KAWASAKI NINJA 250SL ABS, KAWASAKI NINJA 250SL ABS, KAWASAKI NINJA 250SL ABS, KAWASAKI NINJA 250SL ABS
neither good nor bad
I used it as packing when I replaced the Oil Filter in my Ninja 250SL. 'More expensive, but of higher quality!' I thought it would be a good idea to use the cheaper Other Brand Product packing, but the quality is the same, so the price is about the same. We also tried using another cheaper Other Brand Product packing, but the quality is the same, so we recommend you to choose the cheaper one unless you are concerned about the OEM product. View detail
Fits: HONDA CB900F, HONDA CB900F, HONDA CB750S, HONDA CB750S, HONDA CB750L, HONDA CB750K, HONDA CB750K, HONDA CB750K, HONDA CB750K, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB1100F
Oil change
I am replacing the seal along with the Mission oil change, but it is a bit expensive. It is just a sealing washer, but I feel it is expensive because Bolt is too cheap. View detail
Fits: HONDA PCX125, HONDA PCX160
Partial loss
There is a protrusion on the bottom where the mudguard rubber is attached, but it was missing in one place.
I won't return it because I drilled a hole for ETC (I used Screw instead).
This product was in Vinyl, which suggests that it is from the home country.
Well, that's how it is in a foreign country.
I will not be charging for returns or anything, but I am reporting this for your information.
View detail
Fits: HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100
Front cowl
Front cowl front fixed bolt.
It was not fixed properly, or I lost it and had to repurchase it.
HondaOEM Product, it is helpful that the same Bolt is sold.
View detail
Fits: HONDA SLR650 VIGOR, HONDA SLR650 VIGOR
The tightening section is ….
I replaced it with a new Cowl Fixing Bolt, but the tightening part is a (-) Minus shape, which is not a problem for fixing, but I would have preferred the old (+) Plus shape. View detail
Selection should be made with caution.
Here's a report I couldn't put on. (Lol) 。
This Switch is OEM and has a nice texture, but the latest Dio110 (Made in 2023) It is not possible to install it on the
Since the Dio110 does not have the Hazard function, I was wondering if it is possible to modify this switch to fit the actual car.
I considered using a Relay, but there were no holes to install it, so I ended up using a cheap Relay and another Switch.
If it were, Hazard could not be realized.
The shape and location of switches change with model changes, not only for Dio110, so pay close attention!
Purchase.
View detail
Fits: KAWASAKI NINJA ZX-7RR, KAWASAKI NINJA ZX-7RR, KAWASAKI NINJA ZX-7RR, KAWASAKI ZXR750R, KAWASAKI ZXR750R
Required for FCR Carburetor BodyAdapter
[How is it used?
Street Riding and Touring
Was the one you received as per Image?
The quality was poor compared to Vito.
Was the installation difficult?
Easy
How was your experience with it?
Worried about secondary Air due to thin Ring
[Included Parts:were they on?
None
[Was there anything that disappointed you?
OEM Product, so I had high expectations, but the quality was not as good as Vito's.
View detail
Fits: HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250SE
+a little more than usual (Plus) but
I replaced the bolt with a new Cowl Fixing Bolt, alternative part number:64512-KV3-831, but the tightening part is a -Minus shape, which is fine for fixing, but I would have preferred the old + shape. View detail
Fits: HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR500F H, HONDA CBR500F J, HONDA CBR500F K, HONDA CBR500F L, HONDA CBR500F M, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F
Alternatives...
If you order this part number:64507-MN4-000
Alternative part number:64508-ML7-921.
I would prefer +Plus instead of Minus tightening.
View detail
Fits: YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA MT10 (MT10MB), YAMAHA MT10 (MT10MCB), YAMAHA MT10 (MT10MCL), YAMAHA MT10 (MT10ML)
Genuine part damaged at some point before being shipped
This is an unusual one for me as I rate Webike at one of the highest standards in regards to packaging etc. This item arrived with a few other pieced. All the packaging inside was perfect, the outer box had zero damage but upon inspection, the box that housed this actual part had clearlt been dropped at some point before being shipped. A visible lip had been caused by this damage. Not a massive defect but enough to mean this had to be precision skimmed to remove the lip so the mating surface could be gained effectively. Communication for fraught, not an easy issue to deal with although Webike did offer a 1/4 of the price back. Never received this but hey, you live and learn. I will continue to use Webike as they are generally a great company to deal with. View detail
Fits: SUZUKI Gixxer, SUZUKI Zixer(150)
AirFilter for Gixxer 150 (OEM Product)
OEM Air Filter for Gixxer 150.
The installation of the Filter paper is very messy.
It was not this bad with a Chinese grasshopper air filter for YBR125 before.
I am sorry to hear that it is OEM, but is it India-made quality?
As for effectiveness, I don't see a problem.
View detail
Fits: KAWASAKI KLX230, KAWASAKI KLX230R, KAWASAKI KLX230R, KAWASAKI KLX230R, KAWASAKI KLX230R, KAWASAKI KLX230R S, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE
The price is high.
The positioning is different in length, but seems to be equivalent to NGK's NORMAL, but very expensive.
It is not durable for its high price.
I honestly don't know what the difference is.
I think $8,800 Plug for 250cc is insane:....
I can understand if it's motoDX, but it's a general Plug.
I'd like to see it from NGK:....
View detail
Fits: HONDA VT750S, HONDA VTX1300T AC, HONDA VTX1300T AC, HONDA VTX1300T A, HONDA VTX1300T A, HONDA VTX1300R AC, HONDA VTX1300R AC, HONDA VTX1300R A, HONDA VTX1300R A, HONDA VTX1300C AC, HONDA VTX1300C AC, HONDA VTX1300C A, HONDA VTX1300C A, HONDA VT750RS AC, HONDA VT750RS AC, HONDA VT750RS AC, HONDA VT750RS A, HONDA VT750RS 3AC, HONDA VT600CD2 AC, HONDA VT600CD2 AC
Great
I made this purchase and was very happy when I saw that I would receive my items in just a matter of 3-4 days. AMAZING! As it came on timeThank You very much. I recommend Japan Webike for all your motorbike and auto parts. Thanks again. View detail
Fits: HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750
Nice
Made another purchase as I am very happy with Japan Webike service which is outstanding, this is also regards their shipping. They are very prompt and I will always recommend them. Thank youJapan Webike. View detail
Fits: HONDA VF1000F A, HONDA VF1000F AC, HONDA VF1000R A, HONDA VF1000R A, HONDA VF1000R AC, HONDA VF1000R AC, HONDA VF700F A, HONDA VF700F A, HONDA VF700F AC, HONDA VF700F AC, HONDA VF750F A, HONDA VF750F A, HONDA VF750F AC, HONDA VFR700F A, HONDA VFR700F AC, HONDA VFR700F2 A, HONDA VFR700F2 A, HONDA VFR700F2 AC, HONDA VFR700F2 AC, HONDA VFR750F A
Awesome
Why buy in Europe when it's far cheaper to buy from japan. I always buy from webike if I need oem parts. Do yourself a favour. View detail
Fits: HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750
For tool boxes.
I bought it for an in-car tool box, but the large size is too small. But it is too small and the price is too high.
99008-02000 was better because it was less expensive and Larger size.
View detail