Reviews
Too big, mostly for Wheel
[How is it used?
For undercarriage wash of Motorcycle
Was the one you received as per Image?
It is so much bigger than I imagined. It looks like the size of a car wheel brush. It has a Size feeling like a Brush for a wheel of a car.
How was your experience with it?
It is indeed flexible, but I think it is too big and not suitable for washing motorcycles. If it were half the size, it would be easier to wash the area around the rear shock and around the engine through the cowling, but I don't want to accidentally damage the paint with it.
It would be good for something like NAKED with an air-cooled engine.
[Points to note]
The bristles are too hard to wash painted surfaces, so it is mostly used around the feet and engine area.
[Opinions and requests to Manufacturer
Put it out half as fine as it already is.
View detail
Brake fluid replacement didn't seem to have much effect.
I used it to suck out Brake fluid. General Material with volume:PlasticSyringe.
It didn't suck air to the heck and worked fine.
Some of the imprints are. "Fluid makes the print disappear. but it didn't really go away in DOT4.
Well, the problem of the most Large is that the Fluid replacement by the suction out that I tried for the first time was not as smooth as I thought, and I thought that the One-Way Valve would be better…….
View detail
The capacity is Small and there are few uses for it.
I bought it because I was looking for a small type in terms of space.
I wasn't familiar with the capacity and power of the Compressor, so I did some research before I bought it.
But it was far less useful than I expected.
It takes quite a while for the Air to build up.
Blow the air at full force and it will be empty in a couple of seconds.
Because the output and tank capacity are too small rather than this MODEL is bad, the use of use is too little.
It will probably take a few dozen minutes to inflate a home Pool.
If you're going to use it for air blow or something like that, you'll want at least 1 horsepower.
View detail
Gasket cannot be used for hazing.
It's thick. It's thick anyway.
It is thicker than the general ones made of Gold.
Also Material:Because it is plastic, the strength is very weak, and it was not possible to remove the stuck Gasket. Finally, I had to grind the slotted screwdriver with Grinder.
Of course, you should not damage the surface per surface.:I think PlasticScraper is an option, but I don't think it's too easy to use and I don't think I'm going to repeat it.
View detail
It is no good at all..
I bought it for the purpose of removing moisture when using BLOWER at Compressor, but unfortunately it was not effective at all for that purpose.
It is impossible to understand what the role of this product plays when the product is not attached and the way of moisture does not change at all.
View detail
MDF Moody F Sticking Gauge for Rim Stripe
Be sure to order with Wheel sticker.
This Gauge comes in handy because it can be attached to Smooth, but if you buy it later with Single Body, it will be high in conjunction with the shipping fee.
It is really a substitute for the plate version...
View detail
Subtle w
【What made you decide the purchase?】 Required
For free shipping w
【How was it actually used?】 Required
Convenience degree if there is.
【Was it difficult to install? (Hard parts case)】 Any
【Please tell me the point of installation and hang (in the case of Hard parts)】 Optionally carefully w
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] Required
I think I can make it your own w
【Hope for Manufacturer - Please tell me if there are any improvement points] Mandatory What is Rim sticker bonus and yeah?
【Have you compared items?】 Required
None.
[Others] Any
View detail
Anyway cheap
The price is also cheap, but Case is also cheap. There was a dent already when opening it. The inside of Case is covered with machine oil, but it is gratifying, but it is sticky.
I do not know about the company named Cherry of the selling agency of this product, but Manufacturer Lissing Logo was printed with unreadable letters.
There is not a notation of "Made in ..." anyhow, it is stinky but Screw mountain Repair was done normally.
I will not recommend it to my friends, but I am interested in this company's Chain Tool.
View detail
Although used for Kawasaki z1, it interfered in the Sprocket hub, and it was not settled well and was not able to use.Incidentally a hub is normal.Regrettable.It is whether to have bought it, since the Alignment was taken even if it substituted the Laser
Although used for Kawasaki z1, it interfered in the Sprocket hub, and it was not settled well and was not able to use.Incidentally a hub is normal.Regrettable.It is whether to have bought it, since the Alignment was taken even if it substituted the Laser pointer, the straight stick, etc.although it will be a convenient Tool at the vehicles which a Clearance suits, of course. View detail
I want the form and die length of the pawl portion for fixation to lengthen a handle about 5 more cm and to consider the improvement as a device. It used and was a hot tool.
I want the form and die length of the pawl portion for fixation to lengthen a handle about 5 more cm and to consider the
improvement as a device.
It used and was a hot tool.
View detail
This is purchased in the situation which has only this although he wanted to pull out a Fluid and being searched from the Caliper in Brake OH. It pulls out to a Caliper Fluid pouring and after that as an aim, and was able to make it possible to
This is purchased in the situation which has only this although he wanted to pull out a Fluid and being searched from the Caliper in Brake OH.
It pulls out to a Caliper Fluid pouring and after that as an aim, and was able to make it possible to push a Brake fluid from a MASTER as actual work.
The
price is 500 yen or less hope.
After that [
], it sold also at the tool store at a low price, and was shocking in it.
View detail
It purchased to use it when sticking a rim stripe on the wheel of FZR1000. The R of the wheel was loose, it was not decided and a location was not able to be used after all. Since other persons' evaluation is high, it is unknown whether there is a
It purchased to use it when sticking a rim stripe on the wheel of FZR1000.
The R of the wheel was loose, it was not decided and a location was not able to be used after all.
Since other persons' evaluation is high, it is unknown whether there is any problem in how to use me for whether it changes with vehicle types.
View detail
It is user-unfriendly. Since capacity is small, it is troublesome, tightening a bolt repeatedly or - Loosening! However, since it is cheap, it is unavoidable. The recommend of the air-bleeding tool to which the tank was attached is carried out.
It is user-unfriendly.
Since capacity is small, it is troublesome, tightening a bolt repeatedly or - Loosening! However, since it is cheap, it is unavoidable.
The recommend of the air-bleeding tool to which the tank was attached is carried out.
View detail
Structure is sweet considering a price. . If there is little quantity even if it sucks up, although it is convenient if you are, it will be easy to carry out a back run. half the sum -- if -- the elasticity said if it is this price although it
Structure is sweet considering a price.
.
If there is little quantity even if it sucks up, although it is convenient if you are, it will be easy to carry out a back run.
half the sum -- if -- the elasticity said if it is this price although it can be convinced -- since it thinks that structure may be solid -- Two stars -- -
View detail