Reviews
nonfunctional
I understand that you use a syringe to decompress the Tank and suck it out.
It does not work at all.
In the end, it was a normal Air extraction while holding Lever.
View detail
I would like it to be attached to Rim stripe if possible.
We have applied MDF rim stripe to several (5+) vehicles in the past.
I had to replace my car for the first time in 9 months, and when I tried to apply Rim stripe, I could not find a special Gauge to apply it, so I had to order it again from webike.
I purchased a 6mm width rim stripe and was able to install it without any problem using Gauge, but I would like to see it included or packaged with the rim stripe if possible.
I would also like to see 8mm and 10mm affixed Gauge produced.
View detail
Fairly soft
Purchased to quickly wash Tire and Wheel.
If the hose is connected, it can be scrubbed while water is running.
The hair is quite soft and is recommended for a smooth flow around the feet.
The hairs are likely to be defeated by mud, etc.
I received what I was looking for in Brush, which is a good system for this kind of thing.
View detail
Bottle will be dented.
I purchased this product because I wanted to do the Fluid replacement myself.
As per everyone's impressions, use a syringe to set the Bottle's air pressure.
If you lower the Lever, the Bottle will be dented.
It may be better to work while niggling.
View detail
For Wheel and air-cooling fins!
I have not used it in a car wash yet, but I think it is just right for cleaning fins on wheels and air-cooled engines because of the tautness of the Brush. The handle is long, so it will be useful for places that are hard to reach. I think the price is high, but it seems to be durable. Therefore, I give it 4 stars for texture and 3 stars for cost performance. View detail
The same thing as 100s?
[How is it used?
Used to apply or scrape off Remover in paint stripping operations.
Was the one you received as per Image?
Not possible and not impossible as per Image.
I noticed later that it is almost the same as the one sold at 100s?
Are they differentiated by Carbon content, etc.?
How was your experience with it?
Quite easy to use.
Remover is Gel-like and hardens after a while.
When applied with a brush, the tips of the bristles immediately harden and Large strange.
This Scraper can be spread on Beauty and is useful for scraping off the paint when it peels off.
[Points to note]
Paint remover also attacks resin.
Inevitably, the tip of the Scraper will be scraped off by the release agent, so it is practical to replace it with a new one after a certain amount of time.
View detail
Reliable Brand
[How is it used?
I purchased this to strip the Liquid Gasket when replacing the Generator cover on the Rokudabo. There were various approvals, but I chose this one because it was made by DAYTONA, a reliable manufacturer.
Was the one you received as per Image?
It was smaller than I expected, but it was usable enough!
How was your experience with it?
As a Scraper, I was able to peel off Liquid Gasket well, so I am glad for now. I think there are other uses for it, so I will continue to use it. I have only used it once, so I don't know how durable it is.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Easy to use
I purchased this product to replace the Screen on my New ModelPCX125 JK05.
I used it because it looks hard and Large strange to remove the nail when removing Garnish.
The hardness was perfect and very easy to use.
If you have one, I think it will come in handy in the future.
View detail
Just right for disposable
[How is it used?
Used to clean parts during Restore of TZr50R.
I bought it because the price was low and the tips of the hairs I had before were becoming stiff.
How was your experience with it?
It was easy to hold and use.
The small size also makes it easy to clean the smallest of areas.
However, it may not be suitable for cleaning Large objects.
How did it compare to other products?
Although the quality is much lower than the slightly more expensive Brush, it was great for a simple cleaning of the Sunday mechanic. Especially when it comes to Restore, these supplies are cheaper and larger in quantity than in quality.
[Points to note]
There are three types of bristle tips, but use them with caution, as they may damage parts if used incorrectly.
View detail
Fits: Others
It can be done without it, but it is convenient to have it.
Material mounted on casting wheel for tubeless tires:This tool is used to attach the Air Valve from the back of the Rim so that it can be pulled out when replacing the Air Valve of Rubber.
It is not something that can be pulled by hand, so it is necessary to use a tool with a Quantity:Set and must be pulled.
