Reviews
With no losses
I bought it for checking the amount of Engine oil in MT-07.
You can check the amount of Oil by putting the vertical state across the Motorcycle and copying the Oil window to the mirror of this product.
Misuse prohibited! (Lol)
View detail
Easy to use
Although it may be a type of exhaustion type, it is okay to keep it as a tool if you think of Material.
Since it is paper on Material, it will be weak against moisture,
If you change the material, the price will also rise so perhaps the current situation may be the best.
View detail
Chain can be adjusted accurately
It is useful for Chain's tightening adjustment. Swingarm's scale is Quantity : Pair (for Left and Right) This product is useful because it is difficult to understand if it matches. Attach the Red Parts to the Sprocket, from which straight rods and Chain are parallel and Quantity : Pair (for Left and Right) Adjust Chain subtraction of. Chain and Sprocket wear unevenly when traveling with the Chain line shifted. In the worst case Chain is out View detail
good
It is cheap and has high Cost performance. 1pc. If there is one it is an organism. I think that it will not be damaged by buying it. Tappet adjustment etc etc. I tried to use it for purchase. There were 23 peas, even if the car type changed, I bought it without any problem and I thought it would work. View detail
There seems to be quite a long time ago ...
After all, it is a classic car wash Brush. It seems to be quite unusual. There is a short on Home center, but since this Length is missing, this will be. View detail
Tapered shape is Good
Motorcycle's Tappet is in the back, and the usual rectangular Thickness Gauge is hard to use. This product is superior to that point. However, it was somewhat disappointing that the thicker thing is slightly out of the Size range I would like to use. (I felt that I wanted Shift to a slightly thinner side. ) Naturally, it is essential to choose a Set whose thickness you want to use is covered beautifully. View detail
It's cheap and cheap!
Cheap holds, cheap to use!
It was cheap to use than I thought!
It is quite a good product.
It is annoying that there are more than 60 letters or tied up to write impression!
If there is something to tie down, it will get worse writing imp.
More freely - - - -
View detail
You can cheap!
It is very easy to paste Rim stripe. 1 pc It can be pasted in less than 5 minutes.
By the way, it took about 10 minutes to bend when I stuck it without using one place.
View detail
I was able to paste easily.
It was easy to put on and clean.
It is satisfying because the price is also cheap.
However, since I wanted to stretch a 10 mm Tape for myself,
Please produce and sell 10 mm wide Gauge.
View detail
Nevertheless
Crankcase, Cylinder, Others when Rose Engine It was used for Gasket removal of various mating faces. Until now, we used inexpensive items such as 100 YenShop, but the accuracy is totally different, resulting in a pretty beautiful finish. I also have a solid part of the handle, it seems to be used for a long time. But it is still expensive. View detail
The first person is necessities!
"MDF Moody F : Mirror Rim Stripe 6 M "purchased at the same time purchased.
For price, it is reasonable at 205, so if you are not confident in pasting, we recommend you to purchase at the same time. By using it, even I am an amateur, I could paste it quite nicely.
View detail
Be firm
Slotted screwdriver has heartfelt things, so I bought a special item. I thought that the subtle bending of the tip was very easy to use. It is much easier to put in force than Slotted screwdriver. This is 8 Inch, I also bought a 12-inches one, but one more step Small (6 Inch? I thought it would be nice if there was. View detail
Attention to the corresponding Size
It is not exclusive to MDFRim tape, but it can also be used for other companies' Rim tape if only Gauge width is met
But I myself purchased 8 mm Rim tape and did not use this Gauge
Please note that it is only 4 mm 6 mm
Cutteretc Gauge width. If you process with (Body is a plastic) I think that it was used.
View detail
It is easy to use
I used it for the exchange of Rear caliper OH & Hose of vmax 1200. Reserver Tank including Line almost Almost all Start from Fluid Inspiration, but how to use according to Instruction Manual (Connect this Changer to CaliperNipple, put Fluid in Reserver tank and pull it with Changer from Caliper side) It was really quick until Pedal got a response. Normal bleeding is necessary from there, but it will not take so much time from this state anymore.
Also, unlike the product photo at the moment, Bottle has a heavy Bottle cradle of Gold genus on the bottom of the Bottle so it is unlikely that the Bottle will collapse. Although it feels somewhat expensive, it is worthwhile, but the value for that part seems to be effective due to time and effort shortening, but it was in the Instruction Manual as soon as water was used, but I tried hard, but Tube is White It got cloudy.. It seems better to think that Tube is disposable.
View detail
It is outstanding effect.
It is outstanding effect. If it is about a car wash scratch of a Plastic part, it becomes inconspicuous. Gloss comes out and it becomes very beautiful. It is easy to use without stickiness. Hebirote, so it is regrettable that if you dare say that the amount is small. I also use it for the car's Headlight lens, but it will be beautiful.
View detail
Is it expensive?
Buy with Stripe (Purchased at Point).
Working is improved if there is nothing if there is nothing.
Just when I first folded it seemed that there was no problem worried about?.
Just being able to lose it if you do not keep it is Large.
View detail
In the Clear part of the Meter panel
SmallWound has become conspicuous in Meter's Clear cover
I tried to buy it for a while.
I put a small amount on a soft cloth and it became Beauty when I brushed in a certain direction without much effort!
Because it seems that it can be used for Wond which is not so deep of Others resin Parts, I think that the range of use is quite wide.
View detail
It felt nice.
I bought it to pack Handlebar.
I imagined it was sharpness or sharpness, but I could work more smoothly than I thought.
I think Cospa is nice..
View detail
Easy to use
◦ 【What made you decide the purchase?】 Price easy to use
◦ 【How was it actually used?】 It can be used to take Push rivet which can be used for easy to use Seal
◦ 【Was it difficult to install? (Hard parts case)】
◦ 【Please tell me the point of installation and hang (in the case of Hard parts)】
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
◦ [Is there anything I was disappointed about?] Double-edged caster
? 【Hope for Manufacturer】 - Please let us know if there are any improvement points;
◦ 【Have you compared items?】 Sticker peeling of liquid (Daiso)
View detail
Master cylinder overhaul
I bought it for overhaul of Master cylinder.
It is indispensable when removing and inserting Snap ring.
The feeling of use also has rigidity, it can be used without any problem
It is truly KTC. Frequency of use is low tool, but it is troubled if there is nothing
It will be helpful as it is convenient.
View detail