Reviews
Handlebar fixing bolt is loose
The bolt that fixes the handlebar of both Tap and Dice tends to loosen, making it a little difficult to use. View detail
YAMAHA OEM Tappet Adjuster
I used to use wood screw for valve adjustment job in the past.This OEM tappet adjuster tool quality seems suitable for light work that it will see in a DIY .The square swivel does fit.I can use this tappet adjuster tool to adjust the valves on my yamaha TW200 motorcycle .this is by far theSl.The square drive fits perfectly.TW200 VALVES TICKING NOIZE LITTLE LOUDER THAN THE OTHER BIKES.The main purpose of tappet clearance is to allow a small expansion gap of the valve stem and pushrods to accommodate the effects of a heated engine.Using this handy tool can loosen or tighten the valve adjustment screw while holding the lock nut.I would say ,Very much needed tool.I should have buy this tappet adjuster tool earlier.Price is very reasonable and cheap.I'm very glad to have this tool.As usual package arrive on time.High Quality Packaging and Service.Thank You Webike.The best online Shop.I highly Recommended View detail
Just the right size
I have an example with a slightly larger size than this, but I bought this one because I felt like I couldn't hold it in terms of space.
It is just right in terms of Size feel. The dimensions and depth are as shown in the picture. It can be used mainly for placing tools in use or long items such as shafts, rather than small items such as screws.
If you want to place a screw or something, it would be better to choose Small Tray or Silicon Plate with Magnet from the same brand.
View detail
Cleaning brush!
Large sturdy, even when left on kerosene! View detail
Easy to use
It is a tool that uses the Lever principle to remove the interior of a car or other object.:Because it is plastic, it was easy to work on without scratching the interior. It is a standard product, but it is very useful. View detail
handy tool
This KTC stainless steel scraper is needed to remove the sealant remaining on the surface when repairing motorcycle engines. It is a set of two and can be suitable for scraping surfaces of different sizes. The wooden handle is easy to hold and the quality is also very good. Unlike The ones I bought before were sold out soon. The products of webike are really good and worth buying. -------------------------------------------------- -------- To repair the motorcycle engine to remove the sealing rubber remaining on the surface, this KTC stainless steel scraper is needed. It is two sets of scrapes that can be suitable for different sizes. I bought it quickly before , and Webike's product was really good and worth buying. Powered by Google Translator View detail
For cleaning inside Dust Seal
I use it to clean the inside of dust seals, etc. I am worried about scratches if I pry with a screwdriver, etc. With this, I can shift the scratches on the dust seals to the smallest original size. View detail
Dismantling essential
The motorcycle I ride is YAMAHA NMAX155. If the scooter needs to be repaired, you need to remove a lot of covers. If you use a metal pry, it is easy to damage these plastic parts. This amon plastic pry bar is very useful, and it is easy to remove the covers. There will be no damage, and the resin nylon is also durable. -------------------------------------------------- -------- The motorcycle I rode is YAMAHA NMAX155. If the pedal motorcycle needs to be repaired, many coverage parts need to be disassembled. If you use metal pry, it is easy to damage these plastic parts. There will be no damage, and resin nylon production is also durable. Powered by Google Translator View detail
Fits: YAMAHA TW200, YAMAHA TW225E
This would be useful.
The price is a little high, but it makes Spring replacement a cinch. View detail
Useful if you have it. I can manage without it.
The LEDs are ideal for observing areas that are not directly visible, such as the underside of the crankcase, which is dimly lit even during the day. Well, since it is usually dark in areas that cannot be seen, it makes sense that it is with LEDs. It is very convenient.
It also stretches quite well and does not flex when stretched.
View detail
Gaps in air-cooling fins do not reach deep enough.
Very easy to use as it can be rubbed vigorously.
The core is like a needle Gold, and if there is a gap of about 2 cm in diameter, it can be plunged and washed.
Convenient for washing off mud and oil, but not for washing gaps between air-cooling fins
The core is hard and does not bend limply
Maybe I'll bend it myself before I use it.
View detail
It's easy for anyone to use.
The Clip portion is +Red and -Black. and visually very easy to figure out!!!!
I have been using it for over 8 years with no problems. It is well made and
Compact and affordable! Impeccable!
View detail
Sturdy and easy for anyone to use
I have been using it for about 8 years now without any problems.
Just connect it to the battery terminal! The color of the Clip part is also very easy to understand!
I'd recommend it to everyone, because it's never a bad thing to have!
View detail
Somewhat difficult to use
I am using it to remove the cowl of a Ninja 250SL along with another Emon interior stripper.
I think this spatula is difficult to use because the handle has a little too much curve on it;
I use this spatula only for the parts that require a lot of force because it is thick and strong. It is not suitable for delicate work.
View detail
Just the right thickness! Easy to use!
I use it to remove Cowl from Ninja250SL. Anyway with moderate thickness and hardness.
Easy to use! Recommendation to remove the Cowl from Full CowlMotorcycle!!!!
View detail
For the Left Hand. You can beat the hell out of anything zakzaky!
For Left Handers. The Elastomer resin Grip is a good choice! Elastomer resin grips for non-slip grip!
NeedlesGold, Copper wire, Tin plate, Aluminum, Cardboard, Cloth, PPBandetc.Basically anything I can hit it off." is the appeal of this product.
Blades are rust-resistant Material:I'm glad it's Stainless Steel, it's a Commendation!
View detail
"Japan" Artisan handmade Scissors at this low price!
As the title says, each piece is handmade by hand by craftsmen in Japan.
This low price! And it has a fluorine Coat finish that prevents Tape from sticking!
Level high quality that I'd honestly buy it even if the price tripled! I recommend it to everyone!
View detail
over-priced goods
The tip is thick and does not bite into the Clip.
It needs to be thinner to be useful.
View detail
When using Driver Frustration." Decrease!
I'll start with the conclusion. You should definitely buy one." It is
It is used by screwing in the tip of the Driver, but it is common when using the Driver.
Bolts. Pollock." Prevents falling off.
If it falls down, it's in the Cowl or at night, it's lost or …StressMAX.
You can prevent it. This effect… for only a few hundred dollars! Absolutely. "buy" It is!
View detail
It is the best in the same price range, with many Gauge and good cosmetics.
It is a simple tool, so I chose it for its cost performance. 25 sheets are enough to use. The dimensions are Large and do not seem to be out of order. View detail