Reviews
Finishing touches change with tools.
[How is it used?
I am always playing and playing with Enduro on my off-road motorcycle. I am not a very good rider, so I always try to keep my motorcycle beautiful. If I am not a good rider and my motorcycle is dirty, I can't even look at it.
WAKO:Wako's Car Wash Brush for everyday car washing PP Predecessor (https://www.webike.net/sd/23289227/) I used to wash the garnish with this and wash the details with some random Brush around the place. I found this product that looks like it would appear in an Insta car wash video, so I bought it.
Was the one you received as per Image?
Brush is softer than I expected. Material seems to be poly.
How was your experience with it?
I think it is just right for around the LINK. I think it is a good idea to brush areas where you don't want to apply too much high pressure to prevent Grease from leaking out.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It is a RECOMMENDATION because a serious car wash will not only keep your car Beautiful because it is easy to find places that are poorly maintained, but it will also prolong the life of your Motorcycle. It is good to have the right tools to make it fun.
View detail
Car wash is a tool
[How is it used?
I play and play with Enduro on my Off-road motorcycle. I am not a very good rider, so I always try to keep my motorcycle beautiful. If I am not a good rider and my motorcycle is dirty, I can't even look at it.
WAKO:Wako's Car Wash Brush for everyday car washing PP Predecessor (https://www.webike.net/sd/23289227/) I used to wash the garnish with this and wash the details with some random Brush around the place. I found this product that looks like it would appear in an Insta car wash video, so I bought it.
Was the one you received as per Image?
The bristles of the brushes were stiffer than I had expected, but not too hard. The material seems to be made of pig bristle.
How was your experience with it?
It is best suited for washing the top bridge and other in-built parts of the car. The bristles are pig bristle and soft, so it is also good for use around the meter of on road vehicles.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It is a RECOMMENDATION because a serious car wash will not only keep your car Beautiful because it is easy to find places that are poorly maintained, but it will also prolong the life of your Motorcycle. It is good to have the right tools to make it fun.
View detail
Aluminum Pipe is looking sharp.
I bought a long aluminum pipe for my own parts for CRF250RALLY. I used to cut it with an iron saw, but I think it is better to use SK11's Pipe cutter for clean cutting.
After deciding the length to be cut, use the Magic to mark a point on the Pipe cutter, place the round blade of the Pipe cutter on the point, and lightly tighten the Grip. When the markings are visible, turn the Pipe cutter further. You will feel resistance when you turn it, but when it becomes weaker, the amount of turning will be cut. If you continue to rotate the Pipe cutter, the Pipe cutter will make a horizontal gap, so you will need to increase the depth of the cut by pulling out the round blade further. After cutting, pull out the chamfering blade attached to the body to chamfer the inside of the pipe.
When determining the length of the cut, it is better to make adjustments by considering the thickness of the blade. In the case of an iron saw, the object is cut off with the tip of the blade on a line Image, but with a round blade, Quantity:Pair (for Left and Right) The body has a roller to hold the pipe in place. The body has a roller to hold the pipe in place. If the object is soft aluminum, the roller will leave marks if it is tightened too hard. If the holder of the round blade starts to wobble during use, which is rare, remove the grip cover and tighten the loose screws. The first marking is easy with aluminum, but difficult with steel, and be careful with plating pipe, which is slippery even after marking. The chamfering after the work is simple. The final chamfering should be done with sandpaper or a file or you will get hurt.
This tool is designed for Pipe, but I also use it for cutting and marking aluminum rods with an iron saw. The process is the same, but there is a limit to how far a round blade can cut a round bar. If the marking is on a line, it is easier to apply the cutting edge of the iron saw and fix it in place. In this case, the length of the cut is adjusted with a margin for the tip of the blade.
If you are a beginner, it is difficult to cut a round Pipe cleanly with an iron saw. It depends on the work environment, but it is a good tool to have.
View detail
It can be used normally
Four types of Rivet are included, even for beginners.
Four types of Nose peas are also included.
Of course, you can Rivet properly.
There are expensive products, but this is enough for amateurs.
View detail
Fits: その他 Universal, その他 Universal
The length is good and ideal for Tappet adjustment!
I wanted to adjust Tappet and could not find Thickness Gauge, so I had to buy a new one!
I was looking for something as long as possible and easy to use with a small number of sheets, and I found what I was looking for!
Even in narrow and hard-to-access places, it makes the most of its length and bend to make a quick and easy decision!
My favorite
View detail
Purchase by wash for Vehicle途
[How is it used?
I bought it from Wheel Wash for Vehicle.
Was the one you received as per Image?
I use it on my motorcycle and car, and it lifts dirt well in both applications.
How was your experience with it?
However, it is not good at cleaning fine or deep areas, so it was used to wash surfaces in large quantities.
View detail
Exchange for Refresh
I bought a used ZZr, a motorcycle that probably hasn't had its suspension linkage greased in 26 years.
It can be used normally, but the cap seems to come off easily.
