Reviews
It is a required tool
I bought it to make Valve clearance adjustment
It's easy to use because it is set finely
While paying attention not to rust, I would like to use it for the Large thing
View detail
Adjustment required depending on Wheel
I bought it to VJR 125i because I did not have confidence to put it well.
It is a simple packaging that only Gauge sticks to the attached manual.
Since it was my first work, the attached manual is simple and appropriate, but I also referred to the video on Homepage.
First, it is an instruction to bend 90-degrees, but it cracked easily. (It repaired with Tape from the back. )
Also, it may be a problem of the shape of Wheel, but a part that folds and hits inside Wheel (The direction of narrow Gauge this time) It floated and it could not move steadily.
I cut the threshold that I had at home and adjusted the thickness.
Although it is after adjustment, I used Gauge for the 6 mm wide Tape, with less blur, I could easily paste it.
Although there are few opportunities to use, if there is opportunity to paste it is inexpensive so I think Merit is used.
View detail
Air tool essentials
A hole opened in the air hose that I was using before purchasing this Hose.
Since it has Coupling from its origins it is not a pain as it takes time and effort.
Although it is rounded when not in use, it can be rounded quite for Small Soane for Soft urethane.
I am satisfied with the price.
The image is light blue, but what I received at hand was Pink's Hose. Spec. Is it a change?
View detail
Detailed instructions are included although it is a low price!
Purchase to paste Rim tape.
I was deeply impressed to have this instrument with tax included 205 yen, up to the procedure manual to paste Rim tape.
Because the cheap Tape bought separately was a little wide, I used Cutter Knife to spread out the rectangular hole of this appliance.
(I think that it will fit with Tape of MDF)
I also succeeded in pasting successfully, thanks to the procedure manual even I of Rim tape pasting the first challenge.
View detail
Chain Alignment Tool
Up to now I have adjusted Swingarm's Memory as a guide, but by using this item you can now make more reliable adjustments than ever.
Improved sense of security after adjustment.
View detail
Both edges are good
A double-edged feeling is a good feeling.
Since the Grip part used items of wooden patterns so far
I change it here and it makes me quite comfortable.
It was exactly the fine fineness of the blade.
View detail
Used for MONKEYBore up
For MONKEYBore up this time, I need to change to Reinforced Clutch, I purchased it with Clutch holder to remove Clutch.
And the other day I disassembled Clutch for the first time, but I was able to secure firmly and disassembled Clutch.
After all, as you guys, there is only a disassembly for disassembling Clutch, but considering the emergency thing, I think that it was good to purchase for the sake of peace of mind that there is a special tool.
View detail
Off Used for the exterior of a car
Off Exterior Parts (Polypropylene) I used it for.
Since it is an old Motorcycle made in 1987, gloss does not return, but it got dirty as it was.
Just making the exterior a little Beauty really made it look good.
I recommend it because the capacity is also plentiful and the price is cheap.
View detail
It is better to be there
I think that it is an essential item if you paste Rim sticker. It is cheap.
It was able to process after 8 mm.
Anyway, if you have this Gauge and mist, you can stick it well with a monkey.
View detail
Paste work will be very easy!
【What made you decide the purchase?】
When pasting Rim stripe, I thought that it was absolutely easier.
I used it also in the explanation movie of pasting, so I bought it not to fail.
【How was it actually used?】
As you can see in the Instruction Manual and the commentary movie, first let the tip of the sticker pass through the hole of Gauge, then just slide this Gauge and it was attached easily and cleanly.
【Was it difficult to install? (Hard parts case)】
Thanks to this Gauge, sticker pasting was very easy.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Since this Gauge is for 4 mm and 6 mm Rim stripe, processing like image is required to use for 10 mm Rim stripe. (I processed Gauge for 6 mm. )
In this Gauge, the width of Gauge for 4 mm is 5 mm, the width of Gauge for 6 mm is 7 mm, and a hole wider 1 mm than the width of Rim stripe is opened.
So, so that it is 11 mm wide, mark with the ruler and a pen in the inside of the Gauge and cut it with Cutter Knife. (Cut it with FreeHand, but it can be used without problems. )
[Is there anything I was disappointed about?]
