Reviews
Point Utilization
This time, my Point expired, so I bought TapTool, which I had wanted for a long time.
Repairing Bolts and Nuts that have become reluctant due to daily maintenance of cars, motorcycles, and othersMaintenance.
View detail
It can be used normally
Four types of Rivet are included, even for beginners.
Four types of Nose peas are also included.
Of course, you can Rivet properly.
There are expensive products, but this is enough for amateurs.
View detail
Usable as usual!
[How is it used?
I bought this for maintenance of my CD50, which is becoming an old car, because the screw holes and bolts are getting a little hard to turn due to rust.
Was the one you received as per Image?
It looks cheap, but it was my first tool, so it has the minimum functionalityQuantity:Set
How was your experience with it?
The case is a slide type, which is unexpectedly difficult to use, but the product itself is not bad and is still in this condition and durable even after several years of use. The functionality is also fine, and it is still in use.
[Points to note]
Please note that this product is for Steel, so Material:Cannot be used on Stainless Steel. It will ruin the tool.
How did it compare to other products?
This Quantity:Set is 20 piecesQuantity:It is a Set and Compact, but it is fully functional. Quantity in another company's product.:I was not sure about 1 Set of 40pcs. but I am glad I went with this one.
I feel like I can make original parts by molding the screw holes, etc., and I think I am going to get into it.
View detail
Handlebaretc.Easy to cut
It takes a long time to cut with a thread saw etc., and it is not possible to cut cleanly, but it takes a really short time and finishes cleanly. View detail
Handlebar fixing bolt is loose
The bolt that fixes the handlebar of both Tap and Dice tends to loosen, making it a little difficult to use. View detail
First Quantity:Just right for a Set.
I think it is necessary for Motorcycle maintenance such as machining and stripping each Screw lock agent.
However, the more you spend on this type of instrument, the better it is, but for me, I felt that this product had the best cost performance.
We feel that from this point, we can purchase the missing instruments on a case-by-case basis.
View detail
Easy drilling
Useful for removing Gas from Spray cans.
Tapping can cause sparks, so this product can be used to safely remove Gas.
It can be adjusted according to the thickness of the can, and the hole can be opened without effort.
This is helpful because it prevents the remaining contents from spewing out.
View detail
Safe Gas Extraction
This is a convenient and safe way to remove gas from spray cans after use. With Rubber Cap, it is easy to remove the gas from the can. View detail
eValue Lock hand clamp
I bought the Lock hand clamp from eValue. The lock hand clamp is very easy to unlock. View detail
Reassuring to have for machine maintenance
It is useful for re-cutting before recoil processing or when the condition of the screw mountain has become bad.
It is not as good as the quality of the high-end products including the attached Handlebar, but it is better than the Quantity:If you thought it was your first one for home use with Set, I think it's enough for your needs.
View detail
Kawasaki Fender Essentials
On Kawasaki FFenders, there is a Rivet stop on the Hose Bracket Fenders are not something you have to replace over and over again, and the price is important I bought it
I was prepared to use it because it was too cheap, but I was able to stop Rivet without any problem Multiple Rivets used in the ZX-6R 2016MODEL Fender are also included Even if you do and fail a few times, you have the peace of mind that you can start over
I still want to stop Rivet as per OEM rather than replace it with Bolt! But if you want to hold down Cost, this is the way to go
He is a good kid who is useful for more than just Motorcycle
View detail
Ideal for rebuilding Screw Mountain
The price was cheap and I was uneasy but it was able to be used without problems.
I am worried about durability, but now we can use it without problems.
High accuracy, ideal for rebuilding rusted Screw Mountain, hole.
View detail
Screw Mountain for correction
【What made you decide the purchase?】 Cheap price. I have a lot of frequently used Size.
【How was it actually used?】 As for Screw mountain correction, it is necessary enough
【Was it difficult to install? (Hard parts case)】 Any
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] In order to cut the thread newly, it seems that the hardness is insufficient. I tried to create a 7 mm Nut, but Screw Mountain is Small, so I'm concerned to tighten it strongly.
