Reviews
Works great for washing narrow crevices!
[How is it used?
This cylindrical Car Wash Brush is useful for washing narrow crevices when washing a car.
Was the one you received as per Image?
The total length was longer than I expected.
Considering my carrying and storage situation, another 5 cm shorter would have been perfect.
How was your experience with it?
I forget the Manufacturer, but the diameter of the Brush is thinner than the similar product I used to use, making it easier to insert the Brush into more detailed areas.
Brush's hair is quite firm.
I don't think anyone uses it, but it should not be used on Tanks, Screens, or other areas where fine scratches caused by car wash are a concern.
As the product name says "Engine brush", it is designed to be used on areas that do not get scratched or bothered by washing.
I use it in places that are difficult to wash with Sponge or regular Brush, such as the gap between engines, the gap between spokes, and the gap between exhaust pipes.
It was a pleasant realization that not only can hard-to-wash areas be cleaned, but it is also much more efficient than washing with Dustcloth, etc., so the time spent washing the car can be reduced.
As shown in the product image, the needle Gold of the core can also be bent gnarly.
The needle Gold in the core is quite hard, so it can be washed well even when bent.
[Points to note]
Rubber cap is attached to the tip of the Gold needle, which is the core of Brush.
In the unlikely event that this is not noticed coming off, it is likely to cause serious damage to the vehicle body.
Does it have a rubber cap?" and it is safer to look at it from time to time (a similar product I used in the past had a rubber cap that came off).
*Parts that cannot be used
It cannot be used for areas that must be bent internally, such as the inside of a Handlebar Pipe.
As mentioned above, the core needle Gold bends, but it is quite stiff. It does not bend flexibly to fit the other side while inserting it into a gap.
View detail
Convenient for bore upetc. engine tuning!
It is useful when replacing the Gasket during engine tuning such as bore up, clutch replacement, oil cooler installation, etc.!
Old gaskets stick to the surface and are difficult to remove, so a cutter blade or similar tool is used to remove the gasket, but a scraper is more beautiful and quicker for detailed work.
The price is not so expensive, so it would be good to have one in the family.
View detail
Comes off easily.
I used it to remove a sticking Hose.
The Hose can be easily removed without much effort.
It is slightly thicker at the tip, so it would be easier to use if it were thinner.
View detail
Convenient for details
Cotton swabs are weak and break easily, but this product is firm and does not break.
It is suitable for cleaning small areas such as gaps between the fins of the Engine Cylinder.
View detail
Cheap and good
With Black, I did not feel any difference in color. It is normal Black and can be used without any discomfort.
It's cheap, so it would be a terrible thing to ask for more, but it is enough.
Reasonable and good paint.
View detail
Easy to use
Brush is shaped for easy gripping and holding.
The handle is not Gold, so it is not cold and comfortable to the touch, so it is not a burden to work with.
Brush is a little hard, so it rubs well and is effective in removing stubborn stains.
View detail
Hard texture.
As mentioned in the Title, it has a hard feel.
It is difficult to use on subtly curved objects such as Cowl, though.
Like Cylinder gasket, good for flat surfaces.
View detail
Easy to use
I use it to wash the engine fin. The minus shaped part of the handle is used to clean the gaps by applying Dustcloth.
The Brush section is prone to heaving, so care should be taken.
View detail
Just right for a little maintenance.
I had been using a Tray with a magnet, which was fine for placing Bolt nuts, but I wanted a Tray to place Parts on.
I bought a Small and it is just right.
Stainless Steel, so you don't have to worry about it, and if Grease gets on it, just degrease it.
The workability has been improved by being able to place the removed parts and bolts.
I also own a Tray that is larger than this, but I don't get much use out of it.
However, the price is a bit high.
View detail
It's an ordinary Sandpaper.
Used after Tank painting.
Purchased 1500 and 2000.
It is an ordinary water resistant Sandpaper
I am generally satisfied with the low price.
View detail
Carbon?
