Reviews
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-10R, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZX-6R
Looks Parenthesis well!
Screen [Color] I'm switching to Smoke's stuff, so it's floating around with the OEM SilverBolt I replaced it with a Black Bolt
I like the fact that the included Washer is not visible from the Bolt
A 4mm hexagon is required for removal and a 3mm hexagon is required for installation
I honestly think $4,000 for 6 bolts is a lot of money, but it's not a consumable product and looks much better It's better, so that's good
View detail
Fits: HONDA CBR1000RR, HONDA CBR600F, HONDA CBR600RR, HONDA HORNET900, HONDA HORNET600, HONDA CB1000R (-2017)
convincing evidence
The CBR250RR, considering the upcoming trip to Circuit, etc (MC51) I bought the Brake Lever Guard for
If you search for Brake Lever Guard on the CBR250RR, you won't get much of a hit, and I didn't want to buy something cheap and regret it, so I went to a well-known manufacturer to see if I could get it for myself As I tried to buy it, I couldn't find a good product
The design is stiff and stiff for dress-up purposes, and the arm part is a plastic The product is also supplying Parts to MotoGP, which I personally thought was hmmm, and Stylish design by Valter Moto I came across the MotoComponents Lever Guard EVO
The description of this product may be exclusive to the CBR1000R depending on the shopping site Although it is HONDAUniversal Product and the description is slightly different, it is not On your Valter Moto Components site, you can find the following information on the Honda models The product number was almost the same in all of them, so I guess it's probably HONDAUniversal It is
Also, no one has been able to find out if this product can be installed on the MC51 CBR250RR or not, as far as I can tell from the Net I hadn't tried it, so it was a gamble to buy it, but I'm not sure if the CBR1000R or CBR600RR I've been referring to the images and comments on the Bar End exchange blog and other blogs of our predecessors " This should be able to be put on our Nidabo! " so I took the plunge and bought it without any guarantee of fit
As a result, I got there safely and easily (laughs)
The Instruction Manual has the following instructions to take the weight in the Handlebar It's listed, but I've been able to install it without taking it off, so I'm using it as is
Also, the attached Spacer should not make contact with the Brake lever of U-KANAYA When adjusted, the Arm of this product spreads outward, so the original Spacer It is additionally placed between the product and the Handlebar
Changed both ClutchBrake Lever to U-KANAYA Foldable's Gold I changed the color of Brake Lever Guard to Gold to match with the color of the But the color was slightly different
Valter Moto's BrakeGuard is a great choice to go with U-KANAYA's Gold Orange would have been better
It doesn't change anything dramatically when you drive on a regular basis, but it does change the way you drive on public roads when you accidentally hit or I think this equipment is necessary for safety in Circuit When you drive the car, you will be impressed by the Brake Lever Guard when you catch a glimpse of it The satisfaction level of the product goes up And still, the design is wonderful
The price is a bit high, but it's worth the purchase for safety and satisfaction
View detail
Fits: SUZUKI SV650, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R1000, SUZUKI SV650S, SUZUKI SV1000, SUZUKI SV1000S
Is it non-returnable?
sv650. i ordered them to fit the sv650s, but they don't fit at all! There's also an ad vise that says this is NG even though I order sv650x Parts every time don't you? View detail
Fits: HONDA CBR600F, HONDA CBR600RR, HONDA CBR900RR Fireblade, HONDA Hornet 600, HONDA CB1000R (-2017), HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR
I installed it on the one point of the look
It is much lighter than the OEM, so people were worried about vibration, but it was hard to get rid of it
Installation takes only a few minutes with Bolt On
I bought it again because of the dropout, but I have no complaints about it
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-S1000, YAMAHA YZF-R6, YAMAHA YZF-R6
Parenthesis better
Remove the OEM Nut and just replace it (Lol)
Parenthesis is good
But I am worried about the strength because it is aluminum It is not a thing to be taken off and put on and off so often
View detail
If it is a bit cheaper
It's expensive and the build quality is very good
If the price was a little lower, it would be a very good product, but I am using it and I am happy with it
View detail
A bit sorry
I used this product at the different Motorcycle with the Slider of the Balter Moto this time, so I chose this product this time, but it is a dull feeling Gold, the texture is not good, Large is also subtly small Smuck. It was a little disappointing. View detail
Fits: KAWASAKI Z750 (water-cooled), TRIUMPH DAYTONA675, TRIUMPH SPEED TRIPLE, TRIUMPH SPEED TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, HONDA CBR600RR, HONDA CBR600RR, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI Z1000 (water-cooled), KAWASAKI Ninja 1000 (Z1000SX), SUZUKI GSX-R600
It might be good as one point
OEM's Black Cap did not even complain.
