Reviews
The tsubaki at the hand and the Cover at the tip are nice.
As expected from DAYTONA, it is well thought out.
There are some areas around the Engine that are quite sharp or Edge standing.
This Brush prevents the bristles from injuring the hand in such areas.
The rubber cover at the end of the brush is designed to prevent damage to the motorcycle parts by the brush.
It prevents
It is a larger size than expected, so it can be used to wash the engine part of the reverse side of NINJA's Exhaust System, etc.
It covers a large area, making it easy to work with.
Brush also has a waist, so I thought it should be used exclusively for Engine, undercarriage, etc.
View detail
Brush hardness is just right
I had been using a Nylon brush, but the length of the brush was not long enough and I could not wash it deep enough.
This product, Malbrush, has a thin handle that is easy to insert into gaps between Engines and Wheels, and has surprisingly many uses.
The other one is also easier to use because Brush is longer and softer.
There is no substitute for Home center.
Great for cleaning fins of air-cooled Engines.
View detail
Sorry if I'm not using it properly.
It snapped right off.
Because it's 16 degrees Celsius?
Because of poor usage?
View detail
Easy to use and satisfying
I am satisfied with this product because I can easily use it for easy cleaning of small areas, etc. View detail
Harder Brush
The Nylon brush is harder than I expected.
I wonder if a Paint brush would be safer considering the scratches.
It is
The waist is strong and can reach deep into tight places. is it good?
View detail
Great tool for the job
Been using a spring puller that was completely made out of metal, handle included. I love tools.I buy more than I need, and my more specialized tool usage is usually few and far between. That is not the case for a spring hook tool! This thing is simple, well made, and I've gotten way more use out of it than I initially thought I would. could not believe the difference a well designed spring tool makes.I had always used pliers, with springs flying everywhere and skinned knuckles This tool makes it simple and quick. It is so much better than playing the plier or screwdriver game when trying to install and remove some of those stubborn exhaust springs! View detail
Sharp Handle with care
I'm not used to this, so I had to cut the Outer tube with this one.
It needs to be used gently.
Material without changing shape:If there were Plastic's, I'm sure they would have enough use for it.
They won't be able to cut it down.
Well, I'm not happy with it, but I guess I'll keep using it.
View detail
First Quantity:Just right for a Set.
I think it is necessary for Motorcycle maintenance such as machining and stripping each Screw lock agent.
However, the more you spend on this type of instrument, the better it is, but for me, I felt that this product had the best cost performance.
We feel that from this point, we can purchase the missing instruments on a case-by-case basis.
View detail
For cleaning complex shapes around the Engine
Engine fins and switches in the Handlebar.
Purchased to clean crevices in complex shapes.
I do this about twice a year, just to clean up all the little details.
Long cotton swabs are used in the gaps between Engine fans, Switches, etc.
It removes dirt and grime from even the most complex shapes.
This is convenient and useful.
View detail
Convenient but requires skill.
Chamfering tool for Gold parts.
I used it when I made the collar on a lathe to install a CRM50 Wheel on a DT50.
I decided to use it because I had removed it from the Zipper and because I had the tool on hand.
It is quite easy to remove at least a thread chamfer.
However, it is not suitable for Large beveling because the surface rattles depending on the amount of force applied.
Also, for beautiful circle chamfering, it is more recommended to use a large-grit drill, a conical chamfering tool, or a conical file (with abrasive particles electrodeposited) rather than a Chamfer Scraper, because they are cleaner.
In addition, the aforementioned The amount of force." However, there are more appropriate tools for hole chamfering, etc., so it is better to use those tools for clean machining.
View detail
It makes a huge difference in the ease and cleanliness of the work!
I thought it was the right decision to buy it, even though it looks chubby.
Using this, I was able to apply it neatly without the need for water application.
View detail
To remove Dust Seal
[How is it used?
Fork oil leakage on HUSQVARNA TE250i after Enduro race and off-road driving, sometimes after washing the car.
RiskRACING SEAL DOCTOR Seal Doctor to take Fork's Garbage. Dust Seal Remover I bought this product to get a Dust Seal at
Before I bought this product, I had to carefully remove the dust seals with a slotted screwdriver, but with Remover, I can easily remove the seals and clean the forks much easier.
The price is inexpensive and I highly recommend it to Off-road riders.