It was a Carbon Scraper, so I bought it to try it out.
Material, I am sorry to say that the appearance was not Carbon, which is normally Image. The color is black, and it looks like a resin material with C in it.
It is reasonably priced, compact, and can be used to remove dirt in places where you don't want to scratch.
View detail
For peeling of paint
I use it to strip paint. The risk of scratching the body is very high with Gold Scraper, and the Material:The cheap plastic ones are too soft and hard to handle, or they lose the paint stripper and quickly become unusable.
This Carbon Scraper has just the right amount of hardness and is not easily defeated by paint strippers, so it is very useful. For me, the large size is just right and easy to handle, so it has become a necessity for paint removal work. This time, I used it to restore the Sprocket to its original state after painting it black, and I am satisfied that I was able to restore the Sprocket to its original state before painting.
View detail
rust removal
I bought this to remove rust from screws and other parts.
The price is reasonable, and the brush part seems to be sturdy and can be used to some extent.
View detail
To relieve frustration
[How is it used?
I'm sure we've all had the experience of dropping a bolt or nut into a gap in the frame while servicing a motorcycle, only to have it end up further back when you try to remove it.
I dropped my Battery Bolt during maintenance the other day and it took me 5 minutes to find it. I bought this to save myself the frustration.
Was the one you received as per Image?
I couldn't really tell from the product photo, but the product I received had a place to hang it.
How was your experience with it?
I lifted a 27mm Socket that I had on hand, and it lifted beautifully.
27mm is surprisingly heavy, and Magnet's power is quite powerful.
The only problem is that the stretching part is weak, so if you try to lift something heavy, it will automatically stretch under the weight. (Lol)
[Points to note]
The Magnet is rather powerful, so I think it's safe to avoid using it near a smartphone or PC.
How did it compare to other products?
I think there are similar pickup tools in the 100 yen shops, but I chose this product because I felt the magnet was not strong enough.
I haven't compared them directly, but...
【Review】
The power to pick up is perfect.
The only thing I would like to see more of is the strength of the elastic part.
View detail
Convenient for cleaning hard-to-reach areas.
When you wash your car, the inside of the engine, etc., you can't use your brush.
I bought this to clean areas I can't reach.
Flexible, so you can use BrushBody in the right place.
It can be bent.
Brush is hard, so Engine fin, Suspension, etc.
It is useful for cleaning hard-to-reach areas, but Frame
If you rub a painted surface or a shiny resin part such as
Be aware that polishing scratches may occur.
View detail
Convenient to have just the right size
[How is it used?
In use for Motorcycle maintenance.
You can put Screw in it or use it to wash the carburetor.
It is convenient to use as a container and a plate.
Was the one you received as per Image?
It is as pictured, but a little small.
[Points to note]
It is said that "Large" is also "Small", so you might want to buy "Large".
It's not impossible to use it.
It's just a stainless steel plate, so there's nothing you can't change for 100 bucks…
It is convenient because it can be used in various ways during Maintenance.
View detail
Convenient to have. Inconvenient without it.
I'm sure it's available somewhere, but I can't find anything that looks good when I look for it.
Brake's maintenance and "Scale" I use it as a
Tie Wrap and Hose are included to help you secure it.
It's good to have one in your toolbox.
View detail
It is short and easy to use.
It is a short type scraper, but it is easier to use than it looks, and can be used effectively for removing labels, DialSticker and Room mirror Reverse side inspection markings. View detail
Compatible Size is 4mm/6mm wide!
It is important to note that the width of the Rim sticker is only 4mm/6mm, so if you want to use a thicker width, you will have to cut it yourself with a cutter.
It is also a good idea to degrease the Rim with alcohol before applying the Rim sticker, and then spray the sticker surface with a thin mist of soapy water.
View detail
It can cut thick material well.
It can cut cardboard such as Corrugated cardboard and fabric such as CarpetMatte and Dustcloth very well. It is easy to grip and the angle of the blade makes it easy to cut smoothly without much effort. View detail