Reviews
Great tweezers
Love these so far. They are a great build quality that feels sturdy in the hand.Works great and made from metal so it's more environmental and sustainable material. Pleased I avoid buying another plastic tool.definitely recommend View detail
Suitable for portable, not stationary
Purchased to adjust air pressure at Circuit.
Since the capacity is small, filling a single tire is not efficient because the air runs out. TradeOff is unavoidable if the limited loading space is to be used effectively.
It is not a quiet Type and is not suitable for home use.
The 100V power supply type is perfect for use as a portable Small Type Compressor with a generator.
Other negatives are reasonable considering the price and Size.
View detail
Aluminum Pipe is looking sharp.
I bought a long aluminum pipe for my own parts for CRF250RALLY. I used to cut it with an iron saw, but I think it is better to use SK11's Pipe cutter for clean cutting.
After deciding the length to be cut, use the Magic to mark a point on the Pipe cutter, place the round blade of the Pipe cutter on the point, and lightly tighten the Grip. When the markings are visible, turn the Pipe cutter further. You will feel resistance when you turn it, but when it becomes weaker, the amount of turning will be cut. If you continue to rotate the Pipe cutter, the Pipe cutter will make a horizontal gap, so you will need to increase the depth of the cut by pulling out the round blade further. After cutting, pull out the chamfering blade attached to the body to chamfer the inside of the pipe.
When determining the length of the cut, it is better to make adjustments by considering the thickness of the blade. In the case of an iron saw, the object is cut off with the tip of the blade on a line Image, but with a round blade, Quantity:Pair (for Left and Right) The body has a roller to hold the pipe in place. The body has a roller to hold the pipe in place. If the object is soft aluminum, the roller will leave marks if it is tightened too hard. If the holder of the round blade starts to wobble during use, which is rare, remove the grip cover and tighten the loose screws. The first marking is easy with aluminum, but difficult with steel, and be careful with plating pipe, which is slippery even after marking. The chamfering after the work is simple. The final chamfering should be done with sandpaper or a file or you will get hurt.
This tool is designed for Pipe, but I also use it for cutting and marking aluminum rods with an iron saw. The process is the same, but there is a limit to how far a round blade can cut a round bar. If the marking is on a line, it is easier to apply the cutting edge of the iron saw and fix it in place. In this case, the length of the cut is adjusted with a margin for the tip of the blade.
If you are a beginner, it is difficult to cut a round Pipe cleanly with an iron saw. It depends on the work environment, but it is a good tool to have.
View detail
Don't scratch it.
I purchased this tool for a different purpose than its original use, such as removing parts attached to resinous materials, where I don't want to scratch the surface.
It is resin, so it is not that strong, but it seems to be good for use to remove it by placing it in a gap without much force. The surface is covered with silicon rubber, which is also resilient and helps prevent scratches.
Since the price is not that much, you can give up even if it breaks after a certain amount of use.
View detail
Exchange for Refresh
I bought a used ZZr, a motorcycle that probably hasn't had its suspension linkage greased in 26 years.
It can be used normally, but the cap seems to come off easily.
View detail
Cut
The price is not that much, and it has a good feeling of ease of use.
The handlebar is large, easy to grip, and easy to apply force.
It is also nice to be able to change the position of the blade with Slide.
View detail
The same thing as 100s?
[How is it used?
Used to apply or scrape off Remover in paint stripping operations.
Was the one you received as per Image?
Not possible and not impossible as per Image.
I noticed later that it is almost the same as the one sold at 100s?
Are they differentiated by Carbon content, etc.?
How was your experience with it?
Quite easy to use.
Remover is Gel-like and hardens after a while.
When applied with a brush, the tips of the bristles immediately harden and Large strange.
This Scraper can be spread on Beauty and is useful for scraping off the paint when it peels off.
[Points to note]
Paint remover also attacks resin.
Inevitably, the tip of the Scraper will be scraped off by the release agent, so it is practical to replace it with a new one after a certain amount of time.
View detail
Aggressiveness to paint is plastic
I bought this to solve the Sticker hell that seems to be the end of the world.
Although it is a Stainless Scraper, it is not that aggressive to paint due to its tip shape.
I was able to remove Sticker quite well without chemicals.