View detail
Versatile Holding Tool for your Maintenance Needs
About quality and texture: I am happy with the quality of the band holder from ProTools, made from a steel construction with a PVC coating over the band to help improve it's hold. About the feeling of use: I have used this tool to hold the clutch and flywheel on my Honda Grom when removal of these parts were required for maintenance with great success. The adjustable band makes this tool very versatile for varies sized motorcycle parts. Products to buy together: Some more tooling like a center lock nut wrench would also be desirable to purchase along side the band holder so when it comes time to remove the clutch assembly and oil spinner on your Honda Grom you have all the special tooling required to complete the job. Difficulty of installation: The process to install takes a few minutes, place the band holder around the part that needs to be held and adjust the band if required. Tighten down the T handle so that the band holder does not allow the part to spin as you undo the fastener securing the part. Not difficult to do. Cost performance and comparison with other products: Good costing as this is a quality made band holder from ProTools that has with stood numerous usage without failure as compared to the first band hold that I purchased from another site that failed soon after. About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: These band holder are limited to the sized parts they can hold. No smaller the 6cm in diameter and no larger then 12cm in diameter. View detail
Good for fixing when machining or fabricating Parts!
[How is it used?
I bought this for fixing when making parts for out-of-print cars and other parts fabrication and parts machining.
Was the one you received as per Image?
It is heavier than expected, quite sturdy and solidly built with no rattles, etc.
Was the installation difficult?
Bolt holes are provided for mounting on a workbench for easy fixation.
How was your experience with it?
It is very easy to use despite its compact size.
The small Vise can be securely fixed without shaking even when processing grinders, which is dangerous. It also makes it easier to file small parts, which greatly improves work efficiency.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
I have no complaints as it is very easy to use for the price and works beyond my expectations.
▼ I think it is such a useful tool that I wish I had purchased it earlier.
View detail
Read the instructions for use and use tools correctly!
This tool is ideal for brake fluid replacement.
A Base is also included to prevent the Tank from falling over.
Fluid can be firmly removed by applying a certain amount of pressure.
However, care should be taken not to apply too much pressure, as the Tank may dent and break.
Since brake fluid is considered industrial waste, please dispose of the waste fluid after replacement at the nearest service station, motorcycle shop, or PartsShop.
View detail
I think the sound is too loud.
It's enough to do a little muscle training? The weight of the machine is about 1,000 pounds.
The operating noise is noisy, perhaps louder than a motorcycle engine running at full speed.
If the electric Tucker is as good, you might as well go for it.
View detail
Not sticky and easy to use
[Purchased for.
I replaced the Blinker with an Other Brand Product, but the wiring was more exposed than I expected, and although I think the product is Large and sturdy, it looked ugly, so I bought it for protection and to fix the appearance.
Impressions of use
While the Vinyl Tape on the market is sticky and not heat resistant, this one is not sticky and sticks to Beauty without stickiness, and it is also heat resistant, so it is perfect for wrapping Motorcycle wires and such!
It was very easy to work with because it was not sticky and I could take it off and rewind it again if I felt I had made a mistake.
Thanks to Wiring, we were able to hide and protect it very nicely, so if you are in the same situation, please give it a try!
【Review】
Cosy, no complaints!
Wiring is now clean!
View detail
For Parts Cleaning
[How is it used?
Used to clean Engine Parts of vehicles under Restore.
When I watch Restore videos, they all use a similar Brush, so where do they sell it? I was wondering, but when I went searching I found a few that are normal.
We purchased this product, which was relatively inexpensive among them.
Was the one you received as per Image?
It is just the right Size as shown in the picture.
Also, although the bristles are firm, I personally felt that they could be a little firmer. I personally felt that it could be a little firmer.
How was your experience with it?
The PVCNylon bristles, however, are not as firm, so it is somewhat difficult to remove stubborn dirt.
I think it is sufficient to remove ordinary dirt.
The hairs did not fall out during use.
[Points to note]
If you do not choose the right place to use it, you may scratch your car.
How did it compare to other products?
I used to do my best with Tooth Brush, but it was small and sometimes took quite a long time.
I felt that this product would be more suitable for use in non-narrow areas, etc.
【Review】
It was easy to use and inexpensive and necessary and sufficient for cleaning Parts.
Personally, I thought the hair could have been a little firmer.
View detail
Fine car wash good
It seems to be suitable for fine car washing.
Will use for next car wash.
View detail
Purchased to measure fork oil level
Used only to measure Fork oil level. It is not difficult to handle. View detail