However, I wanted to change the atmosphere slightly
So I tried to purchase.
Naturally it costs 6000 yen for this Cap
quality - It's both textured and colorful
It is a good feeling with Miyoshi Red.
Later, do not fade away by long-term use
You passed it..
View detail
No dissatisfaction
The accuracy is good as it matched the Screw hole batch. The texture is also good! But the price is a little expensive. I have not reached Mirror yet because I do not receive it. View detail
Fits: KAWASAKI Z750 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI Z750
Oil will be scratched every time of replacement
【What made you decide the purchase?】
In turning on the Babyface Engine slider, OEM's Filler cap can not be used, so we chose a product that has a small part on the surface.
【How was it actually used?】
Beautiful, you can remove Cap without problems.
【Was it difficult to install? (Hard parts case)】
Just tighten, but Anodized easily hangs. I wanted the part to put the tool not to Anodized.
【Please tell me the point of installation and hang (in the case of Hard parts)】
As you can scratch as much as possible, polish the tool and turn it lightly.
[Is there anything I was disappointed about?]
Because Anodized fades, I do not like it much. The whole was Powder coat, and the part where the tool enters should have turned to Hard anodized aluminum of No Color.
【Hope for Manufacturer - Please let me know if there are any improvement points; I think Design is good, but it is not possible to increase the number of scratches each time Oil is exchanged.
【Have you compared items?】 SSK Original Filler Cap
View detail
80 points
Function and feeling of use are no problem but Rear brake
Switch installation needs a bit of ingenuity f (^ _ ^;
Bolt and Nut on the Engine side of GEAR Chen
NORMAL It will be used by car.
After that Rear brake switch is NORMAL car
Although it is being attached to Rear Sets
This Parts attached Rear brake switch
I can not do things like that to footpeg
Processing is required.
View detail
The accuracy is not good - - -
I installed it together with the Exhaust System replacement.
I thought after receiving it at hand - - - heavy - - -
Because it is made of iron, it is heavy. And rust is made of iron.
A little rust came out from a bald part of the paint so I upgraded it.
It is processed by Logo Moto's Logo, but did you cut out with Hanger, Jigsaw or something in the first place?
BALI remains or marks cut out in the section of the cut surface remain.
Well, as it does not affect the function, honestly I do not need anything else.
Is this neighborhood ItalyQuality?. I do not care about the function, so it seems like a good idea - - -
Foreigners will hear that even if Wound enters the car's Bumper, they will not handle Wound,
To be honest, what is unique about the sensitivity of Japanese people.
I decided not to do Tandem so I can fulfill the function as Exhaust System Hanger.
However, if you also remove the footpeg of Left Side and the Right Side is attaching a heavier Hanger than footpeg, Quantity : Pair (for Left and Right) With regard to GSX - R 750 k 8 - L 0, I think that Balance of weight will change, and the other suitable Hanger is about RG.
Well I got cheap, so I complain luxuriously - - -
In general, is not it bad but is not it good.
View detail
Is good!