The workability is perfect because it is a dedicated tool, and Valve can be replaced easily.
However, if you are creative, you can replace the valve without such tools.
Net. 'Hit it from the back and push it in.' Although such methods are widely used, it is possible to pull it out using simple objects lying around in a tool box without doing such barbaric things.
I won't write about it here because it is not the proper way to do it, but it is not difficult if you observe it carefully.
However, the same Pull out." But as one would expect from a specialized tool, the ease of doing so is overwhelming.
Once Quantity:Once set, the No worries about tools coming off." This is the most Large.
If you are a do-it-yourself Tire changer and want to change the Air Valve at least once a year, you may purchase it.
Since it is cheap, w
View detail
Bal Thailand Adjustment
As usual, the Ex side is adjusted with GapGap It hits 8mm Glasses, so it can be used if the round head is shaved off The accuracy of the square hole is also delicate The weakest as a weapon View detail
thin and light
Basically, you can use tools with the appropriate size, such as Socket and Glasses, but you should always have a MONKEY in your tool box, for example, to remove a Large Bolt that does not have the appropriate size.
This MONKEY is thin, light and very easy to use.
It may be the best MONKEY I have ever used.
View detail
For cleaning.
I bought it because it seems useful for cleaning carburetor and for cleaning tight places.
Quantity:1 Set of 5pcs. so it can be used in different places, which seems convenient.
View detail
That's about it
I used it for the first time and was able to adjust it. It would have been easier if the tip was cut thinner to make it easier to get into the gap. View detail
Sturdy as expected.
The clutch is so tight that a cheap nut remover was damaged and could not be turned. As the description says, this one is for removing the clutch, and it did not damage the clutch.
Unfortunately, only 24mm and 30mm are available. We would like to have an intermediate 26mm.
View detail
as if it were indispensable
It's so simple, but it's such a good Tool that I don't think I could do without it.
There is a video from the Manufacturer on how to use it.
View detail
For disassembling the rear shock (removing the spring seat)...
The product is a tool that allows the Spring Seat, which receives the Spring, to be removed by wrapping the Tie Down Belt around the Spring and then retracting the ShockBody.
It is not easy to use, but it is easier to use than the type that hooks the Gold Hook and shrinks the Spring.
I am afraid that the Gold Hook type might gap the Hook and cause a loud wound on the Spring, and I am afraid that if the Hook comes off while shrinking, it will be nothing more than a joke (in the worst case, the strong Spring will go flying off). However, this product is safe because the Belt is completely circled around the Spring.
It's hard to use, though.
Also, it is inexpensive for this type of Tool.
The price is comparable to mass-market inferior products such as Sto0rt and Astro P0ducts.
Instead, the construction is not much different from the cheapest products of the same type.
But it is good because it can be used properly!
Even a firm spring can be compressed without deformation of the tool when the shock is compressed.
The simple shape of the fork allows it to be used for front forks as well, depending on the ingenuity of the designer.
Shrinking the Spring to loosen the Nut that holds the InnerCartridge ROD in place would normally require a special tool, but with this, it can be done! It can be done! (Though it requires a lot of ingenuity.)
This is an imprementation that is of almost no use to anyone since we normally do not disassemble Rear shock, but it is a Recommendation since it can be used normally.
View detail
Most convenient!
Cheap and easy, anyone can apply Rim sticker beautifully.
It's a great costumer!
However, be careful not to fold the front and back too many times or you risk breaking it! (!)
View detail
For cleaning spoke wheel
Tip Interference Wound Prevention Cap
It goes in between the fine Spoke wheel.
Easy-to-grip Grip
Good tools to do a good job
View detail
Off to wash the car
[How is it used?
I chose the cheapest and best in stock for Off Car Wash for Vehicle and this is what I got.
Was the one you received as per Image?
This is a common type of Car Wash Brush. I think it is the same no matter what you choose.
How was your experience with it?
The mud fell off well.
[Included Parts:were they on?
Nothing in particular
[Was there anything that disappointed you?
Nothing in particular. It's a good price.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Not particularly
View detail