It is by far easier to remove than plastic Scraper, but note that it is not as aggressive to paint.
View detail
Dirt removal
I bought this to remove stuck-on dirt.
It is not that expensive and seems durable.
In the image, I imagined it to be a little smaller, but it was a little larger than I expected.
The Wooden Handlebar section is also easy to grip and use.
View detail
Useful if you have it. I can manage without it.
The LEDs are ideal for observing areas that are not directly visible, such as the underside of the crankcase, which is dimly lit even during the day. Well, since it is usually dark in areas that cannot be seen, it makes sense that it is with LEDs. It is very convenient.
It also stretches quite well and does not flex when stretched.
View detail
For the Left Hand. You can beat the hell out of anything zakzaky!
For Left Handers. The Elastomer resin Grip is a good choice! Elastomer resin grips for non-slip grip!
NeedlesGold, Copper wire, Tin plate, Aluminum, Cardboard, Cloth, PPBandetc.Basically anything I can hit it off." is the appeal of this product.
Blades are rust-resistant Material:I'm glad it's Stainless Steel, it's a Commendation!
View detail
For cleaning complex shapes around the Engine
Engine fins and switches in the Handlebar.
Purchased to clean crevices in complex shapes.
I do this about twice a year, just to clean up all the little details.
Long cotton swabs are used in the gaps between Engine fans, Switches, etc.
It removes dirt and grime from even the most complex shapes.
This is convenient and useful.
View detail
Convenient but requires skill.
Chamfering tool for Gold parts.
I used it when I made the collar on a lathe to install a CRM50 Wheel on a DT50.
I decided to use it because I had removed it from the Zipper and because I had the tool on hand.
It is quite easy to remove at least a thread chamfer.
However, it is not suitable for Large beveling because the surface rattles depending on the amount of force applied.
Also, for beautiful circle chamfering, it is more recommended to use a large-grit drill, a conical chamfering tool, or a conical file (with abrasive particles electrodeposited) rather than a Chamfer Scraper, because they are cleaner.
In addition, the aforementioned The amount of force." However, there are more appropriate tools for hole chamfering, etc., so it is better to use those tools for clean machining.
View detail
Good for fixing when machining or fabricating Parts!
[How is it used?
I bought this for fixing when making parts for out-of-print cars and other parts fabrication and parts machining.
Was the one you received as per Image?
It is heavier than expected, quite sturdy and solidly built with no rattles, etc.
Was the installation difficult?
Bolt holes are provided for mounting on a workbench for easy fixation.
How was your experience with it?
It is very easy to use despite its compact size.
The small Vise can be securely fixed without shaking even when processing grinders, which is dangerous. It also makes it easier to file small parts, which greatly improves work efficiency.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
I have no complaints as it is very easy to use for the price and works beyond my expectations.
▼ I think it is such a useful tool that I wish I had purchased it earlier.
View detail
I think the sound is too loud.
It's enough to do a little muscle training? The weight of the machine is about 1,000 pounds.
The operating noise is noisy, perhaps louder than a motorcycle engine running at full speed.
If the electric Tucker is as good, you might as well go for it.
View detail
stain removal
I wanted something with a good spatula-like shape and some strength to remove bad stains, peel off adhered parts, etc. I found this one and bought it to try it out. The length, shape, and feel are good. The shape is quite sturdy and stronger than what I expected.
I would have liked something thinner that would be a little more flexible and bendable, but I thought this would work.
View detail
Convenient for details
Cotton swabs are weak and break easily, but this product is firm and does not break.
It is suitable for cleaning small areas such as gaps between the fins of the Engine Cylinder.
View detail
It cuts well.
It is easy to grip and cuts well, so you can cut with light force.
Ideal for cutting thick corrugated balls that are difficult to cut with regular Scissors.
Good durable scissors.
View detail
Well material
The moderate spring feeling makes it easy to use and does not grab the fingers. The shape is also comfortable to hold, making it easy to work with.
The angle of the tip is good enough to keep the gripped object without dropping it.
It is Stainless Steel, so it can be used for a long time.
View detail
be sharp
These scissors cut well. Suitable for putting on small parts.
Material:Stainless steel makes these precision gold cutting scissors very sharp and resistant to rust.
Easy to cut with light force.
View detail