I installed it on Black of GSX-R1000 K8. I attempted to install around Cowl, but did not fit in the Bolt hole stopping Cowl and used it for Bolt of Front fender. Bolt is a feeling that it seems to be transformed at once.. For reference, there are For M6 and For M8, but the Spacer itself is the same in Large size. The diameter of the hole through which Bolt passes is somewhat different from Design. Poshetc. I will double the price of Spacer, but I think that Design is worth considering. The delivery date was 5 days. Fast View detail
Fits: SUZUKI GSX-S1000, SUZUKI B-KING, SUZUKI GSR750, SUZUKI GSR400, SUZUKI GSR600, SUZUKI SV1000S, SUZUKI SV1000, SUZUKI SV650S, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600
It is brilliant Design
The design of Balter moto components is still the highest level. Although there are times when I am bothered by lack of explanation or due date, I think that there is a value worth buying high money. I attached a black cap to the black of GSX-R1000 K8. I installed using a genuine O-ring. Installation is simple. There was also a story that other people's impression had oil leaks after installation, but in case of myself there was no problem. The delivery date arrived early, arrived in 4 days. I was prepared to wait, so I felt very got it. There are many other products of the oil cap, there are abundant subjects for comparison, but the product of the balter is wonderful. It is a unique design that is unique to Europe. It's a bit of an accent, but the eye catches up and I am dying in Etsu. I think that there are ways to have fun, owning, riding, touching, watching bikes, "Watch" It is recommended for those who enjoy pleasure. View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSR600, SUZUKI GSR400, SUZUKI GSR750, SUZUKI Gladius 650, SUZUKI Gladius 400
I'm sorry
I attempted to install it on SEA BASSGSX - R1000 K8, but it was impossible. I think that it was because I exchanged OEM 's Tank cap with Tank cap of Balter MotoComponents. I wanted to replace Bolt of Stainless Steel that was attached when exchanging Tank cap ... with Black ... I think that there is also a lack of confirmation of my own, but in the Tank cap of the same Balter MotoComponents, the name Tank Bolt I think that it is strange that you can not install what you sell at View detail
It's pretty good
I purchased it because the installation position of the exhaust system of FZ 8 and FZ 1 was the same.
My motorcycle has been replaced with a Slip-on Silencer for the Exhaust System, but it is similar to the OEMExhaust System, so it could be installed in the FZ 1.
Passenger peg has been removed, but the opportunity to Tandem is almost Zero so we only have to return it at the time of vehicle inspection.
I'm Steel, so I'm worried about Rust.
I wish I could have been made of Aluminum if possible ...
Exhaust System It is good to have fixed Bolt and Color.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-S1000, YAMAHA YZF-R6, YAMAHA YZF-R6
It's pretty good
I attached Titanium nut, but I tried to buy it because the character was etched and Parenthesis was good.
Because the Stem shaft is visible because of Open end, I am requesting Hole Plug with One-off.
Strongly, Titanium has a sense of security, but it is a little worried about Aluminum.
In addition, I need a 36 mm Socket but I did not have a hand, so I went to the tool shop to buy it (I do not know how many times I will use it in the future ... f (^ _ ^;
View detail
Fits: YAMAHA MT-07, YAMAHA FZ1 Feather, YAMAHA FZ1, YAMAHA Feather 8, YAMAHA FZ8, YAMAHA Feather 8, YAMAHA FZ8, YAMAHA XJ6 Diversion, YAMAHA XJ6, YAMAHA FZ6-S Feather, YAMAHA FZ6-N, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA YZF-R6
Sorry a little
I installed it in YZF-R1 of the 2015 year but Oil seems to blur if I use the O-ring part with OEM, so it was disappointing because it looks good. Oil bleeding does not occur when using another O-ring, so I think that those who buy from now will be helpful. View detail
Fitting and texture as well ○
Purchase because it is necessary to remove Mirror on Circuit run. You can respond with Tie Wrap, but I also want to make it look cool. Was it perfect if Bolt was Aluminum Bolt of the same color as Body?. View detail
This is a photo of what arrived in my order from Webike .Only one piece of what should have been a two piece order and now after countless e mails still no response from Webike if you look at their listing for this part it shows a front and a rear brake r
This is a photo of what arrived in my order from Webike .Only one piece of what should have been a two piece order and now after countless e mails still no response from Webike if you look at their listing for this part it shows a front and a rear brake reservoir caps for the price listed. After waiting months for this order to arrive this is what I received a single front cap and now here I am going back and forth trying to get the missing part of my shipment please explain Webike just WHAT IS GOING ON WITH THIS ISSUE. All I am asking for is what I ordered and payed you for ,and considering just how much money I have spent with Webike on the two orders I placed with Webike is this how you do business.?...order # g00000050235N3 and yes we have been trying to address this issue through your Contact us link with no satisfaction View detail