【Hope for Manufacturer - Please let me know if there are any improvement points】 I think it would be useful if you have a shorter Handlebar for Tap.
【Have you compared items?】 Cherry and 40PS of E Value
[Others] When installing Universal Front Fender, it entered diagonally from the position of Screw hole. We have recovered by Screw Mountain correction.
View detail
It felt nice.
I bought it to pack Handlebar.
I imagined it was sharpness or sharpness, but I could work more smoothly than I thought.
I think Cospa is nice..
View detail
Until now it seems like a lie!
As I wrote in the Title, I used threads or Grinder to cut off Pipe but it was not able to go around well and it was skewed, cut and not good. I used it for cutting Aluminum Pipe of 6 mm diameter and iron Handlebar this time. Aluminum Pipe was able to cut cleanly at ok..
Handlebar was turned back and turned back and it was possible to cut beautifully again in about 10 minutes. I planned to measure exactly with Vernier calipers but because the length was about 2 mm as a marking mistake, I usually say that this is fine with the usual case, but this time it was able to cut accurately 2 mm properly.
I think that it would have been better to purchase it earlier if this work could be done at this price.
View detail
The Frame of the ZOOMER was decomposed, and it rusted and purchased to drop. Although he thought that he would remove paint application of origin by a Paint remover, it did not permeate, but a crack is attached to point with this Wire, and it was
The Frame of the ZOOMER was decomposed, and it rusted and purchased to drop.
Although he thought that he would remove paint application of
origin by a Paint remover, it did not permeate, but a crack is attached to
point with this Wire, and it was made for a Paint remover to permeate.
This Size is a large object for area.
View detail
although I think that it can use enough now and that it is dissatisfaction with the part assigned to one for a while for newly turning off the Screw since it is used at least for cleaning of the Locke agent etc. -- correction of a screw thread -- if -- it
although I think that it can use enough now and that it is dissatisfaction with the part assigned to one for a while for newly turning off the Screw since it is used at least for cleaning of the Locke agent etc. -- correction of a screw thread -- if -- it is a product which can be used without a problem. View detail
Although I thought whether the Riveter was needed and it purchased for noise reduction material exchange of Cowls and a Silencer, and the kana which it becomes, and is hard to use since the price is cheap, this can be ordinarily used for except and finds
Although I thought whether the Riveter was needed and it purchased for noise reduction material exchange of Cowls and a Silencer, and the kana which it becomes, and is hard to use since the price is cheap, this can be ordinarily used for except and finds me useful.
He has no were also able to use the stainless Rivet pin and saying!! If there is a piece, I can use also for various work and will think convenient-ization really.
Since the pin of the
Rivet can also use the goods firm [ grade ] which are Home centers etc., it is used being pleasing.
View detail
It purchases in order to correct, since the Screw has stopped entering from the middle whether the mountain of the screw hole was crushed. Those of the Tap for [Size] and screw holes, and the Dice for Screws with two kind, As for a Size,
It purchases in order to correct, since the Screw has stopped entering from the middle whether the mountain of the screw hole was crushed.
Those of the Tap for
[Size]
and screw holes, and the Dice for Screws with two kind,
As for a Size, nine-kind 18of M3~M10 and M12
-M3xP0.5, M4xP0.7, M5xP0.8, M6xP1.0, M7xP1.0, M8xP1.25, M9xP1.25, M10xP1.5, M12xP1.75, and a Size are eyes the average.
In the case of
purchase, enough, cautions
[use]
and when correcting, it is cautious of the Size of a Pitch.
since the tool by which the tool which sandwiches good
and Tap with there being a Pitch gauge sandwiches
and the Tap with which 圧 loosens easily weakly, and a Dice has die length, it is unsuitable for a narrow place --
- if it actually uses, it can delete with a CHALY CHALY without resistance.
Although the
[general comment]
and price of a Screw which came to enter easily are easy at a low price, it can fully use.
The best for an introduction, since determination renders and it can shift to an expensive tool, even if it breaks.
As convenient as something, when you have, although it is not a tool used frequently.
View detail
It is cheaper than a Riveter of what!!
It is cheaper than a Riveter of what!! View detail