Actually I wanted to stick the sticker all over the outside of Rim, but with this Gauge the pasting position will be full inside.
It is safe not to go against the movement of Gauge quietly because the Line will be distorted when trying to stick it to the outside by force using this Gauge.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I want a Gauge to be put on the outside as well.
Also, if you can also sell Gauge for 10 mm you can save time of processing.
【Have you compared items?】
None. There is no substitute.
[Others]
Because it is a small product, you tend to lose track of it when you are absorbed in pasting work.
Also, when working outdoors it is necessary to be careful as it will be skipped if a strong wind blows.
View detail
Rim tape essential item!
The workability is different if there is this and there is not!
If there is nothing, it is only to stretch as a jiwiwa with the spacing between Rim outer circumference intact, but it is a very difficult technique for my clumsy person. This Gauge makes it easy to paste it as it is a guide of the tightening position.
View detail
Used for CUB90DX
Tappet sound has become considerable, so I tried to adjust and bought it.
Thickness Gauge was what I felt,
Tappet Looking at the site of the person who is adjusting, it was a tool to measure Clearance.
It was truly amazingly fluent and something like a plate, thought that I should use it like this.
This time 0. It is the use of 05 mm.
Since it enters in a bent state, it was easier to work than I thought, but since it is fluent at all, there are traces left when I tightened.
The price is not so expensive, I felt that Torque had uped when I adjusted Tappet, so I made a rating of 4.
View detail
Hot knife set
I did Ladder home center to do Plastic processing, but I was at a loss for not going anywhere but I was glad that I could purchase on Webike. Product price was also cheap and it was user-friendly as I thought. Just my way of using it I can do BALI on the cut surface quite well. Knife's melted plastic solidifies and it becomes BALI.
When we cut this BALI with Hot knife, BALI can be done elsewhere so only BALI eventually cut off with Cutter Knife. You may not be able to do BALI if you get better.
View detail
There are things that can be done with this tool
It is more suitable for removing the PlasticClip from the Gold genus Rim. But when you want to scratch without scratching as much as possible, this is recommended. Depending on how it is used, this is just as good as it is a little softer than others. Of course it will break if impossible..
There are cases where it can be used as a spatula besides Rimber if you think of usage.
I definitely want to put one in the tool box.
View detail
Sharp blade
Since the blade is sharp, I was able to remove Gasket BALIBALI. Also because Grip is Rubber, it was easy to add power.
It is a good Size for Gasket peeling such as Clutch cover.
View detail
To improve finish
I bought it together with Rim sticker. At first it did not understand how to use it, but it is better to purchase absolutely for construction errors and finish improvement. View detail
I had better be there.
What made you decide the purchase?】 From impule and price.
【How was it actually used?】 Convenient. Instruction Manual is kind and easy to understand.
【Was it difficult to install? (Hard parts case)】 Any item
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any item
[Is there anything I was disappointed about?] None.
【Hope for Manufacturer - Please tell me if there are any improvement points】 Maybe there should be 10 mm.
【Have you compared items?】 None.
[Others] Any item
View detail
It has used regularly since ancient times.It is strong and missing, or since there is nothing, it is always putting into a tool box.When removing a Navigation, Audio-system attachment, the inner tension of a Door, etc., I think indispensable tool kana.
It has used regularly since ancient times.It is strong and missing, or since there is nothing, it is always putting into a tool box.When removing a Navigation, Audio-system attachment, the inner tension of a Door, etc., I think indispensable tool kana. View detail
Since it has ridden on an old Motorcycle Inspection and repair is indispensable. It checks periodically and smooth every day!!A price is cheap. Since it did not sell to the Home center, it was saved.
Since it has ridden on an old Motorcycle Inspection and repair is indispensable. It checks periodically and smooth every day!!A price is cheap. Since it did not sell to the Home center, it was saved. View detail
I regard a Rim sticker as this becoming necessaries in order to stick simply. Since a crack will go to a Wheel if it does not come out after wiping a Wheel firmly, it is a Point which takes care.
I regard a Rim sticker as this becoming necessaries in order to stick simply. Since a crack will go to a Wheel if it does not come out after wiping a Wheel firmly, it is a Point which takes care. View detail