View detail
To remove Cowl!
This is an essential item for Cowl removal. It is recommended to apply grease to the joint part for the next time after the cowl is removed. View detail
easy to grasp
The Grip section is thicker for a stable grip. View detail
Reliable Brand
[How is it used?
I purchased this to strip the Liquid Gasket when replacing the Generator cover on the Rokudabo. There were various approvals, but I chose this one because it was made by DAYTONA, a reliable manufacturer.
Was the one you received as per Image?
It was smaller than I expected, but it was usable enough!
How was your experience with it?
As a Scraper, I was able to peel off Liquid Gasket well, so I am glad for now. I think there are other uses for it, so I will continue to use it. I have only used it once, so I don't know how durable it is.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Easy to use
I purchased this product to replace the Screen on my New ModelPCX125 JK05.
I used it because it looks hard and Large strange to remove the nail when removing Garnish.
The hardness was perfect and very easy to use.
If you have one, I think it will come in handy in the future.
View detail
Fits: Others
It can be done without it, but it is convenient to have it.
Material mounted on casting wheel for tubeless tires:This tool is used to attach the Air Valve from the back of the Rim so that it can be pulled out when replacing the Air Valve of Rubber.
It is not something that can be pulled by hand, so it is necessary to use a tool with a Quantity:Set and must be pulled.
The workability is perfect because it is a dedicated tool, and Valve can be replaced easily.
However, if you are creative, you can replace the valve without such tools.
Net. 'Hit it from the back and push it in.' Although such methods are widely used, it is possible to pull it out using simple objects lying around in a tool box without doing such barbaric things.
I won't write about it here because it is not the proper way to do it, but it is not difficult if you observe it carefully.
However, the same Pull out." But as one would expect from a specialized tool, the ease of doing so is overwhelming.
Once Quantity:Once set, the No worries about tools coming off." This is the most Large.
If you are a do-it-yourself Tire changer and want to change the Air Valve at least once a year, you may purchase it.
Since it is cheap, w
View detail
thin and light
Basically, you can use tools with the appropriate size, such as Socket and Glasses, but you should always have a MONKEY in your tool box, for example, to remove a Large Bolt that does not have the appropriate size.
This MONKEY is thin, light and very easy to use.
It may be the best MONKEY I have ever used.
View detail
Sturdy as expected.
The clutch is so tight that a cheap nut remover was damaged and could not be turned. As the description says, this one is for removing the clutch, and it did not damage the clutch.
Unfortunately, only 24mm and 30mm are available. We would like to have an intermediate 26mm.
View detail
as if it were indispensable
It's so simple, but it's such a good Tool that I don't think I could do without it.
There is a video from the Manufacturer on how to use it.
View detail
For disassembling the rear shock (removing the spring seat)...
The product is a tool that allows the Spring Seat, which receives the Spring, to be removed by wrapping the Tie Down Belt around the Spring and then retracting the ShockBody.
It is not easy to use, but it is easier to use than the type that hooks the Gold Hook and shrinks the Spring.
I am afraid that the Gold Hook type might gap the Hook and cause a loud wound on the Spring, and I am afraid that if the Hook comes off while shrinking, it will be nothing more than a joke (in the worst case, the strong Spring will go flying off). However, this product is safe because the Belt is completely circled around the Spring.
It's hard to use, though.
Also, it is inexpensive for this type of Tool.
The price is comparable to mass-market inferior products such as Sto0rt and Astro P0ducts.
Instead, the construction is not much different from the cheapest products of the same type.
But it is good because it can be used properly!
Even a firm spring can be compressed without deformation of the tool when the shock is compressed.
The simple shape of the fork allows it to be used for front forks as well, depending on the ingenuity of the designer.
Shrinking the Spring to loosen the Nut that holds the InnerCartridge ROD in place would normally require a special tool, but with this, it can be done! It can be done! (Though it requires a lot of ingenuity.)
This is an imprementation that is of almost no use to anyone since we normally do not disassemble Rear shock, but it is a Recommendation since it can be used normally.
View detail
Most convenient!
Cheap and easy, anyone can apply Rim sticker beautifully.
It's a great costumer!
However, be careful not to fold the front and back too many times or you risk breaking it! (!)
View detail
For cleaning spoke wheel
Tip Interference Wound Prevention Cap
It goes in between the fine Spoke wheel.
Easy-to-grip Grip
Good tools to do a good job
View detail
Off to wash the car
[How is it used?
I chose the cheapest and best in stock for Off Car Wash for Vehicle and this is what I got.
Was the one you received as per Image?
This is a common type of Car Wash Brush. I think it is the same no matter what you choose.
How was your experience with it?
The mud fell off well.
[Included Parts:were they on?
Nothing in particular
[Was there anything that disappointed you?
Nothing in particular. It's a good price.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Not particularly
View detail
Definitely buy it.
I thought it was paper, but it is Plastic.
Mist spray and don't mind getting wet.
If you want to put a Rim sticker on it, definitely buy it.
View detail